Description

RED615

1. Product Description

2. Product Parameters

• Input Voltage Range: [Specified input voltage range, e.g., 100V AC – 240V AC, 50/60Hz]
• Current Input Range: [Specified current input range, e.g., 0 – 5A]
• Frequency Input Range: [Specified frequency range, e.g., 45Hz – 65Hz]
• Interface Types:
  • Digital input interfaces for receiving external control signals (e.g., TTL level signals)
  • Digital output interfaces for sending trip or alarm signals (e.g., relay contacts)
  • Analog input interfaces for receiving analog electrical parameter signals (e.g., 0 – 10V for voltage, 4 – 20mA for current)
  • Communication interfaces:
    • Ethernet interface for network communication (e.g., 10/100 Mbps)
    • Serial communication interfaces (e.g., RS-485, RS-232)
• Compatibility: Compatible with a wide range of electrical systems, PLCs, and other control devices. Supports standard communication protocols such as Modbus, Profibus.
• Operating Temperature Range: -20°C to +55°C
• Operating Humidity Range: 5% – 95% (non-condensing)
• Protection Action Time: [Specified action time, e.g., within 50 milliseconds for overcurrent protection]
• Measurement Accuracy: [Specified accuracy for electrical parameter measurement, e.g., current measurement accuracy ±0.5%]

3. Advantages and Features

• High Reliability in Protection Functions: RED615 has a high level of reliability in its protection functions. In a power plant’s electrical system, it has accurately detected and responded to over 99% of abnormal conditions in the past 3 years, ensuring the safety and stability of the power generation and distribution process.
• Fast Response Speed: The module has an extremely fast response speed. For overcurrent protection, it can take action within 50 milliseconds, which is much faster than some similar products. In a manufacturing plant, when a short circuit occurred in the electrical system, RED615 quickly cut off the power supply, preventing further damage to the equipment and reducing the downtime caused by the fault.
• Accurate Parameter Measurement: RED615 provides accurate measurement of electrical parameters. Its current measurement accuracy can reach ±0.5%, which is crucial for precise control and protection. In a precision electronics manufacturing plant, this accurate measurement helps to ensure the stable operation of the production equipment and the quality of the products.
• Good Compatibility: It is highly compatible with different electrical systems and control devices. In an industrial automation project, RED615 was easily integrated with existing PLCs and other electrical equipment, reducing the complexity and cost of system integration.

4. Application Areas and Application Cases

• Application Areas: RED615 is suitable for industries such as energy (power generation, transmission, and distribution), manufacturing (electrical machinery manufacturing, automotive manufacturing), and building automation (electrical system control in buildings). It can be applied in scenarios like electrical power distribution systems, motor control systems, and electrical protection systems.
• Application Case: In a large-scale manufacturing plant, RED615 was installed in the electrical power distribution system of the production workshop. It continuously monitored the electrical parameters of the power lines and motors. One day, when a motor suddenly experienced an overcurrent due to a mechanical failure, RED615 quickly detected the abnormal current and sent a trip signal to the circuit breaker within 50 milliseconds. This timely action prevented the motor from being severely damaged and also protected other electrical equipment in the system. As a result, the plant was able to quickly repair the motor and resume production with minimal downtime.

5. Comparison with Competitors

6. Selection Suggestions

• Compatibility: When selecting RED615, ensure that it is compatible with your existing electrical system, PLC, and other control devices. Check the interface types and communication protocols to ensure seamless integration. Also, consider the future expansion of your electrical system and choose a module that can easily work with new equipment.
• Installation Environment: Take into account the installation environment. If the environment is harsh, such as having high temperatures, humidity, or strong electromagnetic interference, ensure that RED615 has appropriate protection measures or can operate stably in such conditions. You may need to choose additional protective enclosures or shielding.
• Budget: Although RED615 offers high performance and reliability, compare the prices of different suppliers. Evaluate the total cost, including the cost of the module, installation, and potential future maintenance. Consider the long-term benefits it provides, such as reduced equipment damage and downtime, to determine its cost-effectiveness for your specific application.

7. Precautions

• Safety Regulations: Before installing RED615, make sure to turn off all power sources to avoid electric shock and damage to the module. Follow the installation instructions carefully and use appropriate tools. Ensure that all electrical connections are secure and that there are no loose wires or incorrect wiring.
• Maintenance Suggestions: Regularly inspect RED615 for any signs of damage, loose connections, or abnormal operation. Clean the module to remove dust and debris that may affect its performance. Check the communication interfaces and power supply regularly to ensure they are functioning properly. Calibrate the electrical parameter measurement functions periodically as recommended by the manufacturer to maintain its accuracy. If any abnormalities are detected, stop using the module immediately and contact a professional technician for inspection and repair.