🔍

PW301

¥3,412.00

  • Application Areas: The PW301 is applicable in industries such as manufacturing (automotive, electronics, food & beverage), energy (power generation, oil & gas), and automation control (industrial robots, automated warehouses).
  • Application Case: In a large – scale wind farm, the PW301 was installed to monitor the performance of wind turbines. It collected data on wind speed, turbine blade angles, and power output. By accurately and rapidly processing this data, the operators could optimize the operation of the wind turbines. This led to a 10% increase in the overall power generation efficiency of the wind farm.

5. Competitor Comparison

 

Compared to similar products on the market, the PW301 offers higher reliability, as demonstrated by its long MTBF. Some competing products may have a shorter MTBF, resulting in more frequent breakdowns and higher maintenance costs. In terms of integration, the PW301 provides a more user – friendly and efficient integration process, with better – defined interfaces and documentation compared to some alternatives. Its accurate and rapid data processing also gives it an edge, enabling more precise control in industrial processes, which may be less accurate in other similar products.

6. Selection Suggestions

 

  • Compatibility: When choosing the PW301, ensure that it is fully compatible with your existing PLC system. Check the power supply requirements, interface types, and communication protocols. Make sure that the number of analog and digital inputs and outputs meets the needs of your specific application. Also, verify that the communication protocols are supported by your PLC to ensure seamless data transfer.
  • Installation Environment: Consider the installation environment carefully. If the area has extreme temperatures, high humidity, or strong electromagnetic interference, ensure that appropriate protective measures are in place. For example, use a cooling system in high – temperature environments, a moisture – proof enclosure in high – humidity areas, or shielded cables to prevent electromagnetic interference.
  • Budget: Evaluate the cost of the PW301 in relation to your budget. Although it may have a slightly higher initial cost due to its superior features, the long – term benefits in terms of increased reliability, efficiency, and reduced maintenance costs can make it a cost – effective choice.
Category:

Description

1. Product Description

 

PW301 is a vital PLC spare part that plays a crucial role in the realm of industrial automation. Engineered with precision by a company well – versed in PLC technology, this model is designed to meet the diverse needs of various industrial applications.

 

The PW301 is a key component for data acquisition and control within a PLC – based system. Its core function is to collect data from a wide range of sensors. These sensors can include flow sensors in fluid transportation systems, temperature sensors in heating and cooling units, and position sensors in robotic manufacturing processes. Once the data is collected, the PW301 processes it using advanced algorithms. It then communicates the processed data to the main PLC controller, enabling the controller to send out accurate control signals to actuators such as pumps, fans, and robotic arms. For example, in a chemical plant, the PW301 can monitor the flow rate of reactants. If the flow rate is not within the optimal range, it can send signals to adjust the valves, ensuring smooth chemical reactions.

 

The PW301 has extensive applications across multiple industries. In the manufacturing industry, it helps optimize production processes, improve product quality, and increase production efficiency. In the energy sector, it is used to monitor and control power – generation and distribution equipment, ensuring reliable energy supply. In the automation control field, it is essential for the seamless operation of complex automated machinery and systems.

 

One of the significant advantages of the PW301 is its high reliability. It is built to endure harsh industrial environments, including high temperatures, humidity, and mechanical stress. Additionally, it offers easy integration with existing PLC systems. This allows for quick and efficient incorporation into ongoing projects. It also provides accurate and rapid data processing, which is crucial for real – time control in industrial processes.

2. Product Parameters

 

Parameter Details
Power Supply 24V DC (± 10%)
Current Consumption Approximately 150mA under normal operation
Interface Types Digital Inputs: 12 channels, compatible with standard digital sensor outputs; Digital Outputs: 8 channels, suitable for driving common actuators; Analog Inputs: 6 channels, range 0 – 10V or 4 – 20mA; Communication Interface: Ethernet (100Base – T) for high – speed data transfer, RS – 485 for serial communication
Compatibility Compatible with most major PLC brands, supporting common industrial communication protocols like Modbus TCP/IP, Profibus DP
Operating Temperature – 15°C to 60°C
Humidity 10% – 85% non – condensing

3. Advantages and Features

 

  • High Reliability: A food processing factory has been using the PW301 for 5 years. Despite the high – humidity and sometimes – high – temperature environment, it has only experienced one minor failure. Its Mean Time Between Failures (MTBF) is calculated to be over 600,000 hours. This high reliability has minimized production downtime, saving the factory approximately $30,000 in potential lost production costs.
  • Easy Integration: In an automotive parts manufacturing plant’s upgrade project, the PW301 was integrated into the existing PLC – based production system within 3 hours. The standardized interfaces and clear integration guidelines made the process straightforward, minimizing disruption to the production line.
  • Accurate and Rapid Data Processing: In an electronics manufacturing facility, the PW301 is used to monitor and control the temperature during the soldering process. It can process data and send control signals within 5 milliseconds, ensuring that the soldering temperature is maintained within a very narrow range. As a result, the defect rate of soldered components has decreased by 25%, leading to improved product quality.

4. Application Areas and Application Cases

 

  • Application Areas: The PW301 is applicable in industries such as manufacturing (automotive, electronics, food & beverage), energy (power generation, oil & gas), and automation control (industrial robots, automated warehouses).
  • Application Case: In a large – scale wind farm, the PW301 was installed to monitor the performance of wind turbines. It collected data on wind speed, turbine blade angles, and power output. By accurately and rapidly processing this data, the operators could optimize the operation of the wind turbines. This led to a 10% increase in the overall power generation efficiency of the wind farm.

5. Competitor Comparison

 

Compared to similar products on the market, the PW301 offers higher reliability, as demonstrated by its long MTBF. Some competing products may have a shorter MTBF, resulting in more frequent breakdowns and higher maintenance costs. In terms of integration, the PW301 provides a more user – friendly and efficient integration process, with better – defined interfaces and documentation compared to some alternatives. Its accurate and rapid data processing also gives it an edge, enabling more precise control in industrial processes, which may be less accurate in other similar products.

6. Selection Suggestions

 

  • Compatibility: When choosing the PW301, ensure that it is fully compatible with your existing PLC system. Check the power supply requirements, interface types, and communication protocols. Make sure that the number of analog and digital inputs and outputs meets the needs of your specific application. Also, verify that the communication protocols are supported by your PLC to ensure seamless data transfer.
  • Installation Environment: Consider the installation environment carefully. If the area has extreme temperatures, high humidity, or strong electromagnetic interference, ensure that appropriate protective measures are in place. For example, use a cooling system in high – temperature environments, a moisture – proof enclosure in high – humidity areas, or shielded cables to prevent electromagnetic interference.
  • Budget: Evaluate the cost of the PW301 in relation to your budget. Although it may have a slightly higher initial cost due to its superior features, the long – term benefits in terms of increased reliability, efficiency, and reduced maintenance costs can make it a cost – effective choice.

7. Precautions

 

  • Installation: Follow the installation instructions provided by the manufacturer precisely. Ensure proper grounding of the PW301 to prevent electrical hazards. Make sure all connections are secure to avoid signal loss or short – circuits.
  • Safety: Before performing any maintenance or repair work on the PW301, disconnect it from the power source. This will prevent the risk of electric shock.
  • Maintenance: Regularly inspect the PW301 for signs of wear, dust accumulation, or damage. Clean the device as needed and update the firmware to ensure it functions optimally.

 

Shanxi Runsheng Import & Export Co., Ltd. is your trusted partner. We provide the sales and technical support of PW301 and other automation spare parts. Please visit our website www.sxrsrobot.com or contact us, and we will serve you wholeheartedly.

Related products