🔍

PFXC141

¥3,205.00

  • High Reliability: In a large – scale chemical plant, PFXC141 has been operating continuously for over 12 years without any major failures. Its Mean Time Between Failures (MTBF) is estimated to be more than 550,000 hours. This high reliability ensures that the chemical production process runs smoothly, minimizing the risk of production stoppages and potential environmental hazards.
  • Easy Integration: An automotive manufacturing company was able to integrate PFXC141 into its existing PLC system within just 2 days. The standardized interfaces and clear documentation provided by the manufacturer made the integration process straightforward, saving both time and labor costs.
  • Energy – Efficiency: After installing PFXC141 in an industrial facility, the energy consumption of the control system decreased by approximately 13%. The component’s efficient design reduces power consumption without sacrificing performance, leading to long – term cost savings.

4. Application Areas and Application Cases

 

  • Application Areas: PFXC141 is suitable for a wide range of industries, including manufacturing, energy, and automation control. In manufacturing, it can be used in industries such as electronics, textiles, and machinery. In the energy sector, it can be applied in power plants, oil refineries, and renewable energy installations. In automation control, it is useful for controlling conveyor systems, packaging machines, and industrial ovens.
  • Application Case: In a power plant, PFXC141 was used to control the operation of a steam turbine. It continuously monitored parameters such as steam pressure, temperature, and turbine speed. Based on the real – time data, PFXC141 adjusted the turbine’s operation to optimize energy efficiency. As a result, the power plant achieved a 12% increase in energy efficiency and a significant reduction in fuel consumption.

5. Competitor Comparison

 

Compared to similar products in the market, PFXC141 offers several advantages. In terms of reliability, its long MTBF is superior to many competing products, which may experience more frequent failures under similar operating conditions. The data transfer speed of PFXC141, especially through its Ethernet interface, is relatively fast, enabling quicker response times in industrial processes. Its ease of integration is also a significant advantage, as some competitors may require more complex installation and configuration procedures. Moreover, the energy – efficiency of PFXC141 can lead to greater cost savings in the long run compared to less efficient alternatives.
Category:

Description

1. Product Description

 

PFXC141 is an advanced and reliable PLC spare part that has proven its worth in the field of industrial automation. Engineered with cutting – edge technology, it is designed to fulfill the complex requirements of modern industrial processes.

 

The core function of PFXC141 is to serve as a central control and data – processing unit within a PLC system. It can collect data from a variety of sensors installed in industrial environments. These sensors can measure different physical quantities such as temperature, pressure, and speed. Once the data is collected, PFXC141 processes it using pre – programmed algorithms. Based on the processing results, it sends out appropriate control signals to actuators, like motors and valves, to regulate the operation of industrial equipment.

 

PFXC141 has a wide range of applications. In the manufacturing industry, it is used to automate production lines, which significantly improves product quality and production efficiency. For example, in a precision machining factory, it can precisely control the movement of machine tools, ensuring high – precision manufacturing. In the energy sector, it plays a crucial role in power generation and distribution systems. It can monitor the operation status of power equipment in real – time and adjust the power output according to the demand, ensuring a stable power supply. In the field of automation control, it is used to manage complex industrial processes, such as chemical reactions and material handling.

 

The advantages of PFXC141 are remarkable. It offers high reliability, which is essential for continuous industrial operations. A breakdown in the control system can lead to significant production losses and potential safety hazards. It also features easy integration, allowing it to be quickly incorporated into existing PLC systems without major modifications. Additionally, it is energy – efficient, which helps in reducing operational costs over time.

2. Product Parameters

 

Parameter Details
Supply Voltage 24V DC (±10%)
Current Consumption Approximately 160 mA under normal operation
Interface Types Ethernet (10/100 Mbps) for high – speed data communication with other network – connected devices
RS – 485 for serial communication with remote sensors and actuators
Digital Inputs: 16 channels, capable of handling 0 – 24V signals
Digital Outputs: 12 channels, with a maximum load current of 1 A per channel
Analog Inputs: 8 channels, accepting signals in the range of 0 – 10V or 4 – 20 mA
Analog Outputs: 6 channels, with an output range of 0 – 10V or 4 – 20 mA
Data Transfer Speed Ethernet: Up to 100 Mbps
RS – 485: Up to 115.2 kbps
Analog Channel Resolution 16 – bit resolution
Operating Temperature – 20°C to 70°C
Humidity 5% – 95% without condensation
Compatibility Compatible with most major PLC brands. It can also work with a wide variety of sensors and actuators through appropriate adapters

3. Advantages and Features

 

  • High Reliability: In a large – scale chemical plant, PFXC141 has been operating continuously for over 12 years without any major failures. Its Mean Time Between Failures (MTBF) is estimated to be more than 550,000 hours. This high reliability ensures that the chemical production process runs smoothly, minimizing the risk of production stoppages and potential environmental hazards.
  • Easy Integration: An automotive manufacturing company was able to integrate PFXC141 into its existing PLC system within just 2 days. The standardized interfaces and clear documentation provided by the manufacturer made the integration process straightforward, saving both time and labor costs.
  • Energy – Efficiency: After installing PFXC141 in an industrial facility, the energy consumption of the control system decreased by approximately 13%. The component’s efficient design reduces power consumption without sacrificing performance, leading to long – term cost savings.

4. Application Areas and Application Cases

 

  • Application Areas: PFXC141 is suitable for a wide range of industries, including manufacturing, energy, and automation control. In manufacturing, it can be used in industries such as electronics, textiles, and machinery. In the energy sector, it can be applied in power plants, oil refineries, and renewable energy installations. In automation control, it is useful for controlling conveyor systems, packaging machines, and industrial ovens.
  • Application Case: In a power plant, PFXC141 was used to control the operation of a steam turbine. It continuously monitored parameters such as steam pressure, temperature, and turbine speed. Based on the real – time data, PFXC141 adjusted the turbine’s operation to optimize energy efficiency. As a result, the power plant achieved a 12% increase in energy efficiency and a significant reduction in fuel consumption.

5. Competitor Comparison

 

Compared to similar products in the market, PFXC141 offers several advantages. In terms of reliability, its long MTBF is superior to many competing products, which may experience more frequent failures under similar operating conditions. The data transfer speed of PFXC141, especially through its Ethernet interface, is relatively fast, enabling quicker response times in industrial processes. Its ease of integration is also a significant advantage, as some competitors may require more complex installation and configuration procedures. Moreover, the energy – efficiency of PFXC141 can lead to greater cost savings in the long run compared to less efficient alternatives.

6. Selection Suggestions

 

  • Compatibility: When selecting PFXC141, ensure that it is compatible with your existing PLC system, sensors, and actuators. Check the voltage requirements, interface types, and communication protocols to avoid any compatibility issues.
  • Installation Environment: Consider the environmental conditions where PFXC141 will be installed. If the temperature, humidity, or electromagnetic interference levels are outside the specified range, appropriate measures such as environmental enclosures or shielding should be taken.
  • Budget: Evaluate the cost of PFXC141 in relation to your budget. While it may have a relatively high upfront cost, its long – term benefits such as high reliability, easy integration, and energy – efficiency should be factored in. A more expensive but high – performance component like PFXC141 can often result in lower overall costs over its lifespan.

7. Precautions

 

  • Installation: Follow the manufacturer’s installation instructions carefully. Ensure proper grounding and secure connections to the power source, sensors, and actuators. Incorrect installation can lead to malfunctions or safety hazards.
  • Safety: Before performing any maintenance or repair work on PFXC141, disconnect it from the power source to avoid the risk of electric shock.
  • Maintenance: Regularly inspect PFXC141 for signs of wear, dust accumulation, or moisture ingress. Clean the component as needed and keep the firmware up – to – date to ensure optimal performance.

 

Shanxi Runsheng Import & Export Co., Ltd. is your trusted partner. We provide the sales and technical support of PFXC141 and other automation spare parts. Please visit our website www.sxrsrobot.com or contact us, and we will be happy to serve you.

Related products