Grid view List view

Showing 11905–11916 of 19460 results

PCIE-6612

¥6,205.00

1.‌Parameters‌:

  • Counter/Timer Channels: 8, 32-bit
  • Digital I/O Lines: 40, TTL/CMOS compatible
  • Maximum Source Frequency: 100 MHz
  • External Source Frequency: 80 MHz
  • DMA Channels: 3 for high-speed data transfers

2.‌Specifications‌:

  • Bus Interface: PCI Express
  • Logic Levels: 5V TTL
  • Software Support: NI-DAQmx driver software
  • Timing Chip: X Series NI-STC3 for advanced triggering and synchronization

3.‌Dimensions & Weight‌:

  • Exact dimensions and weight are not explicitly mentioned in the search results.
  • However, as a PCIe device, it is designed to fit standard PCIe slots and should be lightweight for easy installation.

IC695CMM004

¥6,320.00
  • ‌Series‌: GE Fanuc RX3i PACSystems
  • ‌Dimensions‌: Not specified, but typical industrial modules are compact
  • ‌Weight‌: Not specified, varies based on manufacturer and packaging
  • ‌Features‌:
    • 8 independent and isolated serial ports
    • Configurable as Modbus Master/Slave, CCM Slave, DNP3 Master/Slave
    • RS-232, RS-485, RS-422 serial communication
    • Full/half-duplex operation
    • Fault status reporting, port-to-backplane isolation

WOODWARD 9907-018 2301A

¥6,235.00

1.‌Parameters‌:

  • Model: 9907-018 2301A
  • Input Channels: 8 analog input channels
  • Output Channels: 4 analog output channels
  • Input Voltage Range: ±10VDC
  • Output Voltage Range: ±10VDC
  • Input Impedance: 250Ω, 500Ω, 1200Ω, 2500Ω
  • Accuracy: ±0.10% F.S.
  • Response Time: 200ms
  • Operating Temperature Range: -40°C to +70°C

2.‌Specifications‌:

  • Controller Type: Digital speed controller
  • Compatible with Woodward SPM-A synchronizer for automatic generator load control
  • Process input/output control and automatic power transfer and load control

PM825 3BSE010796R1

¥6,235.00
  • ‌Series‌: S800 series processor module
  • ‌Dimensions‌: 12x12x12 (approximate, may vary)
  • ‌Weight‌: Not specified, but typical industrial modules are lightweight
  • ‌Voltage‌: 220V
  • ‌Current‌: 5A
  • ‌Resistance‌: 5Ω
  • ‌Features‌:
    • High-precision control
    • Multiple control modes (position, speed, torque)
    • Real-time monitoring of servo motor status
    • Rich communication interfaces (Modbus RTU, Modbus TCP/IP, etc.)

FBM201 RH914SQ

¥4,251.00
  • ‌Parameters‌: Input voltage range of 12-48VDC, output voltage of 5VDC, maximum output current of 10A, and efficiency greater than 90%.
  • ‌Specifications‌: Designed for industrial automation applications, with a 32-bit RISC processor.
  • ‌Dimensions‌: 170mm x 105mm x 32mm.
  • ‌Weight‌: Approximately 120g to 0.82kg, depending on sources.
  • ‌Series‌: Part of the FOXBORO FBM201 series.

95UVS2-1

¥6,235.00

1.‌Parameters‌:

  • Sensing Range: 190-350 nanometers of the ultraviolet spectrum1
  • Sensitivity: High, capable of detecting small flames1
  • Input Signal: 4-20mA analog input signal and red digital pulse input signal1

2.‌Specifications‌:

  • Designed for real-time, fast response to flame signals2
  • Suitable for detecting flames from alkyl, olefins, alkanes, and other combustible gases2
  • High temperature stability and reliability for long-term stable operation1

3.‌Dimensions & Weight‌:

  • Size: 119mm x 89mm x 70mm (as mentioned in one source)1
  • Weight: Approximately 1kg (estimated based on typical industrial scanner weights; exact weight may vary)3
  • Note: Another source mentions 56*89mm for dimensions, which could be a typographical error or a specific variant. Always refer to official documentation3

3IF661.9

¥4,695.00
  • ‌Parameters‌: Voltage: 24V, Current range: 100-400A‌1
  • ‌Specifications‌: Designed for use in B&R industrial automation systems, offering reliable performance‌1
  • ‌Dimensions‌: Exact dimensions may vary, but typical industrial modules are compact for easy installation
  • ‌Weight‌: Approximately 2KG‌1
  • ‌Series‌: Part of B&R’s 2005 series interface modules‌1
  • ‌Features‌:
    • Equipped with communication interfaces such as RS485, enabling data exchange and communication with other devices^^
    • Electrical isolation for enhanced safety and reliability^^
    • Supports Profibus DP protocol, facilitating integration into various automation networks^^

TC-RPFM01

¥6,532.00

1.‌Parameters‌:

  • Brand: Honeywell
  • Model: TC-RPFM01
  • Voltage: 24V (mentioned in context with other products)1
  • Work Voltage: 455V (specific to TC-RPFM01)1
  • Output Frequency: 532 kHz1

2.‌Specifications‌:

  • Designed for use in industrial automation and control systems1
  • Part of Honeywell’s DCS or automation module range23
  • Provides advanced control and monitoring capabilities1

P0912XX

¥6,235.00

–‌Series‌: FOXBORO P09XX Series

–‌Parameters‌:

  • Voltage: Depending on the model, it can operate with a wide range of DC or AC voltages suitable for industrial applications.
  • Current: Designed to handle significant current loads, ensuring reliable power supply and control.

–‌Specifications‌:

  • High availability with redundant path control servers1.
  • Configurable for various automation tasks, including process control and monitoring2.
  • Advanced diagnostics and monitoring capabilities1.

MVI56-PDPMV1

¥6,352.00

1.‌Parameters‌:

  • Communication Protocol: PROFIBUS DP V1
  • Supported Services: Class 1 and Class 2 DPV1
  • Processor and Memory: High-performance processor and memory for fast data calculation and processing

2.‌Specifications‌:

  • Compatible with ControlLogix processors from Rockwell Automation1
  • Uses proprietary backplane technology for robust data exchange1
  • Supports up to 125 slave devices via PROFIBUS network12
  • Maximum 1536 input and 1536 output data bytes per cycle1

3.‌Dimensions & Weight‌:

  • Dimensions: 320mm x 240mm x 150mm34
  • Weight: Approximately 1.2kg34

MVI69-PDPS

¥5,418.00

–‌Series‌: ProSoft MVI69 Series

–‌Parameters‌:

  • Communication Protocol: PROFIBUS DP, DP-v11
  • Data Transmission Rates: Supports standard communication rates up to 12MBit/s23
  • Power Supply: Typically 24V DC4, but also supports DC9-36V wide range with redundancy3

–‌Specifications‌:

  • Configurable data mapping and DP port operations2
  • Supports CompactLogix and MicroLogix 1500 LRP controllers (excluding certain models)2
  • Advanced fault diagnosis and monitoring capabilities2
  • IP30 protection rating with rugged aluminum housing3

AI03

¥4,158.00

1.‌Parameters‌:

  • Keyswitch Compatibility: MX, Alps, Choc, etc. (depending on design)
  • Layout: Customizable (TKL, 60%, 65%, etc.)

2.‌Specifications‌:

  • Material: Aluminum or plastic case, brass or steel plate
  • PCB: Hot-swappable or soldered

3.‌Dimensions & Weight‌:

  • Length: Varies depending on layout (e.g., 300mm for TKL)
  • Width: Varies depending on layout (e.g., 135mm for TKL)
  • Height: Around 30-40mm
  • Weight: 1-1.5kg (approximate)

4.‌Series‌:

  • Custom mechanical keyboard series designed by AI03 or a collaborative project