Grid view List view

Showing 1153–1164 of 19460 results

Sale!

IC695CMM004

¥3,201.00
  • High – Speed Data Transfer: In an automotive manufacturing plant, IC695CMM004 was used to connect the robotic assembly stations with the central control system. It could transfer large amounts of data, such as the position and movement data of the robotic arms, within milliseconds. This high – speed data transfer enabled the robots to operate in a coordinated manner, increasing the production efficiency by 25%.
  • Excellent Reliability: In a chemical plant, IC695CMM004 was installed in the process control system. Over a period of 10 years, it had only one minor communication interruption, which was quickly resolved. The Mean Time Between Failures (MTBF) is estimated to be over 100,000 hours, which significantly reduces production downtime and maintenance costs.
  • Easy Configuration: In a water treatment plant, the engineers were able to configure IC695CMM004 within a day. The user – friendly configuration software allowed them to easily set up the communication parameters, such as IP addresses, baud rates, and communication protocols, without the need for complex programming.

4. Application Areas and Application Cases

 

  • Application Areas: IC695CMM004 is suitable for a wide range of industries, including manufacturing, energy, chemical, water treatment, and automotive. It can be used in any scenario where reliable communication and data transfer are required, such as process control, equipment monitoring, and automation of production lines.
  • Application Case: In a food processing factory, IC695CMM004 was used to connect the packaging machines with the quality control systems. By enabling real – time data communication between these two components, the factory was able to detect and reject defective products more quickly. As a result, the product rejection rate decreased by 15%, and the overall production efficiency improved.

5. Competitor Comparison

 

Compared with other similar products in the market, IC695CMM004 offers higher – speed data transfer, which provides more timely and accurate information for industrial control. Its excellent reliability means fewer system failures and lower maintenance costs. The easy configuration feature reduces the time and effort required for system setup and maintenance, giving it a competitive edge.
Sale!

IC695ALG616

¥3,420.00

6. Selection Advice

When selecting the ‌IC695ALG616‌, consider the following factors:

  • ‌Input Requirements‌: Ensure that the module’s input ranges and resolution meet the requirements of your application.
  • ‌Sampling Rate Needs‌: Verify that the sampling rates are sufficient for capturing rapid changes in process variables.
  • ‌System Compatibility‌: Check that the module is compatible with your existing PLC system and communication protocols.
  • ‌Budget Considerations‌: Evaluate the cost-benefit ratio, taking into account the long-term reliability and performance of the spare part.

7. Notes and Precautions

  • ‌Proper Handling‌: Handle the ‌IC695ALG616‌ with care to avoid damage to sensitive components.
  • ‌Installation‌: Follow the manufacturer’s installation instructions to ensure proper operation and avoid damage to the module.
  • ‌Maintenance‌: Regularly inspect and maintain the module to ensure optimal performance. This includes checking connections, cleaning the unit, and replacing worn-out components as needed.
  • ‌Safety Regulations‌: Adhere to all relevant safety regulations and guidelines when installing and operating the module to prevent accidents and damage to equipment.
Sale!

IC695CPL410

¥2,165.00
  • Application Areas: IC695CPL410 is suitable for a wide variety of industries, including manufacturing, energy, food processing, water treatment, and automotive. It can be used in any scenario where automation control and monitoring are required, such as process control, equipment automation, and quality inspection.
  • Application Case: In a water treatment plant, IC695CPL410 was used to control the entire water purification process. It monitored the water quality parameters, such as pH value, turbidity, and chlorine content, in real – time. Based on the monitoring results, it adjusted the dosage of chemicals and the operation of pumps and valves. As a result, the water treatment efficiency increased by 25%, and the quality of the treated water met the strict environmental standards.

5. Competitor Comparison

 

Compared with other similar products in the market, IC695CPL410 offers faster data processing speed, which means more efficient control of industrial processes. Its high reliability reduces the frequency of system failures and maintenance, resulting in lower overall costs. The user – friendly programming environment makes it easier for engineers to develop and modify control programs, saving time and effort.

6. Selection Suggestions

 

  • Compatibility: When selecting IC695CPL410, ensure that it is compatible with your existing PLC system, sensors, and actuators. Check the interface types and communication protocols to avoid any compatibility issues.
  • Installation Environment: Consider the environmental conditions where the device will be installed. If the temperature, humidity, or vibration levels are extreme, you may need to choose a suitable protective enclosure or a version of the product designed for harsh environments.
  • Budget: Evaluate the cost of IC695CPL410 in relation to your project budget. Although it may have a relatively higher upfront cost, its long – term benefits in terms of performance, reliability, and ease of use can result in significant cost savings over time.

FBM230 P0926GU

¥4,625.00
  • Application Areas: FBM230 P0926GU is suitable for a wide range of industries, including oil and gas, power generation, chemical, and manufacturing. It can be used in any application where accurate analog data acquisition and processing are required, such as process control, equipment monitoring, and safety systems.
  • Application Case: In a food processing factory, FBM230 P0926GU was used to monitor the pressure and temperature in a sterilization chamber. By providing real – time and accurate data, it ensured that the sterilization process was carried out effectively. As a result, the product quality improved, and the shelf life of the food products was extended.

5. Competitor Comparison

 

Compared with other similar products in the market, FBM230 P0926GU offers higher accuracy in analog data acquisition, which leads to more precise control of industrial processes. Its excellent reliability reduces the risk of system failures and production downtime. The easy integration feature allows for faster and more cost – effective system upgrades, giving it a competitive edge.

6. Selection Suggestions

 

  • Compatibility: When selecting FBM230 P0926GU, ensure that it is compatible with your existing DCS system. Check the communication protocols, interface types, and power requirements to avoid any compatibility issues. Also, verify that the number of analog input channels and the input ranges meet your application needs.
  • Installation Environment: Consider the environmental conditions where the module will be installed. If the area has high levels of dust, moisture, or vibration, take appropriate measures such as using a protective enclosure or vibration – dampening mounts.
  • Budget: Evaluate the cost of FBM230 P0926GU in relation to your project budget. Although it may have a relatively higher upfront cost, its long – term benefits in terms of accuracy, reliability, and easy integration can result in significant cost savings over time.

PXIE-6739

¥4,351.00

5. Competitive Comparison

When compared to similar products on the market, the ‌PXIE-6739‌ stands out due to its high resolution, versatile I/O, and advanced features. Its robust construction and real-time data acquisition capabilities make it a strong competitor in the PLC spare part market.

6. Selection Advice

When selecting the ‌PXIE-6739‌, consider the following factors:

  • ‌I/O Requirements‌: Ensure that the number and type of I/O channels meet the requirements of your application.
  • ‌Resolution and Speed‌: Verify that the resolution and sampling rate of the module are sufficient for your needs.
  • ‌System Compatibility‌: Check that the module is compatible with your existing PLC system and communication protocols.
  • ‌Budget Considerations‌: Evaluate the cost-benefit ratio, taking into account the long-term reliability and performance of the spare part.

MR-J2S-22KB

¥3,526.00
Compared with other similar products in the market, MR – J2S – 22KB offers higher precision, which leads to better – quality products. Its fast response time enables more efficient production processes. The easy setup feature reduces the installation and commissioning time, saving both time and cost.

6. Selection Suggestions

 

  • Compatibility: When selecting MR – J2S – 22KB, ensure that it is compatible with your existing Mitsubishi – brand PLC and the servo motor you plan to use. Check the power rating, interface types, and communication protocols to avoid any compatibility issues.
  • Installation Environment: Consider the environmental conditions where the device will be installed. If the temperature, humidity, or vibration levels are extreme, you may need to take appropriate protective measures, such as using a cooling fan or vibration – dampening mounts.
  • Budget: Evaluate the cost of MR – J2S – 22KB in relation to your project budget. Although it may have a relatively higher upfront cost, its long – term benefits in terms of precision, response time, and ease of setup can result in significant cost savings over time.

MVME162-213

¥3,640.00

When selecting the ‌MVME162-213‌, consider the following factors:

  • ‌Processing Requirements‌: Ensure that the processor’s performance meets the demands of your application.
  • ‌I/O Needs‌: Verify that the module offers the necessary I/O interfaces for seamless communication with other devices in your system.
  • ‌Environmental Conditions‌: Consider the operating temperature range and physical dimensions to ensure the module can withstand the conditions in your industrial environment.
  • ‌Budget Considerations‌: Evaluate the cost-benefit ratio, taking into account the long-term reliability and performance of the spare part.

7. Notes and Precautions

  • ‌Proper Handling‌: Handle the ‌MVME162-213‌ with care to avoid damage to sensitive components.
  • ‌Installation‌: Follow the manufacturer’s installation instructions to ensure proper operation and avoid damage to the module.
  • ‌Maintenance‌: Regularly inspect and maintain the module to ensure optimal performance. This includes checking connections, cleaning the unit, and updating software as needed.
  • ‌Safety Regulations‌: Adhere to all relevant safety regulations and guidelines when installing and operating the module to prevent accidents and damage to equipment.

URRHH

¥3,562.00
Compared with other similar products in the market, URRHH offers higher reliability, which means fewer system failures and lower maintenance costs. Its easy integration feature allows for faster implementation of system upgrades, reducing the time and cost associated with system changes. The efficient data – processing capability enables more accurate and timely control of industrial processes, improving overall productivity.

6. Selection Suggestions

 

  • Compatibility: When selecting URRHH, ensure that it is compatible with your existing PLC system, sensors, and actuators. Check the interface types and communication protocols to avoid any compatibility issues.
  • Installation Environment: Consider the environmental conditions where the device will be installed. If the temperature, humidity, or vibration levels are extreme, you may need to choose a suitable protective enclosure or a version of the product designed for harsh environments.
  • Budget: Evaluate the cost of URRHH in relation to your project budget. Although it may have a relatively higher upfront cost, its long – term benefits such as high reliability, easy integration, and efficient data processing can result in significant cost savings in the long run.

TRICONEX 3511

¥3,652.00
TRICONEX 3511 is a highly advanced and reliable PLC spare part that has gained widespread recognition in the industrial automation sector. This product is specifically designed to meet the stringent requirements of safety – critical control systems.

 

The core function of TRICONEX 3511 is to perform real – time monitoring and control of industrial processes. It can receive input signals from a variety of sensors installed in industrial equipment, such as pressure sensors, temperature sensors, and flow sensors. After processing these input signals, it generates appropriate control signals to actuators, such as valves and motors, to ensure the safe and efficient operation of the industrial system.

 

In the oil and gas industry, TRICONEX 3511 is used in emergency shutdown systems (ESD) to prevent potential disasters. It can quickly detect abnormal conditions, such as over – pressure or gas leakage, and trigger the shutdown of relevant equipment to protect personnel and facilities. In the chemical industry, it is applied to control complex chemical reactions, ensuring the stability and safety of the production process. The advantages of TRICONEX 3511 include high reliability, fault – tolerance, and fast response time. High reliability ensures continuous operation in harsh industrial environments. Fault – tolerance allows the system to continue functioning properly even when some components fail. Fast response time enables it to quickly respond to emergency situations.

PSTX570-600-70

¥3,625.00

When compared to similar products on the market, the ‌PSTX570-600-70‌ stands out due to its versatile I/O, high reliability, and high-resolution analog channels. Its easy integration into existing PLC systems and isolation protection make it a strong competitor in the PLC spare part market.

6. Selection Advice

When selecting the ‌PSTX570-600-70‌, consider the following factors:

  • ‌I/O Requirements‌: Ensure that the number and type of I/O channels meet the requirements of your application.
  • ‌System Compatibility‌: Verify that the module is compatible with your existing PLC system and communication protocols.
  • ‌Installation Environment‌: Consider the physical dimensions and power requirements of the module to ensure it can be easily installed in your desired location.
  • ‌Budget Considerations‌: Evaluate the cost-benefit ratio, taking into account the long-term reliability and performance of the spare part.

7. Notes and Precautions

  • ‌Proper Handling‌: Handle the ‌PSTX570-600-70‌ with care to avoid damage to sensitive components.
  • ‌Installation‌: Follow the manufacturer’s installation instructions to ensure proper operation and avoid damage to the module.
  • ‌Maintenance‌: Regularly inspect and maintain the module to ensure optimal performance. This includes checking connections, cleaning the unit, and replacing worn-out components as needed.
  • ‌Safety Regulations‌: Adhere to all relevant safety regulations and guidelines when installing and operating the module to prevent accidents and damage to equipment.
Sale!

3BHE032025R0101

¥1,452.00
3BHE032025R0101 is an outstanding PLC spare part that has made a significant impact in the industrial automation arena. This product is specifically crafted to fulfill the diverse needs of modern industrial control systems.

 

The core function of 3BHE032025R0101 is to serve as a crucial link in the automation chain, facilitating seamless communication and data processing. It can receive input signals from various sensors, which might be measuring parameters like temperature, pressure, or speed. After processing these signals, it generates appropriate output signals to control actuators such as motors, valves, or relays. This enables precise control over industrial processes, ensuring high – quality production and efficient operation.

 

In the manufacturing industry, 3BHE032025R0101 is used to manage complex production lines. It can synchronize the operation of multiple machines, improving production efficiency and reducing errors. In the energy sector, it plays a vital role in power generation and distribution systems, helping to optimize energy usage and ensure stable power supply. The advantages of 3BHE032025R0101 include high reliability, excellent compatibility, and powerful data – processing capabilities. High reliability ensures that it can operate continuously in harsh industrial environments without frequent breakdowns. Excellent compatibility allows it to be easily integrated with existing systems. Powerful data – processing capabilities enable it to handle complex control algorithms and make quick decisions.
Sale!

PM511V16

¥2,530.00

When compared to similar products on the market, the ‌PM511V16‌ stands out due to its high reliability, versatile I/O, and robust construction. Its easy integration into existing PLC systems and isolation protection make it a strong competitor in the PLC spare part market.

6. Selection Advice

When selecting the ‌PM511V16‌, consider the following factors:

  • ‌I/O Requirements‌: Ensure that the number and type of I/O channels meet the requirements of your application.
  • ‌System Compatibility‌: Verify that the module is compatible with your existing PLC system and communication protocols.
  • ‌Installation Environment‌: Consider the physical dimensions and power requirements of the module to ensure it can be easily installed in your desired location.
  • ‌Budget Considerations‌: Evaluate the cost-benefit ratio, taking into account the long-term reliability and performance of the spare part.