Grid view List view

Showing 11593–11604 of 14780 results

Bently 3500/53

¥5,490.00
Bently Nevada 3500/53 is a highly reliable and advanced electronic overspeed detection system designed for industrial applications. Here is a breakdown of its parameters, specifications, dimensions, weight, series, features, and functions in English:
Parameters and Specifications:
Input Signals: Each overspeed detection module accepts signals from either a vortex sensor or a magnetic sensor. The input signal range is +10.0V to -24.0V, and signals超出this range are limited within the module.
Compatible Sensors: The system is compatible with various sensors, including Bently Nevada 3300 8mm vortex sensors, 3300 16mm high-temperature vortex sensors, 7200 5mm, 8mm, 11mm, and 14mm vortex sensors, 3300 RAM vortex sensors, and magnetic sensors.
Power Requirements: The system requires a 24VDC working voltage.
Alarm Settings: It allows users to set both under-speed and over-speed alarm levels, as well as critical (overspeed) settings. All alarm settings are configurable through software.
Communication Interface: It supports RS-485 communication with a communication rate of up to 9600bps.
Dimensions and Weight:
Dimensions: The approximate dimensions of the module are 120mm x 80mm x 40mm.
Weight: It typically weighs around 0.5kg.
Series:
The Bently Nevada 3500/53 belongs to the 3500 series of monitoring and protection systems, which are renowned for their reliability and performance in industrial applications.

Bently 3500/50

¥7,426.00
Bently 3500/50 Parameters, Specifications, Dimensions, Weight, Series, Features, and Functions (English)
Parameters and Specifications:
Channels: It typically features multiple input channels, allowing for simultaneous monitoring of multiple parameters.
Input Voltage Range: The module accepts a wide range of input voltages, compatible with global power standards.
Frequency: It operates within a standard frequency range.
Power Consumption: Maximum power consumption is typically specified.
Operating Temperature Range: The module is designed to operate within a specified temperature range, suitable for various industrial environments.
Dimensions and Weight:
Dimensions: The exact dimensions of the Bently 3500/50 module may vary depending on the specific model and any accessories attached. However, it is typically designed to fit within standard rackmount spaces.
Weight: The weight of the module is typically lightweight, making it easy to install and maintain. However, the exact weight may vary depending on the specific configuration.
Series:
The Bently 3500/50 belongs to the Bently Nevada 3500 series of monitoring and protection systems for industrial applications.

Bently 3500/46M

¥5,419.00
Bently Nevada 3500/46M is a highly specialized monitoring module designed for industrial applications, particularly for the monitoring and protection of rotating machinery. Here is a breakdown of its parameters, specifications, dimensions, weight, series, features, and functions in English:
Parameters and Specifications:
Input Channels: It is a four-channel monitor that accepts inputs from various sensors, including displacement sensors and 3500 stator-mounted air gap sensors (SMAG).
Signal Processing: The module processes the input signals to obtain vibration and displacement information, comparing it with user-programmable alarm settings.
Sampling Rate and Resolution: It offers a sampling rate of 102.4 kSPS and a resolution of 24 bits.
Sensor Compatibility: Compatible with sensors such as accelerometers, velocity sensors, displacement sensors, and temperature sensors.
Temperature Range: Operates within a temperature range of -50°C to 100°C.
Dimensions and Weight:
Dimensions: The approximate dimensions of the module are 3.9 x 16.8 x 22.1 cm (length x width x height).
Weight: It typically weighs around 0.5 kg, but please note that this may vary slightly based on the specific configuration and accessories.
Series:
The Bently Nevada 3500/46M belongs to the 3500 series of products, which is renowned for its advanced vibration monitoring and protection systems.

Bently 3500/45

¥4,529.00
Bently 3500/45 Parameters, Specifications, Dimensions, Weight, Series, Features, and Functions (English)
Parameters and Specifications:
Inputs: Accepts inputs from a range of sensors including proximity sensors, rotating position transducers (RPT), DC linear variable differential transformers (LVDT), AC LVDT, and rotating potentiometers.
Signal Processing: The module conditions the input signals and compares them with user-programmable alarm set points.
Communication: Supports communication interfaces for data exchange and integration with other systems.
Dimensions and Weight:
Dimensions: The overall size is approximately 127x127x76 mm (5x5x3 inches), with some variations possible depending on the model and accessories.
Weight: Typically, the weight is around 2KG, but please note that this may vary slightly based on the specific configuration.
Series:
The Bently Nevada 3500/45 belongs to the Bently Nevada 3500 series of vibration monitoring and protection systems.

Bently 3500/42M

¥5,416.00
Bently Nevada 3500/42M is a sophisticated monitoring module designed for industrial applications, specifically for vibration monitoring and analysis. Here is a breakdown of its parameters, specifications, dimensions, weight, series, features, and functions in English:
Parameters and Specifications:
Measurement Range: Typically, it offers a vibration measurement range of 0-5 g with a resolution of 0.01 g.
Sampling Rate: The module has a sampling frequency of 10 kHz, enabling high-speed data acquisition.
Signal Output: BNC interface for analog signal output.
Power Supply: The module can be powered through connection to a data acquisition system or an external battery.
Dimensions and Weight:
Dimensions: The module measures approximately 97mm x 45mm x 24mm (length x width x height).
Weight: It has a weight of approximately 0.91kg (2.0lbs.).
Series:
The Bently Nevada 3500/42M belongs to the 3500 series of products for industrial monitoring and automation.

Bently 3500/40M

¥5,421.00
The Bently Nevada 3500/40M is a sophisticated four-channel monitor specifically designed for industrial automation and vibration monitoring applications. Here is a breakdown of its parameters, specifications, dimensions, weight, series, features, and functions in English:
Parameters and Specifications:
Channels: It is a four-channel monitor that accepts inputs from Bently Nevada’s proximity sensors.
Signal Processing: The monitor conditions the signals to provide various vibration and position measurements.
Alarm Comparison: The adjusted signals are then compared with user-programmable alarms.
Programming Capability: Using the 3500 rack configuration software, users can program each channel of the 3500/40M to perform specific functions such as radial vibration, thrust position, differential expansion, eccentricity, and Rebam.
Dimensions and Weight:
Dimensions: The specific dimensions may vary slightly depending on the model or variant, but it is generally compact and suitable for industrial installation.
Weight: The weight is approximately 2KG.
Series:
The Bently Nevada 3500/40M belongs to the 3500 series of vibration monitoring and industrial automation products.

Bently 3500/34

¥2,650.00
The Bently Nevada 3500/34 is a sophisticated module designed for industrial automation and mechanical condition monitoring. Here is a breakdown of its parameters, specifications, dimensions, weight, series, features, and functions in English:
Parameters and Specifications:
Power Supply: 24 V DC.
Rated Current: 5A.
Contact Capacity: 30 A.
Response Time: Less than 25 ms.
Protection Rating: IP65.
Dimensions and Weight:
Dimensions: 140 mm x 70 mm x 35 mm (5.5 inches x 2.8 inches x 1.4 inches).
Weight: Actual weight may vary depending on the specific configuration and accessories, but generally, it should be within a reasonable range for an industrial monitoring module.
Series:
The Bently Nevada 3500/34 belongs to the 3500 series of industrial automation and condition monitoring products.

Bently 3500/33

¥4,185.00
Bently Nevada 3500/33 is a 16-channel relay module designed for industrial monitoring and control systems. Here is a breakdown of its parameters, specifications, dimensions, weight, series, features, and functions in English:
Parameters and Specifications:
Input Channels: The module provides 16 relay outputs.
Relay Type: Single Pole Double Throw (SPDT) relay.
Relay Contacts: Sealed with epoxy resin.
Relay Contact Life: 10,000 cycles.
Arc Suppression: 250 Vrms as standard installation.
Programming: Alarm drive logic can be programmed using AND and OR logic.
Compatibility:
Requires 3500 Rack Config version 3.3 or higher.
Needs data acquisition software version 2.40 or higher.
Requires 3500 data display software version 1.40 or higher.
Dimensions and Weight:
Dimensions: The module has a full-height front slot and measures approximately 220mm x 170mm x 85mm.
Weight: Approximately 5kg.

Bently 3500/32

¥3,562.00
The Bently Nevada 3500/32 is a sophisticated module designed for industrial automation and mechanical condition monitoring. Here is a breakdown of its parameters, specifications, dimensions, weight, series, features, and functions in English:
Parameters and Specifications:
Conversion Type: The module features an input for Sigma-Delta conversion.
Input Filtering: It provides programmable notch filters with multiple frequencies.
Common-Mode Rejection Ratio (CMRR): Selection of 10HZ or 50HZ filter offers a CMRR of 85dB at 50HZ, while 10HZ or 60HZ filter provides a CMRR of 85dB at 60HZ.
Nonlinearity and Repeatability: ±0.03% for both nonlinearity and repeatability.
Diagnostics: It provides bit-wise reporting for upper and lower limit exceedances, as well as open circuit detection.
Dimensions and Weight:
Dimensions: The module measures 138mm x 36mm x 145mm.
Weight: It weighs approximately 1.39kg (3.06lbs.).
Series:
The Bently Nevada 3500/32 belongs to the 3500 series of industrial automation and condition monitoring products.

Bently 3500/25

¥3,592.00
The Bently Nevada 3500/25 is an advanced keyphasor module widely used in industrial automation and machinery monitoring applications. Here is a summary of its key parameters, specifications, dimensions, weight, series, features, and functions in English:
Parameters and Specifications:
Input Voltage Range: Typically ranges from 18 VDC to 60 VDC.
Input Current: Ranges from 1 mA to 32 mA.
Output Voltage Range: Ranges from 1 VDC to 24 VDC.
Output Current: Maximum of 100 mA.
Accuracy: ±0.5% of full scale.
Linearity: ±0.25% of full scale.
Response Time: Less than or equal to 500 microseconds.
Operating Temperature Range: From -40°C to +85°C.
Dimensions and Weight:
Dimensions: The exact dimensions may vary based on the specific model and configuration. However, it’s generally a semi-high, dual-channel module suitable for rack-mounting.
Weight: The weight of the module is not specifically mentioned, but it’s generally lightweight and suitable for industrial applications.

Bently 3500/22M

¥4,269.00
The Bently Nevada 3500/22M is a module with specific parameters, specifications, dimensions, weights, series information, features, and applications. Here’s a summary of these aspects in English:
Parameters and Specifications:
Input Signals: The module supports a wide range of input signals, including analog signals such as 4-20mA, 0-5V, and 0-10V, as well as digital signals like Modbus and Profibus.
Output Signals: Similarly, it provides output signals in analog formats like 4-20mA, 0-5V, and 0-10V, as well as relay outputs (dry contacts).
Power Supply: The module operates on a power range of 100-240V AC, with a maximum power consumption of 25W.
Dimensions and Weight:
Dimensions: The module’s typical dimensions are 175mm x 115mm x 35mm. However, there is also a variant with dimensions of 138mm x 138mm x 25mm.
Weight: Depending on the source, the weight can vary. Some specifications indicate a weight of 0.5kg, while others mention 1.2kg.
Series:
The Bently Nevada 3500/22M belongs to the 3500 series of industrial automation and condition monitoring products.

Bently 3500/20

¥5,426.00
Bently Nevada 3500/20 Parameters, Specifications, Dimensions, Weight, Series, Features, and Functions
Parameters and Specifications:
Type: PLC (Programmable Logic Controller).
Power Consumption: Typical value of 4.75 watts.
Maximum Current: Less than 1mA dc (dry contact to common).
Cable Length: Supports cables with a maximum length of 30 meters (100 feet).
Dimensions and Weight:
Dimensions: Height – 9.5 inches, Width – 0.96 inches, Depth – 9.52 inches.
Weight: Approximately 0.91 kilograms.
Series:
The Bently Nevada 3500 series, which includes the 3500/20 module, is a comprehensive range of products for mechanical condition monitoring.