GE IS200IGDMH1BBB is a key module in the automation control system. The following is specific information about its parameters, specifications, dimensions, weight, series, characteristics and functions:
Parameters:
Operating voltage: The range is 220v~380v, which enables it to adapt to the voltage requirements of various industrial application scenarios.
Rated power: Up to 1.5A at USB full load 0.5A.
Clock accuracy: The maximum shift per day is 2 seconds.
Specifications:
Execution speed: 0.072 ms per 1000 Boolean instructions.
Number of blocks: A maximum of 512 blocks are supported.
Size and weight:
Size: The exact size may vary depending on the product version and specific configuration, but there is a version of 100mm * 260mm.
The GE IS200DVIBH1B is an intelligent electrical sensor with a wide range of application scenarios. The following is specific information about its parameters, specifications, dimensions, weight, series, characteristics and functions:
Parameters and specifications:
Measurement range: A wide range of current measurements, capable of measuring currents from a few milliamps to thousands of amps. The voltage measurement range also covers both low and high voltage systems. In addition, it can also measure parameters such as active power, reactive power, total power and electrical energy.
Communication interface: supports a variety of communication protocols, such as Modbus, Profinet, etc., allowing the sensor to exchange data with the host computer, PLC or other intelligent devices.
Size and weight:
Size: Specific size parameters may vary from source to source or product version. Some sources indicate that its specification size is 302022mm, while others mention that its size is 110*210mm.
Series:
Series: GE IS200DVIBH1B belongs to the GE IS200 series intelligent sensor.
The ABB PFTL101B 2.0KN is a high-precision tension sensor or controller manufactured by ABB for a wide range of applications. The following is a specific description of its parameters, specifications, dimensions, weight, series, characteristics and functions:
Parameters and specifications:
Input and output: The equipment uses three-phase four-wire system or three-phase three-wire system of power grid input, output can be three-phase four-wire system or three-phase three-wire system. Three ammeters indicate the output current of each phase, while a transfer switch and a voltmeter are used to shift the output line voltage of each phase.
Voltage and frequency: The output voltage is 220V±3% or 110V±3%, and the frequency range is 50HZ/60HZ. The adjustment time is less than 1 second (when the input voltage changes by 10%).
Efficiency: The efficiency of the device is greater than 90%.
Size and weight:
Specification size: Its specification size is PFTL101B 2.0KN 3BSE004185R1mm.
Weight: According to some sources, it weighs about 20kg.
Series:
Series: The device belongs to the PFTL101B series.
METSO IOP114 is an automation control module, the following is specific information about its parameters, specifications, dimensions, weight, series, characteristics and role:
Parameters and specifications:
Input voltage: 220VAC.
Output voltage: 24VDC.
Maximum output current: up to 5A.
Operating temperature range: -20℃ to +50℃.
Protection rating: IP67, which means it has some dust and water resistance.
Size and weight:
Size: According to some data, its size is 100mm x 80mm x 40mm; Other sources indicate a size of 24mm x 58mm x 65mm. The exact size may vary depending on the product version or market availability, it is recommended to refer to the official documentation or contact the supplier for accurate information.
ABB LXN1604-6 3BHL000986P7000 is a power module designed for industrial automation control. The following is specific information about its parameters, specifications, dimensions, weight, series, characteristics and functions:
Parameters and specifications:
Input type: Support 1-Phase/Single Phase, input voltage range of 85 VAC to 264 VAC, 90 VDC to 350 VDC, with a wide voltage input range, can adapt to different power environment.
Output power and voltage: The output power is 500 W with two output channels, channel 1 has an output voltage range of 24.7 VDC and an output current range of 20 A.
Accuracy level: The accuracy level of current and voltage is 0.2.
Size and weight:
Dimensions: Length 194 mm, width 113.6 mm, height 138 mm.
ABB PFEA112-65 3BSE050091R65 is a powerful processor module that is mainly used in industrial automation and control systems. The following is specific information about its parameters, specifications, dimensions, weight, series, characteristics and functions:
Parameters and specifications:
Processor: This module is a 16-bit processor module.
Memory: It has 64 KB of user program memory and 32 KB of data memory.
Input and output: The module has 16 digital inputs, 16 digital outputs, and 8 analog inputs.
Power supply: Its power supply is 24 V AC/DC.
Size and weight:
Dimensions: The module measures 90 x 110 x 60 mm.
Weight: It weighs 1.2 kg.
Series:
Series: It belongs to ABB 800xA Control system and ABB Control AC 800M series PLC modules.
The GE IC695CRU320 is a redundant processor specifically designed for use in the PACSystems RX3i product family. It is manufactured by GE Fanuc/Emerson Automation and is designed to improve system availability and reliability. The following are the detailed parameters, specifications, size, weight, series, features and functions of the processor:
Parameters and specifications:
Processor: It’s equipped with a 1Ghz Celeron M processor with 64MB of RAM.
Communication interface: Supports two serial communication ports, including RS232 and RS485 communication standards. In addition, there are Ethernet ports and USB ports.
Battery backup: Up to 64MB of battery backup RAM is supported, ensuring data security and integrity in the event of a power failure.
Size and weight:
Weight: Depending on the data, its weight may be around 1.26KG or close to 0.9kg.
Dimensions: Its overall dimensions are 71mm x 138mm x 131mm.
Regarding the parameters, specifications, dimensions, weight, series, features and functions of the GE IS200VSVOH1B module, the following answers are given based on the available information:
Parameters and specifications:
Type: IS200VSVOH1B is a power module or servo control board. The type and application scenario may vary according to the configuration and use.
Channels and outputs: With multiple channels and discrete output channels, the voltage and current of each channel can be independently controlled.
Programming configuration: With the characteristics of programmable configuration, convenient for users to carry out flexible control and application according to actual needs.
The following is detailed information about the parameters, specifications, dimensions, weight, series, features and functions of the GE DS200DDTBG2ABB module:
The parameters, specifications, dimensions, weight, series, features and functions of GE DS200UPSAG1AGD module can be summarized as follows:
Parameters:
Input type: The module can monitor up to 12 RTD (Resistance Temperature Detector) inputs for stator, bearing, environmental or other temperature monitoring.
RTD Type: Each RTD type can be field-programmed to be 100Ω platinum (DIN 43760), 100Ω nickel, 120Ω nickel or 10Ω copper.
Specifications:
RTD circuit compensation: When using a three-wire RTD, the module automatically compensates the wire resistance.
Lead resistance: The lead resistance should not exceed 25Ω (platinum/nickel type RTD) or 3Ω (copper type RTD) per lead.
Series:
Series: The module is part of GE’s DS200 series, an important family of GE’s industrial automation products.
