Grid view List view

Showing 10189–10200 of 19460 results

IS215UCVEM06A

¥5,206.00
Product Parameters and Specifications:
Model Type: This likely refers to the specific type of industrial sensor, actuator, or control module.
Voltage and Current Ratings: The electrical ratings indicate the safe operating limits for voltage and current.
Operating Temperature Range: The range of temperatures within which the product can operate safely.
Signal Output: The type and range of the electrical signal output from the product, such as analog voltage or digital pulses.
Sensor or Actuator Type: If the product is a sensor or actuator, the type of sensing or actuation mechanism (e.g., temperature, pressure, flow, position, etc.).
Communications Interface: If applicable, the type of communication protocol or interface (e.g., Ethernet, RS-485, wireless, etc.) used for data transmission.
Power Consumption: The amount of power consumed by the product during operation.

ST2600GXH25A

¥4,685.00
Capacity: The total storage capacity of the HDD, usually measured in gigabytes (GB) or terabytes (TB).
Interface: The type of connection interface used by the HDD, such as SATA, SAS, or NVMe.
Form Factor: The physical dimensions of the HDD, such as 2.5″ or 3.5″.
Rotational Speed: The speed at which the HDD’s platters rotate, typically measured in rotations per minute (RPM).
Cache Size: The amount of memory used to temporarily store frequently accessed data, improving performance.
Average Access Time: The average time it takes for the HDD to locate and start reading or writing data.
MTBF (Mean Time Between Failures): An estimate of the average time between failures of the HDD.
Power Consumption: The amount of power the HDD consumes during operation and idle states.

WOODWARD 9907-167

¥4,689.00
WOODWARD 9907-167 appears to be a product number related to Woodward Governor Company, which specializes in the design and manufacture of control systems for gas turbines, steam turbines, and compressors. However, without direct access to the latest product catalog or documentation, it’s challenging to provide precise specifications for a specific part number. Typically, product parameters and specifications for Woodward’s products would include technical details such as:
Type of Control System: Woodward produces a range of control systems, including mechanical, hydraulic, and electronic governors. The 9907-167 could refer to a specific type of control system.
Turbine or Compressor Compatibility: Each control system is designed for a specific turbine or compressor model. The parameters would indicate the compatibility of the 9907-167 with different turbine or compressor models.
Control Accuracy and Response Time: Details on how precisely the control system can regulate turbine or compressor speed and how quickly it responds to changes.
Operating Range: The range of speeds or loads that the control system can effectively manage.
Power and Signal Inputs/Outputs: Technical specifications on the power requirements, analog and digital signal inputs and outputs, and any communication interfaces.

5SHY4045L0004

¥5,268.00
ABB 5SHY4045L0004 is an electrical product, likely related to motors or drives. However, without access to the latest product catalog or documentation, it’s challenging to provide detailed specifications for a specific part number. Typically, product parameters and specifications would include technical details such as:
Rated Voltage and Current: The voltage and current ratings indicate the safe operating limits of the product.
Power Rating: The power rating specifies the maximum power that the product can handle without exceeding its thermal limits.
Control Features: Information on the control features, such as start-up, speed control, and braking capabilities.
Protection Class: Specifies the level of protection against electric shock and ingress of solid objects or water.
Insulation Class: Indicates the level of insulation provided by the product.
Dimensions and Mounting: Detailed dimensions, including any required mounting holes or spaces.
Environmental Ratings: Information on the temperature, humidity, and other environmental conditions for which the product is suitable.
Compliance and Certifications: References to any safety standards or industry certifications that the product meets.

5SHY3545L0020

¥5,068.00
ABB 5SHY3545L0020 is an electrical circuit breaker from the ABB range of low-voltage power distribution and motor control products. This circuit breaker is designed to protect electrical circuits from overload, short circuits, and other fault conditions. Here are the key product parameters, specifications, and application areas of the ABB 5SHY3545L0020:
Product Parameters:
Rated Current: The maximum continuous current that the circuit breaker can carry without tripping.
Short-Circuit Capacity: The maximum short-circuit current that the circuit breaker can withstand for a short duration.
Tripping Characteristics: The time-current characteristics that define how the circuit breaker trips (opens the circuit) in response to overloads or short circuits.
Mechanical Properties: The number of operations, mechanical endurance, and other relevant mechanical characteristics.
Safety Features: Features such as isolation, interlocking, and arc flash protection to enhance operator safety.

FCP270 P0917YZ

¥5,628.00
The FOXBORO FCP270 P0917YZ is a specific version or configuration of the FOXBORO FCP270 process controller. While the general parameters, specifications, and application areas of the FCP270 have been covered earlier, the P0917YZ suffix might indicate a particular software version, hardware configuration, or a custom option tailored to a specific application.
Product Parameters (Specific to FCP270 P0917YZ):
Software Version: The version of the control software running on the unit, which may include bug fixes, performance improvements, or new features.
Hardware Configuration: Specific components or modules installed in the controller, such as memory, communication cards, or expansion modules.
Custom Options: Any additional features or capabilities that are unique to this particular version of the FCP270, such as specialized algorithms, custom interfaces, or integration with specific equipment or systems.
Specifications (Specific to FCP270 P0917YZ):
Processor: The type and speed of the processor used in the controller, which affects its processing power and ability to handle complex control tasks.

FCP270

¥4,068.00
FOXBORO FCP270 Product Parameters, Specifications, and Application Areas
Product Parameters:
Control Type: Typically, the FCP270 is a process controller, designed to monitor and control industrial processes.
Input/Output Range: The range of process variables it can accept as inputs and control as outputs.
Control Accuracy: The degree of precision with which the controller maintains the desired process variable.
Control Modes: The different modes of control, such as proportional, integral, derivative (PID), or others, that the controller supports.
Communication Interfaces: The standards and protocols used for communication with other systems or devices.
Specifications:
Power Supply: The voltage and current required to power the controller.
Physical Dimensions: Length, width, and height of the controller.
Weight: Approximate weight of the unit.
Operating Environment: The range of temperatures, humidity, and other conditions the controller can operate under.
Display: Type of display, such as LCD or LED, and its resolution.

PM864A

¥4,685.00
ABB PM864A is a high-performance motor protection relay from ABB, a leading provider of electrical and automation solutions. This relay is designed to monitor and protect motors from various faults and conditions that may lead to damage or failure. Here are the key product parameters, specifications, and application areas of the ABB PM864A:
Product Parameters:
Monitoring Functions: It provides comprehensive motor protection by monitoring parameters such as current, voltage, power, frequency, and temperature.
Protection Types: Includes thermal protection, overcurrent protection, undervoltage protection, phase failure protection, and more.
Settings and Configuration: Easy to set up and configure using a user-friendly interface or software tools.
Diagnostic Capabilities: Provides detailed fault diagnosis and reporting to help identify and troubleshoot motor issues.
Communication Interfaces: Supports various communication protocols for remote monitoring and control.
Specifications:
Power Supply: Universal power supply for use in different voltage ranges.
Operating Temperature: Wide operating temperature range to suit various environments.
Dimensions and Weight: Compact size and lightweight design for easy installation and integration.
Certifications: Complies with various international safety and quality standards.

CC-PCNT01

¥4,625.00
HONEYWELL CC-PCNT01 Product Parameters, Specifications, and Application Areas
Product Parameters:
Sensor Type: Typically, this refers to the type of sensor, such as pressure or temperature, that the CC-PCNT01 is designed to measure.
Operating Range: The range of pressures or temperatures within which the sensor can operate effectively.
Accuracy: The degree of precision with which the sensor measures the target parameter.
Stability: The ability of the sensor to maintain its accuracy over time and under varying conditions.
Response Time: The time it takes for the sensor to respond to changes in the measured parameter.
Specifications:
Physical Dimensions: The length, width, and height of the sensor, which determines its space requirements.
Weight: The weight of the sensor, which is important for installation and portability.
Output Signal: The type of signal the sensor produces, such as analog or digital, and its range.
Power Requirements: The voltage and current needed to operate the sensor.
Environmental Ratings: Resistance to temperature, humidity, and other environmental factors that may affect sensor performance.

CC-PCNT02

¥4,695.00
HONEYWELL CC-PCNT02 Product Parameters, Specifications, and Application Areas
Product Parameters:
Sensor Type: Likely a pressure or temperature sensor based on the naming convention.
Operating Range: Specific range of pressure or temperature it can measure.
Accuracy: The degree of precision with which the sensor can measure the target parameter.
Response Time: Time taken by the sensor to respond to changes in the measured parameter.
Power Requirements: Voltage and current needed for operation.
Specifications:
Physical Dimensions: Length, width, and height of the sensor.
Weight: Approximate weight of the sensor.
Material: Material used in the construction of the sensor, often related to durability and resistance to certain environments.
Connector Type: Type of connector used for wiring, such as an M12 or a standard threaded connector.
Environmental Ratings: Resistance to temperature, humidity, vibration, and other environmental factors.

TGT- S00N-1-1-CA

¥5,369.00
GE TGT-S00N-1-1-CA
Product Parameters, Specifications, and Application Areas:
1. Product Parameters:
Manufacturer: GE (General Electric) – A global leader in various industries, including energy, healthcare, transportation, and aviation.
Model Number: TGT-S00N-1-1-CA – This specific model number likely represents a specific configuration or type of product within GE’s offering.
2. Product Specifications:
Size and Dimensions: Dimensions of the product, including its length, width, height, and weight.
Operating Conditions: Temperature, humidity, and other environmental factors within which the product can operate effectively.
Performance Characteristics: Output, efficiency, and other relevant performance metrics.
Material and Construction: The materials used in the product’s construction, affecting its durability, reliability, and resistance to corrosion or wear.
Electrical Requirements: Voltage, current, and other electrical parameters necessary for the product’s operation.

216VC62A

¥4,629.00
ABB 216VC62A is an industrial robot controller from ABB, a leading automation solutions provider. This controller is designed to offer high performance and reliable control for industrial robots, enabling them to execute complex tasks with precision and efficiency.
Here are the key product parameters, specifications, and application areas of the ABB 216VC62A:
Product Parameters:
Processor: High-performance processor for fast and efficient task execution
Memory: Adequate memory capacity to handle large programs and data
Inputs/Outputs: Multiple I/O interfaces for connectivity with sensors, actuators, and other devices
Power Supply: Robust and reliable power supply unit to ensure continuous operation
Operating System: Robust and optimized operating system for real-time control and monitoring