Power supply: Usually 12V~24V DC.
Signal: Support 4~20mA two-wire signal.
Measurement range: In terms of temperature measurement, its range is -30℃ ~ 70℃.
Accuracy: The accuracy of temperature measurement can reach ±0.2 ° C, and the accuracy can even reach 0.1 ° C at 25 ° C.
Weight: According to some sources, it weighs about 0.5kg, but please note that this may vary depending on the product version or configuration.
Number of channels: Provides six channels for temperature monitoring.
Input type: Accepts resistance temperature detector (RTD) and thermocouple (TC) temperature input.
Power consumption: 9 watts.
Operating temperature range: from minus 22 to 150 degrees Fahrenheit, which is minus 30 to 65 degrees Celsius.
Lead inputs: each greater than 10 megohm.
Weight: Approximately 1.2kg.
Communication rate: Supports a variety of communication rates, such as 9.6kBit/s, 19.2kBit/s, etc., to meet different communication requirements.
Power supply: Adopts dual power supply redundancy input, supports DC(9-36)V, typical value is DC24V, power consumption is less than 4W, and has DC1500V voltage isolation and reverse protection function.
Electrical interface: 4000V lightning protection, 1.5A overcurrent protection and 600W surge protection.
Dip switch: Supports manual setting of all standard rates or rate adaptive, and the rates of all electrical interfaces are the same.
Input voltage range: 18 VDC to 60 VDC.
Input current: 1 mA to 32 mA.
Output voltage range: 1 VDC to 24 VDC.
Output current: Max. 100 mA.
Accuracy: ±0.5% of full scale.
Linearity: ±0.25% of full scale.
Response time: ≤500μs.
Operating temperature range: -40°C to +85°C.
Weight: Approximately 0.8KG.
High reliability: A variety of technical means are used to ensure its high reliability operation in the industrial field, such as photoelectric isolation IO interface circuit, R_C filter, shielding measures.
Rich I/O interface modules: For different industrial field signals, such as AC or DC, switching or analog, there are corresponding IO modules connected with industrial field devices or equipment.
Processor: PowerPC processor and FPGA technology, the specific model may be Freescale PowerPC 7447A, the main frequency of 1.267GHz. Another claim is that it is equipped with a maximum of 1.26 GHz Pentium III processor.
Memory: 512MB DR2 SDRAM, while supporting up to 1GB DDR2 SDRAM and expandable up to 4GB.
Port: It has two Gigabit Ethernet ports, supporting RJ-45 and optical fiber ports. In addition, there are two RS-232 serial ports, two RS-422/485 serial ports, and four USB 2.0 ports.
Size: 6U, 160mm x 233mm. Another saying is that the size is 1200mm, which may refer to the size of the entire device, or the size of a different model or version.
Motherboard system information: The module is equipped with Intel(R) Atom D2550 Atom processor, the main frequency is 1.86GHz, and the second-level cache is 1MB. The system chip is Intel D2550+NM10, uses Award BIOS, and supports ACPI. It is also equipped with a Type II CF card slot as an electronic disc.
I/O interface: The IS200RAPAG1B supports MINI PCIE ports, SATA/IDE ports, and USB ports, and also provides a variety of interface options such as parallel ports and serial ports to meet different connection requirements.
GPIO port: Provides an 8-bit GPIO port with four inputs and four outputs.
Size: Its size is 100*260mm.
Weight: Approximately 0.13 kg.
Operating voltage: The range is 220v~380v, which enables it to adapt to the voltage requirements of various industrial application scenarios.
Rated power: Up to 1.5A at USB full load 0.5A.
Clock accuracy: The maximum shift per day is 2 seconds.
Execution speed: 0.072 ms per 1000 Boolean instructions.
Number of blocks: A maximum of 512 blocks are supported.
Size: The exact size may vary depending on the product version and specific configuration, but there is a version of 100mm * 260mm.
Weight: Approximately 2KG.
Measurement range: A wide range of current measurements, capable of measuring currents from a few milliamps to thousands of amps. The voltage measurement range also covers both low and high voltage systems. In addition, it can also measure parameters such as active power, reactive power, total power and electrical energy.
Communication interface: supports a variety of communication protocols, such as Modbus, Profinet, etc., allowing the sensor to exchange data with the host computer, PLC or other intelligent devices.
Size: Specific size parameters may vary from source to source or product version. Some sources indicate that its specification size is 302022mm, while others mention that its size is 110*210mm.
Input voltage: 220VAC.
Output voltage: 24VDC.
Maximum output current: up to 5A.
Operating temperature range: -20℃ to +50℃.
Protection rating: IP67, which means it has some dust and water resistance.
Size: According to some data, its size is 100mm x 80mm x 40mm; Other sources indicate a size of 24mm x 58mm x 65mm. The exact size may vary depending on the product version or market availability, it is recommended to refer to the official documentation or contact the supplier for accurate information.
Weight: 500g.
Input type: Support 1-Phase/Single Phase, input voltage range of 85 VAC to 264 VAC, 90 VDC to 350 VDC, with a wide voltage input range, can adapt to different power environment.
Output power and voltage: The output power is 500 W with two output channels, channel 1 has an output voltage range of 24.7 VDC and an output current range of 20 A.
Accuracy level: The accuracy level of current and voltage is 0.2.
Dimensions: Length 194 mm, width 113.6 mm, height 138 mm.
Weight: about 3 kg.
Processor: This module is a 16-bit processor module.
Memory: It has 64 KB of user program memory and 32 KB of data memory.
Input and output: The module has 16 digital inputs, 16 digital outputs, and 8 analog inputs.
Power supply: Its power supply is 24 V AC/DC.
Dimensions: The module measures 90 x 110 x 60 mm.
Weight: It weighs 1.2 kg.