Parameters and specifications
Processor type: 32-bit RISC processor.
Memory: According to the search results, there are two specifications, one is 128 MB memory, 4 GB flash memory; The other is 8 MB RAM and 64 MB Flash.
Communication interface: 2 Ethernet ports, 4 serial ports, 2 USB ports; The other specification is 1 Ethernet port and 2 serial ports.
Input/output: up to 2048 input/output points are supported; Another specification is up to 384 digital inputs/outputs and 64 analog inputs/outputs.
Power supply: 24VDC power input; It is also mentioned that the rated voltage is 230 volts AC voltage.
Operating temperature: Depending on the search results, there are different operating temperature ranges, such as -40 °C to 70 °C, 0°C to 60°C, or -20 °C to +60 °C
Size and weight
Dimensions: 4.4 inches x 12.4 inches x 10.3 inches
Parameters and specifications
Model name: CI854AK01 3BSE030220R1
Input voltage: 24VDC or 125VDC
Output voltage: 24VDC
Maximum output current: 10A
Operating temperature range: -40°C to 70°C
Sampling period: 100ms
Max I/O point: 384
Communication protocols: Modbus, Ethernet, OPC, etc
Size and weight
Size:
Depth/length: 274.5mm or 120mm x 60mm x 80mm (data may vary from source to source)
Height: 27 mm or 185mm
Width: 270 mm or 59 mm
Weight:
0.8 kg or 0.5kg or 0.59 kg
Parameters and specifications
Brand: ABB
Model: V18345-1020120001
Country of origin: Finland (FI) or Estonia (EE)
Communication protocol: Support Hart communication
Voltage: 24V
Current: 100-400AA
Parameters and specifications
Brand: GE (General Electric)
Series: RX3i PACSystems series
Working voltage: 24VDC
Operating temperature: -40℃ to 70℃
Operating humidity: 5% to 95%
Communication speed: 100Mbps
Communication protocol: Ethernet /IP
Supported chip: FPGA
Dimensions: 125mm x 72mm x 138mm
Weight: 0.5kg
Case material: metal
Mounting method: DIN rail mounting
Ethernet processor speed: 200 MHz
Parameters and specifications
Signal output: 3.6A
Weight: 1.2kg
Input and output voltage range: 20-90ACdc
Power: 240VDC
Internal variable: 5252
Product certification: HE693ADC410A, value is 12.052.052
Size and weight
Weight: 1.2kg
Parameters and specifications
Sensor input: Two independent eddy current sensor inputs, electrically isolated from power input, input impedance >100 kΩ, input voltage range 0 ~ -22 V dc, input frequency range 0 ~ 8 Hz (10 Hz /-3dB).
Measurement range: The configuration software can be continuously adjusted, the specific measurement range is 1mm to 20mm.
Sensor power supply: Each channel is powered by an independent buffer sensor, electrically isolated from the system voltage and power supply, rated voltage -26.7V dc, rated current 20mA/ maximum 35mA.
Control input: Binary input shared by two channels that controls whether the optocoupler output is on, used for channel or module prohibition.
Output voltage: AC voltage signal directly proportional to shaft vibration superimposed on DC voltage, linear range of output voltage -4 ~ -20V (supply voltage -24V), maximum range -1 ~ -22V.
Response time: Approximately 15 seconds
Parameters and specifications
Brand: GE (General Electric)
Series: RX3i PACSystems series
Processor: Intel-based Celeron (Pentium III) microprocessor, probably 300 MHz
Memory: Generally similar to the IC695CPU310, with 10 MB RAM and 10 MB flash memory
Communication interface: An embedded serial port that supports RS-232 and RS-485 communication
Supported Serial protocols: Modbus RTU Slave, SNP, and Serial I/O
Programming support: Support ladder diagram, structured text, C or function block diagram programming languages
Parameters and specifications
Brand: GE (General Electric)
Series: RX3i PACSystems series
Microprocessor: Intel Celeron (Pentium III)
Memory: 10 MB RAM and 10 MB flash
Processor frequency: 300 MHz (as CPU)
Communication interface: An embedded serial port that supports RS-232 and RS-485 communication
Supported Serial protocols: Modbus RTU Slave, SNP, and Serial I/O
LED status indicator: 8 leds on the front of the case are used to display the system status
Block support: A maximum of 512 blocks are supported, and the maximum size of each block is 128 KB
Programming language: Supports ladder diagram, structured text, C or function block diagram programming languages
Execution speed: Typical execution speed is 0.195 ms /1000 Boolean instructions
Clock accuracy: The maximum internal timing accuracy is 0.01%
Parameters and specifications
Brand: Bosch REXROTH
Type: Servo amplifier (servo driver)
Application: Mainly used in high precision positioning system
Control mode: The servo motor is generally controlled through three ways of position, speed and torque to achieve high-precision positioning of the transmission system
series
Series: DKC series
Parameters and specifications
Voltage: 24 VDC
Current: According to the search results, the current parameters of the CI810B are not directly given, but it is mentioned that the current range of some power modules or power supply units may be 100-400A.
Power consumption: 5 W
Operating temperature: -20°C to +60°C
Storage temperature: -40°C to +85°C
Enclosure protection class: IP20
Data transfer rate: 1 Mbps
Size and weight
Dimensions: 110 mm x 60 mm x 25 mm
Weight: 200 g
