Parameters and specifications
Product name: Modicon AS-P890-000 PLC DCS module
Product description: The module is suitable for programmable logic controller (PLC) distributed control system (DCS). It provides advanced control capabilities and reliable performance.
Product parameters:
Input voltage: 24V DC
Output voltage: 24V DC
Power consumption: 5W
Communication interface: Ethernet, RS-485
Programming language: IEC 61131-3
Size and weight
Size: 10cm × 5cm × 2cm
Weight: 100g
Parameters and specifications
Bus current requirement: 750 mA
Typical power consumption: 3 W (or 3.8 W, depending on the specific reference)
Supported series: Quantum 200 Series, 500 Series, 800 Series or SY/MAX (any combination)
Input/output words/drops: 64 input words/drops, 64 output words/drops
Number of branches: 31 branches, up to 32 ports (16 branches)
Communication interface: Implemented through a coaxial cable network, at least one other RIO import module is required
Transmission rate: 1544 Mbit/s
Dynamic range: 35 dB
Isolation voltage: 500 V DC
Parameters and specifications
Technical features:
The open system network is adopted, which conforms to the reference mode of ISO open system interconnection.
It uses a 32-bit microprocessor and touch screen for full CRT operation.
It adopts real-time multi-user multi-task operating system.
Provides greater integration and flexibility in mechanical control.
Control function: The device can be used for tension control, with a variety of control modes, such as point-and-click mode, line speed control for quick stop, roll diameter calculation function, etc.
Parameters and specifications
Type:
High bandwidth Matrix Switch Module (PXI series products)
Gas turbine card module (for monitoring, protecting and controlling the operating status and performance of gas turbines)
Inverter (converts DC energy into constant frequency constant voltage or frequency-regulated voltage alternating current)
Advant 800A series thyristor modules
Dc power module controller (used to control and manage the output voltage and current of the DC power module)
Technical features:
High bandwidth and high density: Support high bandwidth signal transmission to meet the needs of fast signal routing; With high density switching channels
Multi-channel matrix configuration: Provides multiple matrix configuration options to support flexible channel switching and connection
Low insertion loss and high isolation: Ensure the accuracy and reliability of signal transmission
Electrical parameters:
Rated current: 150A
Rated voltage: 1200V
Parameters and specifications
Electrical connection/Component type: 2 Connector with redundant cable /RIO head-tail adapter module
I/O words/drop: 64I/64O
Diagnostic start: LAN controller check; Memory check; Power on
Power consumption: 3W
Required bus current: 750mA
Number of channels: 2 channels
Size and weight
Weight: According to the search results [1], a product is listed as weighing 2KG
Parameters and specifications
Model: AAI143-S00
Brand: YOKOGAWA (Yokogawa)
Application fields: chemical, petroleum, electronics, aerospace, electrical, etc
Input range: May be related to analog signals, but the specific range is not explicitly given in the search results
Number of channels: 16 channels are mentioned in the search results (e.g. for analog inputs or millivolt inputs)
Isolation: Has an isolation function to protect the circuit and signal
Size and weight
Size: The exact size is not explicitly given in the search results, but it is mentioned that the overall size may be 111mm
Weight: 2kg
Parameters and specifications
Input: 16 groups isolated independent channels
Input range (per channel) : 0 to 20.4 mA dc (current limited to 33 mA per channel)
Communication: Communication with its associated FCM or FCP via a redundant 2 Mbps module fieldbus
Input voltage range (redundancy) : 24V DC +5%, -10%
Power consumption:
7 watts at 24 volts DC (good value or maximum)
11 watts at 24 volts DC (good value or maximum), 20.4 MA for all inputs (internal power)
Size and weight
Dimensions (HxWxD) : Approximately 10.2 cm x 11.4 cm (including mounting lugs) x 4.5 cm x 10.4 cm
Shipping weight: about 2 kg
Parameters and specifications
Working voltage: 24VDC
Operating temperature: -40℃ to 70℃
Operating humidity: 5% to 95%
Communication speed: 100Mbps
Communication protocol: Ethernet /IP
Supported chip: FPGA
Product specifications: Size 125mm x 72mm x 138mm, weight 0.5kg
Case material: metal
Mounting method: DIN rail mounting
Applicable model: RX3i controller
Size and weight
Dimensions: 125mm x 72mm x 138mm
Parameters and specifications
Brand: GE Fanuc (or GE General Electric)
Model: IC695CMM004
Communication protocol: Supports Modbus, DNP3 and other protocols
Serial ports: Provides 8 separate and isolated serial ports (note: different from the 4 ports mentioned in the first search result, but may be a later version or newer description)
Baud rate: from 1200 to 115.2 thousand baud
Power requirements: 0.7 amps at 3.3 volts DC, 0.15 amps at 5 volts DC
Maximum overvoltage rating: +/-25 volts
Minimum inter-channel crosstalk: -55 dB
Isolation of ports from the backplane: 250 V AC continuous
Port to port isolation: 500 V DC continuously and 710 V DC for up to 1 minute
Operating temperature range: 0 to 60 degrees Celsius
