Showing 8905–8916 of 14780 results
¥ 6,205.00
Parameters and specifications:
Overall dimensions: 22.9mm x 88.9mm x 127mm
Weight: 0.26kg
Maximum sampling rate: 500 kS/s
Number of channels: 4
Input type: Resistance, voltage
Input range: ±10 V, ±1 V, ±100 mV, ±10 mV, ±1 mV, ±100 μV, ±10 μV
Resolution: 24 bits
Linearity: 0.0025%
¥ 6,205.00
Parameters and specifications:
Type: VersaMax communication module, Genius Network Interface Unit (NIU).
Transmission speeds up to 153.6kbaud are supported, with standard configurations including 153.6kbaud, 76.8Kbaud and 38.4Kbaud.
I/O capacity:
Each rack supports a maximum of eight I/O modules.
Supports a maximum of 8 racks, that is, 64 I/O modules.
Discrete input and output memory are 1024 points.
Analog input and output memory are both 128 bytes.
Scanning capability: Each scan supports 128 bytes of input and output.
Power consumption: 250 mA@4VDC and 10 mA@3.3mA.
¥ 4,150.00
Parameters and specifications:
Input voltage: 24V DC
Input current: Capable of handling short circuits to the power supply at least 30V DC
Output voltage: 0-10V DC
Output current: 4-20mA
Operating temperature range: -20°C to +60°C
Storage temperature range: -40°C to +85°C
Protection level: IP20
Number of channels: 8
Resolution: 12 bits
Input support: HART communication
¥ 6,203.00
Parameters and specifications:
Series: Series 90-30
Power type: PLC power module
Output voltage: 24V DC
Output current: up to 31 amps
Protection function: Support over voltage, over current, short circuit and other protection functions
¥ 5,264.00
Parameters and specifications:
Model: 140ARI03010
Brand: SCHNEIDER/ Schneider
Input quantity/Power consumption: 8/1W
Address requirement: 9 Enter a word
Analog input resolution: 13 bits
Analog input type: Support a variety of temperature probes, such as Pt 100, Pt 200, Ni 100, Ni 200, etc., the temperature range covers -200 ~ 850℃
Input impedance: >= 10 Mohm
Absolute accuracy error: 0.1℃
Linearity error: +/ -0.5 ° C (full range)
Temperature deviation accuracy: +/ -0.9 ℃ in 0 ~ 60℃; +/ -0.5 ℃ at 25℃
¥ 6,235.00
Parameters and specifications:
Input and output:
Ac input:
Single-phase input rated voltage: 220V, 50HZ
Voltage variation range: 220V±20%
Frequency range: 50HZ±10%
Dc output:
Output rating:
2A/220V (AD22002-2)
4A/110V (AD11004-2)
Voltage regulation range:
180V-286V(AD22002-2)
90V-143V (AD11004-2)
Output current limit range: 5%-105%× rated current
¥ 4,521.00
Parameters and specifications:
Model: 5X00119G01
Brand: EMERSON
Type: Input output module DSC card
Voltage: 24V
Current: 100-400A
Application: Suitable for discrete control, sequential control and continuous control
Size and weight:
Size: 10cm
Weight:
1kg
2KG
¥ 6,205.00
Parameters and specifications:
Product model: 170AAI52040
Brand: SCHNEIDER/ Schneider
Type: Distributed analog input module or programmable analog input module
Application fields: chemical, petroleum, electronics, aerospace, electrical, etc
Voltage: DC(9-36)V wide power input
Size and weight:
Dimensions: 111mm
Weight: 2kg
¥ 4,152.00
Parameters and specifications:
Input interface: Contains eight 20 mA DC analog input channels, each of which can accept 2-wire analog sensor inputs, such as 4 to 20 mA transmitters or self-powered 20 mA signal sources.
Accuracy: ±0.05 of the range.
Power requirements:
Input voltage range (redundant) : 26 to 42 volts DC.
Power consumption: 14 W (maximum), heat dissipation: 12 W (maximum).
Communication: via redundant fieldbus.
Size and weight:
Weight: Approximately 2KG
¥ 6,035.00
Parameters and specifications:
Model: D2D146-AA28-28
Brand: ABB or ebmpapst
Type: Centrifugal fan
Motor power: 345W (some data show 290W)
Voltage: 230V
Current: 0.888 A (some data shows that it is 0.881 A)
Air volume: 625m³/h (some data show 800m³/h)
Blade diameter: 146mm
Speed: 2050r/min (some data show 2250r/min)
Temperature range: -25℃~40℃ or -25℃~55℃
IP level: IP44
Weight: 4.8kg
¥ 3,625.00
Parameters and specifications:
Type: Analog input module
Series: GE Fanuc Versamax series
Number of channels: 8 single-ended channels in a group
Voltage range: -10 to +10 volts DC, 0-10 volts DC
Current range: 4-20 mA
Update rate: 0.4 ms
Input filter response: 5.0 ms
Power consumption: 130 mA from the +5V bus
Resolution: 16 bits
¥ 6,235.00
Parameters and specifications:
Type: photoelectric conversion module.
Function: Provides communication between two or more Quantum EIO nodes or network segments via optical cable.
Interface type: Each fiber optic converter has two Ethernet network interfaces and two fiber optic interfaces for media conversion from copper cable to optical cable and from optical cable to copper cable.
Fiber interface: Available in 2 models, the BMX NRP 0200 uses multimode fiber for distances up to 1.24 miles (2 km); The BMX NRP 0201 uses a single-mode fiber optic link for distances up to 9.32 miles (15 km).
System environment: Suitable for Schneider environment.
Output frequency: 24Hz.
Program capacity: 256kbyte.
Size and weight:
Size: Specification 2000mm (may be length).
Weight: About 0.9kg.
