Size and weight
Dimensions: 4.88 inches x 3.28 inches x 1.77 inches (124 mm x 83 mm x 45 mm).
Weight: 0.5 lb (0.23 kg), or 2.1kg (may include packaging or additional parts).
trait
Software configurable: Support RS-232, RS-485 and RS-422 serial communication.
Isolation design: Port to backplane isolation is 250 V AC continuous, port to port isolation is 500 V DC continuous and 710 V DC up to 1 minute.
Fault status report: Provides the fault status report function.
Pluggability: The module can be plugged in and out when the chassis is powered on.
Firmware upgradable: The module firmware can be upgraded.
argument
Input: for eddy current sensor PR642./… Series plus preprocessor CONOX1. Input voltage range is -1… -22 V dc.
Output: The AC voltage signal superimposed on the DC voltage is proportional to the shaft vibration. The linear range of the output voltage is -4… Within -20V (supply voltage is -24V), a large range can reach -1… -22V. The module also provides two current outputs representing characteristic values (can be set to 0… 20mA or 4… 20mA) and two way 0… 10 V dc voltage output.
Accuracy: When connecting different types of sensors, the linear error is different, such as connecting the sensor PR6422 ≤1.5%, connecting the sensor PR6425 ≤6.0%.
Response time: 15ms.
specification
Series: MMS6220 is a model in the EPRO MMS6000 series, which also includes MMS6110, MMS6120, MMS6140 and other models.
Size: The exact size may vary by manufacturer and version, but typically such devices are small and easy to install. For example, some sources mention that the MMS6220 measures 3.1×19.1×12.8cm, but please note that this is not an official figure and refer to the product manual or the information provided by the manufacturer for the actual size.
Weight: Depending on the source, the weight varies, but is generally between 0.2kg and 0.5kg.
argument
Model: 3500/15 106M1079-01
Manufacturer: Bently Nevada (may be written Bentlys Nevada in some sources, but usually refers to the same company)
Input voltage range: According to different sources, there are 12-48VDC and 85 to 264Vac.
Output voltage range: 5VDC
Output current: Max. 10A
Efficiency: greater than 90%
Input frequency: 47 to 63 Hz,
Output frequency: Not directly mentioned, but usually related to the AC power input frequency
specification
Product type: AC power module
Main functions: Provide reliable power supply for the monitoring system to ensure the normal operation of sensors, monitors and other equipment
Size and weight
Size:
170mm x 105mm x 32mm (one source)
120.7 mm x 50.8 mm x 251.5 mm (another source, may be related to specific model or configuration)
Output frequency: 350kHz (However, please note that this information may be related to other models or scenarios, please refer to the product manual for details)
argument
Voltage: 24V (according to one of the search results)
Current: 100-400A (again according to one of the search results)
Working environment:
Operating temperature: -10-70℃ (-40~+85℃ wide temperature optional)
Relative humidity: ≤90% (no condensation)
Storage temperature: -40 ~ 80℃
specification
Mechanical characteristics:
Overall dimension: 132mm105mm52mm
Case: IP30 protection grade, corrugated aluminum reinforced case
Installation method: 35mmDIN rail installation
Net weight: 800g (there are also claims of 2KG, but 800g is more likely to refer to net weight)
Size and weight
Size: 132mm105mm52mm
argument
Operating voltage: Input voltage may include 90-132VAC or 180-264VAC, output voltage may include +5V 20A, +15V 2A, -15V 2A.
Output power: 120W.
Efficiency: >80%.
Ripple and noise: +5V:<2mVrms, +15V:<1mVrms, -15V:<1mVrms.
specification
Protection function: over voltage protection, over current protection, short circuit protection, over temperature protection.
Compliance: Meets various safety standards such as UL, CSA and CE.
Input/output: May contain analog I/O functions for signal input and output.
Size and weight
Dimensions: 216mm x 102mm x 41mm (L x W x H).
Weight: In the search results, there are two statements: 0.8KG and 1.2kg, and the specific weight may vary by product batch or configuration.
series
Parameters and specifications
Input voltage range: According to some search results, the input voltage range may be 12-48VDC, but please note that the specific voltage parameters may vary by application scenario and configuration.
Output voltage range: The output voltage range may include 5VDC, but mainly as an analog output module, its output current range may be more concerned with the current value of the analog signal, such as 0… 20mA, 4… 20mA and 0… 25mA.
Resolution: The resolution of the module varies according to the input range, for example 0… At 25mA, it is 0… 25,000 points, zero… 0 at 20mA… 20,000 points, four… The default value is 0 for 20mA… 16,000 points (can also be configured as 0… 4095 points).
Bus current: The required bus current is 550mA.
Maximum dissipation power: 5.0W.
argument
Input range: 0 ~ 4000psi (pressure input)
Output range: 4 to 20ma DC (current output)
Power supply: 12v DC to 45v DC
Accuracy: +/ -0.1% of the range
Operating temperature: -40 to 85°C (-40 to 185°F)
specification
Material: Stainless steel
Process connection: 1/2 inch NPT
Electrical connection: 1/2 inch NPT catheter
argument
Processor speed: 133 MHz
Typical scan rate: 0.15 ms per 1K logic
User configurable memory: 240 KB
I/O points:
Discrete points: 2048 inputs/outputs
Analog point: 2048 input /512 output
Discrete global storage capacity: 1280 bits
Register memory: can be configured from 128 to 32640 words
Fixed system registers: 28
Communication speed: Ethernet communication up to 100 Mbps is supported
Power supply: 5 volts DC voltage supply, rated power is 7.4 watts
Operating temperature: 0 to 60 degrees Celsius
Storage temperature: -40 to 85 degrees Celsius
argument
Power supply voltage: 200V
Power: 1800W
Operating temperature: -40°F to +150°F (-40°C to +65°C)
Storage temperature: -40°C to +85°C
Energy consumption: Maximum 4.6 watts (or mention 10.5 watts, which may be power consumption under different conditions)
Equipped with interfaces: RS422 interface hardware, 10/100BaseT(X) ports (power consumption range of 3 watts -9.6 watts), 100Base-FX ports for 2
USB cable length: 5 meters
specification
Type: High voltage M-type interface board, a member of the Mark V series optional and replacement board
Main function: Provides interface media from the SCR of the M-frame driver to the power board (DCFB or SDCI) and the power connection card (PCCA)
