Parameters and specifications
Model: 3HNA006147-001
Catalog Description: PDB-01, classified as robot technology in parts, controllers, Robot controllers, IRC5P, IRC5P.001
Country of Origin: China (CN)
Invoice description: PDB-01
Customs Tariff number: 85176200
Size and weight
Net weight: 7kg
Gross weight: 8.5kg
Overall dimensions: No specific dimensions are given directly, but labeled “Spare_Parts”
Parameters and specifications
Type: Digital output module
Input voltage: Multiple voltages may be supported, such as 24VDC or 125VDC (this may vary by model)
Output voltage: 24VDC
Maximum output current: 10A
Operating temperature range: -40℃ ~ +70℃
Communication protocol: Support Modbus, Ethernet, OPC and other communication protocols
Programmability: Programmable, allowing users to configure and program according to specific application requirements
Size and weight
Size: The exact size may vary depending on the search results, but one mentioned size is 120mm x 80mm x 30mm
Weight: 0.5kg
Parameters and specifications
Output channels: The FBM242 provides 16 channels of external source solid-state switching output, each with isolation.
Load capacity:
AC load: Inductive load up to 2A or 20mH at 132V AC (without suppressor).
DC load: Inductive load up to 2A or 50mH at 150V DC (without suppressor); Rated current up to 2A at 60V DC.
Surge current: 20A peak, duration is 16 milliseconds.
Leakage current: less than 1mA; The off state leakage current is 0.1 mA (Max.).
On-resistance: less than 100 milliohm at 20°C.
Power requirements: Input voltage range (redundancy) 24V dc +5%, -10%; When consuming 24 V dc, 3W (Max); There is also information indicating that the input voltage range is 12-48VDC.
Parameters and specifications
Transmission rate: Support 153.5Kbaud standard/extended, 76.8Kbaud or 38.4Kbaud, transmission rate can be configured through software.
Bus terminal resistance: The bus terminal resistance required at both ends of the bus cable is 75, 100, 120, or 150 ohms.
Isolation rating: The isolation rating of the GE controller is 2000 volts and the transient common mode rejection isolation rating is 1500 volts.
Rated current: 300 MA.
Rated voltage: 5 V DC.
Size and weight
Size: Depending on the search results, the exact size may vary by supplier or packaging. For example, some suppliers provide a package size of 135413145mm, but this may be the size of the package box rather than the size of the module itself. The module itself is usually small in size and suitable for installation into a PLC system.
Parameters and specifications
Communication protocol: RS-422/RS-485
Number of ports: 2 ports
Communication rate: 1200 bps to 115.2 kbps
Input signals: 0-10VDC, 4-20mA DC, 1-5VDC, 2-10VDC
Output signal: 0-10VDC, 4-20mA DC, 1-5VDC, 2-10VDC
Measuring range: 0-9999
Accuracy: ±0.5% F.S.
Power supply: 24VDC±10%
Size and weight
Size: 48mm x 96mm (width x height)
Weight: Not explicitly given, but usually the weight of the communication module is light, perhaps less than 1kg
Parameters and specifications
Function: HIMA F3330 digital output modules are commonly used to output digital signals to external devices such as valves, relays, motor starts and stops, etc., to control various industrial processes.
Applications: This type of digital output module is widely used in industrial automation systems to control and monitor various equipment and processes, ensure the normal operation of factories and equipment, and achieve automatic control.
Communication interfaces: A variety of communication protocols and interfaces may be supported, but details may vary by model.
Parameters and specifications
Communication interface: RS-485
Communication rate: 9600bps
Voltage: 24V
Operating temperature range: 0°C~55°C
Size and weight
Size: 120mm×80mm×40mm
Weight: About 0.5kg
series
The IC695NIU001 module is part of the AB 1769 series under the ALLEN-BRADLEY brand from Rockwell Automation. The series is a series of compact programmable automation controllers and modules designed for small and medium-sized industrial automation control systems.
Parameters and specifications
I/O points: Can be configured to handle any combination of discrete I/O and analog I/O, with a maximum number of 1024 discrete input, 1024 discrete output, 64 analog input words, and 64 analog output words.
Communication interface: Has a 15-pin RS-422/485 compatible serial port and a 9-pin IC66 handheld monitor port. Dedicated IC66 bus terminals that support redundancy.
Compatibility: Compatible with handheld monitors version 4.0 or later, directory number IC660HHM501G; CPU firmware version 2.0 or higher, MS-DOS programming software version 3.0 or higher, bus controller version 3.0 or higher if used with IC697 PLC module.
Size and weight
Size: According to the search results, the IC697BEM733 measures approximately 170mm x 105mm x 32mm.
Weight: About 120g.
Parameters and specifications
Processor speed: 300 MHz
Memory: 10 MB RAM and 10 MB flash
Microprocessor: Intel Celeron (Pentium III)
Block support: Up to 512 blocks are supported, with a maximum size of 128 KB for each block
Programming language: Support ladder diagram, structured text, function block diagram and C language
Execution speed: Typical execution speed is 0.195 ms /1000 Boolean instructions
Internal clock: With an internal daytime clock with a maximum deviation of 2 seconds per day and an internal timing accuracy of up to 0.01%
argument
Transmission speed: Support 153.6kbaud transmission speed, the standard configuration includes 153.6kbaud, 76.8Kbaud and 38.4Kbaud.
I/O module support: Each rack supports a maximum of eight I/O modules, a maximum of eight racks, and a total of 64 I/O modules.
Storage capacity: discrete input and output can accommodate up to 1024 points; Analog input and output memory are 128 bytes each.
Network scan: Each scan supports 128 bytes of network input and 128 bits of output.
specification
Size: Depending on the search results, the size will vary slightly. One is described as 166mm x 112mm x 36mm and the other is 170mm x 105mm x 32mm.
Weight: about 375g (one description), or about 120g (another description).
Voltage range: Input voltage range is 12-48VDC, output voltage is 5VDC, and maximum output current is 10A. There are also descriptions that mention voltage ranges including 220VDC, but this may be related to specific application scenarios.
Parameters and specifications
Product type: CC-U/STD Universal Signal Converter.
Configuration: There may be more than 120 configurations.
Electrical isolation: 3-way electrical isolation.
Input signal interrupt response: Configurable output signal response (low fail-safe/high fail-safe).
Input signal range: including 0.9 MA… 55 milliamps, 45 millivolts… 11 volts, 470 ohms… 1 milliohm and many other ranges.
Output signal range: 0… 55 mah, 0… 11V and many other ranges.
Rated power supply voltage: 24-48 V DC.
Accuracy: 0.1% of full scale.
Response time: 200 seconds.
Ambient temperature range: -20… +60 ° C (standard) / -40 ° C… +80 degrees Celsius (extended).
Size and weight
Dimensions: Length x width x height = 12.0 x 2.25 x 10.5 cm.
Weight: 0.125 kg (product itself), shipping weight is 1Kg.
Parameters and specifications
Input type: Eight analog sensor signal input channels support different signal ranges, including 0 to 20mA DC (FBM201), 0 to 100mV DC (FBM201b), 0 to 5V DC (FBM201c), and 0 to 10V DC (FBM201d).
Input channel isolation: Each analog input channel is isolated from other channels and ground currents.
Communication interface: communicates with its associated FCM or FCP via a redundant 2 Mbps module fieldbus.
Calibration requirements: No calibration modules and terminal components are required.
Size and weight
Dimensions: Length x width x height = 10.4cm x 4.5cm x 11.4cm.
Weight: 0.284 kg