Parameters and specifications
Working voltage: 220V
Output frequency: 30kHz
Protection level: IP68
Resolution: 1080P
Communication interface: Supports a variety of communication protocols, such as IEC 61850, Modbus, etc
Program capacity: 512MB
Power supply: 220V
Current: 5AmA
Operating temperature: 40°C
Size and weight
Size: Specification size 100mm
Weight: 4kg net weight
Parameters and specifications
Manufacturer: General Electric (GE)
Series: Mark VI series
Type: PCB components for industrial control systems
Interface: Has a 37-pin (female) D-connector and a three-pin female plug
Components: Consists of more than 80 resistors, capacitors, diodes and a single integrated circuit
Control function: Up to twelve relays can be controlled and discrete output I/O packets are provided
Size and weight
Weight: Approximately 2.1 kg
Parameters and specifications
Multi-channel control: The F31X305NTBANG1 typically has multiple control channels that can simultaneously monitor and control multiple industrial process variables.
Communication interface: supports a variety of communication interfaces, such as Ethernet, serial port (RS-232, RS-485), Profibus, Modbus, etc., in order to exchange data and communicate with other devices and systems.
High Performance processor: A processor equipped with high performance for performing complex control algorithms and logic.
Storage capacity: Sufficient storage capacity to store applications, configuration data, historical data records, and alarm information.
Real-time operating system: Run a real-time operating system to ensure timely execution of control tasks.
Parameters and specifications
Type: Ethernet module, commonly used for communication in industrial automation and control systems.
Transmission rate:
10/100 Mbps transmission rate is supported.
Some information indicates that IC695ETM001-EH may support higher transfer rates (such as 1000 Mbit/s), but this does not match the description of the standard IC695ETM001 and may be a parameter of a different model or an upgraded version.
Ports: Has two (2) RJ45 Ethernet ports.
Protocol support:
Supports the Layer 4 TCP/IP protocol stack.
The SRTP (Service Request Transport Protocol), Modbus TCP, and EGD (Ethernet Global Data) protocols can be executed.
Processor speed: Ethernet processor speed is 200 MHz.
RS-232 Serial port: Supports data transfer rates from 1200 bps to 115200 bps.
Parameters and specifications
Voltage: 24V
Current: 100-400A
Power frequency: 47 ~ 63Hz (good)
Voltage drop: 1.5V
Discrete output voltage range: 83 ~ 253V AC
Response time: Response time from state 0 to state 1 ≤0.5 ms
Size and weight
Size:
Overall dimension: 132mm105mm52mm
Dimensions (with terminal) : 140L105W25.5H mm
Weight: 2KG
series
The 140 series discrete output module from Schneider
Parameters and specifications
The HIMA F3330 is a digital output module commonly used to output digital signals to control equipment or actuators to control various industrial processes.
Application: Widely used in industrial automation systems to control and monitor various equipment and processes to ensure the normal operation of factories and equipment.
Number of channels: According to some information, the F3330 may have 8 channels, but please note that this may require further confirmation.
Communication interface: Standard communication protocol interfaces may be supported, such as RS-485, RS-232, etc., but you need to consult the product manual for details.
Size and weight
Dimensions: External dimensions are 140 mm x 95 mm x 82 mm
Weight: Some information indicates that the weight is 0.7 kg
Parameters and specifications
Communication interface: supports a variety of communication methods, including Profibus DP bus, optical fiber interface, etc., can achieve high rate and long distance data transmission.
Communication rate: Supports various rates, such as 9.6kBit/s, 19.2kBit/s, and up to 12MBit/s.
Data electrical interface: 9-pin Sub_D jack connector, pin definition in line with Profibus DP protocol specification.
Fiber interface: Support multi-mode and single-mode fiber, transmission distance up to 2Km (multi-mode) or 20Km (single-mode).
Electrical parameters: such as lightning protection, overcurrent protection, surge protection, etc., to ensure the stable operation of the equipment in harsh environments.
Size and weight
Size: The exact size may vary by model or manufacturer. For example, in some applications, the dimensions of the BCU-12 may be 25x136x92mm², while in other scenarios, the dimensions may vary.
Weight: Again, the exact weight is determined by the specific model or manufacturer. For some models, it may weigh 0.3kg.
Parameters and specifications
FAS-113DG is a synchronizer used to synchronize a generator to the busbar.
It has a dynamic synchronization function to ensure that the reverse power condition is prevented at the difference frequency.
FAS-113DG determines when to send a closing signal to the generator switch by comparing the actual measured slip rate with the closing time of the circuit breaker.
It also has analog frequency outputs and analog voltage outputs to jointly control the frequency and voltage of DEIF load distribution units such as LSU-112/113/114DG and LSU-122DG.
Parameters and specifications
Number of channels: 16 analog input channels.
Input signal: 0(4)-20 mA.
Power Supply: 24 VDC.
Input current: 500mA.
Output voltage: 24VDC.
Output power: 360W.
Input voltage range: 85~264VAC.
Operating temperature range: -25~70℃.
Storage temperature range: -40 ℃ to 85℃.
Size and weight
Dimensions: 10.2 x 7.6 x 1.2 inches
Weight: 1.2 pounds (about 1.2kg).
Parameters and specifications
Type: Relay modules, part of Bently Nevada’s product line of monitoring and control systems.
Monitoring function: The vibration level of mechanical equipment can be monitored by installing vibration sensors (such as acceleration sensors or speed sensors).
Alarm and protection: With alarm and protection functions, an alarm can be triggered when the vibration level exceeds a preset threshold or the device has an abnormal vibration mode.
Communication interface: There may be a communication interface, such as Modbus or Ethernet, for data exchange and communication with other devices or monitoring systems.
Programmability: Supports user-defined parameters and logic to adapt to different application scenarios and requirements.
Data logging: May have a data logging function to record the operating status and historical data of the device.
Size and weight
Size: The exact size may vary by model and configuration, but depending on some search results, similar products may be 138mm x 36mm x 145mm (length x width x height).
Weight: About 0.3kg. Note, however, that this is only an approximation and the weight of the actual product may vary.
Parameters and specifications
Brand and Model: SCHNEIDER, model 140ACI04000.
Type: PLC module, especially analog input module.
Electrical parameters:
Input voltage: 24VDC.
Input current: 40mA.
Input impedance: 3.75kOhm.
Output voltage: 5VDC.
Output current: 10mA.
Output impedance: 300 ohms.
Communication protocols: Support for multiple communication protocols including Modbus TCP/IP, EtherNet/IP and Profinet for seamless integration with other devices and systems in industrial networks.
Parameters and specifications
Processor speed: 1.1 GHz Atom processor.
Boolean logic execution speed: 0.72 ms/k.
Memory: 10 MB of non-volatile flash memory for storing data and programs.
Communication interface:
Embedded Ethernet interface, support SRTP protocol, data transfer rate of 10/100 Mbaud.
Two serial ports (RS-232 and RS-485).
I/O capability:
Discrete input and output signal capacities up to 32K bits.
Analog input and output capacity up to 32K words.
Supported protocols: Modbus RTU Slave, SNP, Serial I/O, Modbus TCP server and client, PROFINET, EGD, Profibus DP, etc.
Size and weight
Dimensions: 170mm x 105mm x 32mm.
Weight: About 120g.