1. Parameters
Processor speed: 1.1 GHz Atom processor
Memory: 10 MB battery-powered non-volatile flash memory
Boolean logic execution speed: 0.72 ms/k
Communication interface: two serial ports (RS232 and RS485) and an Ethernet communication interface
I/O capacity:
Discrete input/output: up to 32K bits
Analog input/output: 32K words
Block support: Up to 512 blocks, each block up to 128 KB
2. Specifications
Power requirements: 3.3 volts DC, 5 volts DC or 24 volts DC
1. Parameters and specifications
Chipset: Uses the latest Intel chipset technology, including the 815E chipset.
Processor: Typically equipped with high-performance processors capable of handling complex control algorithms and real-time data.
Scalability: Supports a variety of expansion cards and peripherals, such as hard drives, graphics cards, network cards, etc., which is convenient for users to customize and expand according to specific application requirements.
Communication interface: Usually equipped with a variety of communication interfaces, such as Ethernet, serial communication interface, etc., for integration with other devices and systems.
Programming environment: Supports a variety of programming languages and development environments, including ladder logic, Function Block Diagram (FBD), Structured Text (ST), and more.
1. Parameters and specifications
Smart I/O Remote Module: The MP3010 may be a smart I/O remote module (base unit), usually used as a slave line on the CS31 system bus. The module has a voltage of 24V and a current range of 100-400A, and weighs 2KG.
Motor relay Protector: The EATON MP3010 motor relay protector is 10.25×3.76×72 inches, is black, weighs 5.75 pounds, operates at 240 volts AC and is CSA certified.
Camera module: The Tenglong MP3010M-EV is a camera module with an ultra-compact body design, only 59mm long, weighing 70g, supporting high-definition video output up to 1080/60FPS, and equipped with 10x optical zoom.
1. Parameters
Processor speed: 26MHz
Current: 56mA
Operating system: An Ethernet operating system is required to use Ethernet features, and the operating system can be loaded into the local rack via a personal computer with AutoMax execution software installed. The operating system is available in three versions: 6010/6011 standard, 6010/6011 Ethernet, and 7010 standard.
Communication capability: All AutoMate processors are capable of communicating over R-Net, connecting point-to-point industrial networks or nodes of up to 32 sites together on a single coaxial cable.
2. Specifications
Installation requirements: The 57C431 processor module must be installed in a rack.
Function support: Support the control of automation equipment such as motors, generators, drive systems, programmable logic controllers, power electronics and robotics products in automation systems.
1. Parameters
Power consumption: Power consumption of 800VDC is 5mA, and power consumption of 3VDC is 24mA. There is also information that the 5VDC power consumption is 800mA, and the 24VDC power consumption is 3mA, which may vary depending on the specific configuration or version.
Version compatibility: Version 16 or later is required when used with additional directives (AOI/AOC); To use with the provided example ladder diagram program, version 15 or later is required.
Configuration tool: The ProSoft Configuration Builder (PCB) is required to input the configuration of the module.
Number of Modbus connections: Supports up to 30 Modbus clients and 20 Modbus servers.
Network port: Equipped with a single Ethernet communication port that supports 10/100 Mbps transmission rates and is able to detect the use of automatic crossover cables.
Server architecture: Demonstrates greater responsiveness in multi-server architectures, minimizing the impact on other servers when a server suddenly goes offline.
1. Parameters
Number and type of output channels: DSDI452 has 7 channels of digital output, the output type is relay output, suitable for AC5~250V/DC5~30V voltage range.
Analog output range: Although the DSDI452 is mainly used as a digital output module, it also supports analog output (only one can be selected per channel), ranging from 0 to 20mA, 4 to 20mA, 0 to 5V and 0 to 10V.
Power supply and power consumption: Rated voltage is AC85~265V, power consumption is 5V/0.55A and 24V/0.2A. There is also information that the DSDI452 has a voltage of 24V and a current range of 100-400A, but this may refer to the voltage and current requirements of the device in a specific application or configuration, rather than its standard power supply parameters.
Communication interface: The module has two communication ports, RS232 and RS485 respectively.
1. Parameters
Sensor type: CMOS
Sensor size: 1/2.3 inch
Resolution: 4000 x 3000 pixels
Frame rate: 30 frames per second
Interface: Gigabit Ethernet
Operating voltage: May vary depending on the specific configuration, some information mentions 240V, but more commonly it may be 12V DC
Output frequency: 100kHz is mentioned in a specific context, but usually the camera output frequency is related to the frame rate, and it is possible that this information refers to other technical parameters
2. Specifications
Dimensions: 29 mm x 29 mm x 44 mm
Weight: 50g (camera itself), there is also information mentioning 3.5kg (may be the total weight including packaging or accessories)
1. Parameters and specifications
Input DC power: 18VDC to 80VDC.
Output phase current: 0 ~ 8A.
Applicable motor: three-phase hybrid stepper motor (such as SM3 series, 0.4 ~ 6Nm).
Control mode: Support position control mode and speed control mode.
Operation mode: including network command mode, pulse/direction mode, analog signal mode, independent operation mode and double pulse mode.
Communication protocol: Integrated standard MODBUS protocol, support standard CANOPEN protocol.
1. Parameters and specifications
Model: 3HAC14265-1
Applicable object: ABB robot
Processing customization: No
Machining accuracy: 0.01
Material: Copper
Color: Silver
2. Size and weight
Size: Some information indicates that its size is 280200330mm, weight is 5.92kg
1. Parameters and specifications
Winding code: 61, this is the number that specifies the electrical characteristics of the motor.
Feedback system: Equipped with a rotary transformer motor feedback system, it provides accurate position and speed feedback, which is essential for achieving high precision control.
Drive mode: Driven by an optical shaft with a key, according to DIN6885-1, and with a shaft seal ring, suitable for use in demanding mechanical interfaces.
Lock torque: 22Nms, to ensure that the load position can be maintained when there is no power supply.
Rated voltage: 400V.
Rated frequency: 50/60 Hz.
Protection class: IP65.
Weight: 10.5kg.
1. Parameters and specifications
Voltage: Some information mentions that the voltage of the GD9924BE is 24V, but it may vary depending on the specific model.
Current: In another context, it is mentioned that the GD9924BE has a current range of 100-400A, but this may not be applicable to all models or application scenarios.
Output current range: When used as an adjustable current booster or high current generator, the output current of GD9924BE can reach 50 ~ 30000A.
Working time: rated output working time is 2.5 minutes, 1/2 rated output working time is 30 minutes, 1/4 rated output can be used for a long time.
