Parameters and specifications
Product Type: PROFIBUS Redundancy Link Module (PROFIBUS Redundancy Link Module)
Communication protocol: Supports Profibus DP protocol
Voltage: Output voltage 24VDC, voltage range may include 220VDC
Operating temperature range: 50~80℃
Output range: MA 122
Input range: MA 224
Scope of application: petroleum, chemical, natural gas and other industrial fields
Size and weight
Size: 100mm x 50mm x 20mm
Parameters and specifications
Input voltage range: 12-48VDC
Output voltage range: 5VDC
Output current: Max. 10A
Efficiency: greater than 90%
Communication protocols supported: SNMP, TL1, RMI, CORBA, HTTP and HTML
Product certification: UL 508, CE, C-Tick, compliant with IEC 61000-4-16, CSA C22.42, EN 55011, etc
Size and weight
Size: Depending on the search results, the size will vary slightly. It is mentioned that the width is 167mm and the height is 50mm, and it is also mentioned that the dimensions are about 170mm x 105mm x 32mm.
Weight: Net weight 0.554kg, but there is also mention of a weight of about 120g or 1.35kg, which may be due to differences in different configurations or packaging.
series
Series: Quantum series, the Quenten S908 remote 10-station adapter module for ePAC systems.
Parameters and specifications
Manufacturer: Schneider Electric
Type: Quantum Hot Standby CPU (HSBY), part of the Modicon Quantum automation platform family
Clock frequency: 266 MHz
Memory capacity:
Internal RAM: 1024 kB and 512 kB are dedicated to data
Scalable file storage capacity: 8 MB via PCMCIA card
Expand program storage capacity: 7168 kB with PCMCIA card
I/O features: Dedicated I/O includes counters, accurate timestamps, high-speed interrupt outputs, and serial links
Size and weight
Dimensions: 166mm x 112mm x 36mm
Weight: about 375g (another term is 0.3673kg)
Parameters and specifications
Type: DCS or controller module
CPU: Intel Core 2 Duo L7400 1.5GHz CPU (may be periodically upgraded to take advantage of Intel’s new processors)
Memory: Up to 4 GB of ECC memory, 2 GB of on-board NAND flash module
Interface:
Onboard x8 PCI Express controller
Two gigabit Ethernet ports
Two SATA ports
USB 2.0 port and COM serial port are available
Power and temperature: Optional products that support extended temperature ranges (-40°C to +55°C), allowing deployment in places such as outdoors
System environment: constant temperature
Operating system: Supports standard distribution Linux and carrier Linux
Parameters and specifications
Interface type: PCI Express (PCIe)
Memory: Can be configured as 128 MB or 256 MB of on-board SDRAM
Transfer rate: from 43 MB/s (4-byte packets) to 170 MB/s (64-byte packets)
Packet size: Dynamic packet size, supporting 4 to 64 bytes of data
Number of nodes: Data sharing between up to 256 independent systems (nodes) is supported
Fiber connection: Support multi-mode fiber up to 300 meters, single-mode fiber up to 10 kilometers
Signal frequency: PCI Express 2.5GHz signaling
Operating temperature: -40°C to 85°C
Parameters and specifications
Communication protocols: Support a variety of communication protocols, including Modbus RTU/ASCII, DF1, ASCII, DH485, Modbus TCP/IP, EtherNet/IP, etc.
Serial port: Equipped with dual RS232 serial application ports supporting RS232/RS485 and RS422 electrical standards, the baud rate can be configured from 110 baud to 115.2 kbps.
Debugging/Configuration port: With an RJ45 Ethernet port supporting 10/100 base-T transfer speeds, link and active LED indicators, and automatic cross cable detection.
Data memory: Users can define a modular data memory map of up to 10,000 16-bit registers.
Configuration tools: You can use ProSoft Configuration Builder(PCB) and Product Discovery Service (PDS) to configure module operations and parameters.
Size and weight
Weight: Approximately 2KG
Size and weight
Size:
5.1 cm x 12.7 cm x 11.4 cm
36*42mm
Weight:
0.3 kg
0.36 kg
series
The FBM233 P0926GX belongs to the FOXBORO family and is commonly used in industrial automation and control systems.
Parameters and specifications
Protection function:
Three-phase thermal overload protection
Three-phase motor start-up Monitoring (based on thermal stress calculation)
Three-phase overcurrent protection (with timing feature and speed switch lockout)
Three-phase short-circuit protection (with instantaneous or timing characteristics)
Non-directional ground fault protection (with timing characteristics)
Three phase unbalance protection based on negative phase sequence current
Inverse phase protection based on negative phase sequence current
Cumulative start time counter (with restart suppression)
Circuit breaker fault protection
Temperature protection for timing characteristics
Parameters and specifications
Digital input/output channels: there are 4 digital input channels and 4 digital output channels.
Backplane current load: 5 volts DC ±5% Max 1100 MA.
Operating voltage: Input voltage range is 110-240V.
Operating temperature: 32 ° F to 140 ° F (0°C to 60 °C), or -40°C to +85°C.
Storage temperature: -40 ° F to 185 ° F (-40 ° C to 85 ° C), consistent with the low temperature end of the above operating temperature.
Relative humidity: 5% to 95% (non-condensing).
Frequency range: 47-63 Hz.
Output current: 0-5A.
Output voltage: 100A (but please note that this may be an error or misunderstanding here, as usually the output voltage is not expressed in amps (A), may refer to other parameters or there is a clerical error).
Output power: 40W.
Size and weight
Dimensions: The housing dimensions are 120mm x 80mm x 30mm.
Weight: 2.3kg.
Parameters and specifications
Input voltage: 48V DC (24V DC input voltage is also mentioned, but the main specification is 48V DC)
Output voltage:
24V DC (for 48V DC input)
5V DC (there is a variant mentioned, but not the main specification)
Output current:
22A (for 48V DC input, 24V DC output)
40A (variant for 24V DC input, 5V DC output)
Rated power: 528W (for 48V DC input, 24V DC output)
Efficiency: >89%
Ripple and noise: <2mVpp
Size and weight
Size:
220 mm x 130 mm x 60 mm (for some variants of DSSR122 48990001-NK)
250×190×180mm³ (another size mentioned)
Weight: 2KG
Parameters and specifications
CPU Model: Pentium III 500 (variants of other models such as Pentium III 266 and 166 are also mentioned)
Memory: 64MB DRAM (other models may vary, such as 32MB or 4MB)
SRAM: 512KB
Removable application memory card: CompactFlash
Slots:
The 3CP260.60-1 version usually has 1 or 3 slots for aPCI modules
Some variants may come with additional slots, such as PC card slots or RS232 interfaces
Parameters and specifications
Input voltage: 24V DC
Output voltage: 5V DC
Maximum voltage: 42.5V AC/DC
Recommended input range: 20-42.5V DC
Input frequency range: DC or 47.63Hz
Operating temperature: -40℃~85℃
Communication protocol: Modbus, Ethernet
Size and weight
Dimensions: 100mm×50mm×20mm
Volume Weight: 9.5 kg (may include packaging, etc.)
Actual weight: 4 kg
Shipping weight: 10.5 kg