argument
Communication protocols: Support for Modbus TCP/IP, allowing easy connection to devices using Modbus TCP/IP, including Modicon PAC and various instruments and devices.
Network interface: Ethernet interface provides high-speed network communication capability.
Client connection: Supports a maximum of 100 client connection commands.
Storage configuration: Provides 16-bit memory CIP-connect-enabled network configuration.
specification
Brand: ProSoft Technology.
Operating system: PLC system.
Power supply: The working voltage is usually 220-380V
Output frequency: Usually 30-55Hz
Environment: The ambient temperature ranges from 1 to 50 ° C, and the ambient humidity ranges from 10 to 90%RH
argument
Voltage: 24V
Current: 100-400A
Output frequency: 50HZ
Communication protocols: Support common industrial communication protocols, such as PROFIBUS, Modbus, etc
Communication rate: Supports a variety of rates, including 9.6kBit/s, 19.2 kBit/s, 45.45kBit/s, 93.75k kBit/s, 187.5kBit/s, 500kBit/s, 1.5MBit/s, 6MBit/s, and 12MBit/s
Lightning protection: 4000V
Overcurrent protection: 1.5A
Surge protection: 600W
Optical fiber wavelength: multi-mode 850nm, 1310nm; Single mode 1310 nm, 1550nm
Transmission fiber: multi-mode 50/125um, 62.5/125um, 100/140um; Single mode 8.3/125um, 9/125um, 10/125um
Transmission distance: multi-mode 2Km, single-mode 20Km, more distance optional
specification
Module type: analog expansion module
Function: Expand the analog input/output channel in the industrial automation system to realize the monitoring and control of various process variables
Size and weight
Size: Specification size may be 5SHX2645L0004mm
Weight: About 1.5kg
argument
Communication protocol: Support Modbus RTU, Modbus TCP/IP, DF1, ASCII and other serial communication protocols.
Data conversion and mapping: Allows users to configure Modbus registers in ControlLogix PLC to realize mapping between PLC data and Modbus registers.
Baud rate: 110 to 115K.
Data size: 7 or 8 bits.
Stop bit: 1 or 2.
Parity: None, parity, and parity.
specification
Brand: ProSoft Technology.
Support system: PLC.
Module rate: IP20, Class I, 2/ZONE 2.
Module density: range from 4 to 32 points.
Size and weight
Length: 265MMcm.
Outer diameter: 98MM.
Weight: About 1kg
argument
Operating ambient temperature: -25°C to +65°C
Storage temperature: -40°C to +85°C
Relative humidity: 95% (no condensation)
Current: 2-wire system, Rmax = [(VS – VS min) / 0.02] (specific calculation needs to be based on voltage range)
Control power input range: 110 to 250 volts DC, 100 to 240 volts AC, frequency 50/60 Hz
Differential switch time delay: <200 ms
Phase current input: 1 A (otherwise 1 A and 5 A)
specification
Product Type: Motor management relay
Manufacturer: General Electric (GE)
dimension
Width: Approximately 11 cm (5.5 inches, 13.97 cm)
Height: Approximately 30 cm (11.5 inches, 29.21 cm)
Length: Approximately 21 centimeters (8.5 inches, or 21.59 centimeters)
weight
Box weight: 10 pounds
Outside weight: about 8 pounds
argument
Model: RMP200-8
Power supply: 24V DC power supply
Power consumption: 10 watts
Interface: CAN, RS-232, RS-485, USB
Maximum torque: 8 N · m
Maximum speed: 200 RPM
Resolution: 0.0001 degree
Repeated positioning accuracy: 0.0005 degrees
Operating temperature: -40°C to +85°C
specification
Size: 200 mm x 200 mm x 50 mm
Weight: 2.5 kg
argument
Rated current: 40 A
DC bus nominal voltage: DC 700 V
Input voltage: 200-480 V AC ±10% / 16 A / 50-60 Hz
Output voltage: 480 V AC voltage 11 A 0-1000 Hz
specification
Type: Servo drive controller
Series: 02 series, 3rd edition
Brand: REXROTH/ Rexroth
Control interface: SERCOS interface, used for command communication
Size and weight
Overall dimension: 132mm105mm52mm
Net weight: 800g
argument
CPU performance: 1 GHz
Memory: 64 MB non-volatile flash memory and 64 MB battery-operated random access memory (RAM)
Power requirements: +3.3 volts DC: 1.0 amp nominal value, +5 volts DC: 1.2 amp nominal value
Operating temperature: 0 to 60 degrees Celsius (32 to 140 degrees Fahrenheit)
Time clock accuracy: Maximum drift of 2 seconds per day
specification
Manufacturer: GE Fanuc
Product number: IC695CRU320
Product type: PACSystems RX3i Redundant CPU
Communication protocol: Support Modbus RTU slave, SNP, etc
Embedded communication: RS-232, RS-485
Backplane bus: Dual backplane bus supports RX3i PCI and high-speed serial bus PCI, and the system design conforms to PCI 2.2 standard
argument
Memory: 850 KB SRAM, 1.5 MB FlashPROM
Interface: 1 RS232 interface, 1 CAN interface (electrical isolation)
Digital input: Up to 12 digital inputs, 24 VDC, receiver
Digital output: Up to 12 channels digital output, 24 VDC, 0.1A
Analog input: 6 analog inputs, ±10 V, 14 bits
Analog output: 6 analog outputs, ±10 V, 12 bit, each terminal with 10 V and -10 V
specification
Brand: B&R
Model: 3IP161.60-1
Product type: Programmable I/O processor
argument
Voltage: 24V
Current: Loop powered device Max. 25mA, isolation 24V+ 5% regulation
Power consumption: 8.3W (Max), 7.5W (typical)
Measuring signal range: 0 to 25mA (linear)
Maximum line resistance: 500 ohms loop resistance, including sensor
Isolated breakdown voltage: > 50V dc to system 0V
specification
Brand: Honeywell
Model: 05704-A-0145
Type: four-channel control card
Input type: 4-20 MA Input
Size and weight
Weight: varies from description to description, such as 0.18kg (net weight of product), 1.5kg (material weight of product), 2KG (shipping weight)
Size: 20cm x 10cm x 5cm
