Power supply voltage: 24VDc, additional information indicates that the input voltage is 220VAC and the output voltage is 24VDC.
Maximum current: Some information indicates A minimum of 500mA (no channel/transmitter power supply) and a maximum of 1.5A (transmitter power short circuit), but some information indicates a current range of 100-400A. This may be due to different current requirements in different configurations or application scenarios.
Operating voltage: In some cases the operating voltage is mentioned as 106.98V, but usually the supply voltage is 24VDc.
specification
Shell material: aluminum alloy.
Case color: gray.
Protection level: IP20, but please note that this usually refers to the dust and water resistance rating of the module, which may vary for power modules or other types of modules.
Parameters:
CFG-RD500-NN-T1 is known to have a voltage of 24V and a current range of 100-400A.
Specifications:
CFG-RD500-NN-T1 is a servo drive or related control module.
Weight:
CFG-RD500-NN-T1 is known to weigh 2KG.
Features:
CFG-RD500-NN-T1 has value keys for scrolling through possible options for enumeration Settings, and can reduce and increase numeric Settings.
It also has a help message display that automatically scrolls through all the messages that are currently appropriate.
The Reset key can reset any lock condition that is not currently active.
Outer diameter: Suitable for various types of three-phase hybrid stepper motors with outer diameter of 86-130mm
specification
Internal circuit: The circuit similar to the servo control principle makes the motor run smoothly at low speed, almost no vibration and noise, and the torque of the motor is much higher than that of the two-phase and five-phase hybrid stepper motor at high speed
Volume: 200x156x90(mm³)
Net weight: 1.6kg
Phase memory function: The driver automatically remembers after the input pulse stops for more than 5 seconds
Programmability: allows users to configure and customize according to specific application requirements.
Protection function: including overload protection, overheat protection, undervoltage protection, etc.
Size and weight
Size: The specification is 263337 (may refer to the length, width and height, but the unit is not clear), and the net depth/length of the product is 135mm.
Processor: An 800 MHz ARM Cortex A8 processor with powerful processing power.
Memory capacity: 4 GB eMMC Flash memory and 512 MB DDR3 RAM for fast response to control commands.
Operating system: Support ABB’s own operating system Trio OS or Linux operating system.
Communication protocols: Support a variety of communication protocols, including Modbus RTU/TCP, IEC 60870-5-101/104, DNP3, OPC UA, etc., to facilitate communication with different types of devices.
I/O ports:
Number of digital input/output ports: Supports a maximum of 32 DI/ DOS.
Number of analog input/output ports: Up to 8 AI/ AOs are supported.
The number of DI/DO or AI/AO can be expanded through the PM8M22 or PM8M26 expansion modules.
