argument
Main power supply: AC220V 50Hz (allowed in the range of 85%~110%)
Standby power supply: ensures that the monitoring device works for at least 8 hours when the main power supply is at low voltage or in a power outage
Communication protocol: Modbus-RTU
Communication mode: RS485 half-duplex bus mode, transmission distance 1km (can be extended by repeater transmission distance)
specification
Monitoring capacity: ≤128 points
Display mode: 320*240 lattice LCD
Input/Output module: built-in remote intelligent I/O module
Standby power: DC24V, 10Ah (optional larger capacity battery)
Parameters and specifications
CPU: 25 MHz
Memory: 512 KB RAM, 1 MB flash
Input and output:
16 numeric inputs
8 digital outputs
2 analog inputs
Interface: CANopen interface
series
Series: F8650 series
trait
High reliability: The F8650E is a high performance industrial safety system module designed to provide reliable and efficient safety solutions.
Versatility: Supports a variety of inputs and outputs, suitable for a variety of industrial applications.
Environmental adaptability: The design takes into account the adaptability of harsh environments and is capable of long-term stable operation in challenging industrial environments.
argument
Number of entries: 24
Input type: dry contact
Input signal level: 24 V DC
Output quantity: 12
Output type: Relay output
Output signal level: 24 V DC
Rated current: 10 A
Rated voltage: 250 V AC/DC
Communication interface: Two Ethernet ports (100Base-TX)
specification
Dimensions: 230 mm x 170 mm x 85 mm
Weight: 2 kg
Mounting type: DIN rail mounting
Certification: CE, UL, CSA, C-Tick, RoHS
Operating voltage: May include nominal 24 VDC, minimum 12 VDC, maximum 48 VDC and other specifications.
Output frequency: standard kHz.
Communication interfaces and protocols: Support a variety of communication interfaces and protocols for data exchange and communication with other devices or control systems.
specification
Input/output types: May include digital input, analog input, digital output, and analog output channels.
Programmability: Some modules may be programmable, allowing the user to customize the logic and functionality of the input and output as needed.
Protection circuit and protection function: with protection circuit and protection function, such as photoelectric isolation, overvoltage protection, overcurrent protection, overtemperature protection, etc., to ensure the stable operation of the system.
argument
Number of SSI data bits: A data value that defines how many bits of a data stream, ranging from 1 to 32.
The most important point (MSB) quantity: defines the first value of the bit position of the data in the data bit stream, ranging from 1 to 32.
Number of SSI clock bits: The number of bits set to determine the number of bits per interrogation read from the SSI sensor ranges from 1 to 32 and must be greater than or equal to (the most important bit number + (the number of SSI data bits – 1)), the 24-bit default is suitable for most applications.
specification
Rated input: 0 ~ 20 kaac.
Rated output: 0 ~ 20 madc, 0 ~ 5 vdc, 4 ~ 20 madc.
Accuracy: Level 1.0.
Linear range: 0 ~ 120%.
Isolated voltage: 5000vdc/1 minute.
Auxiliary power supply: +12vdc, ±12vdc, +24vdc.
Operating temperature: -20℃ ~ +60℃.
Early versions are likely to feature the MC68030 enhanced 32-bit microprocessor, which is the first general-purpose microprocessor with on-chip caching and can process instructions and data 20 to 40 percent more efficiently.
Later versions or specific configurations may feature a PowerPC 440 processor with a main frequency of up to 133 MHz and bus bandwidth of up to 1.6 GB/s.
Communication mode: Support RS-232 via RJ45 to PC, RS-485 and other communication modes.
Flow rate: In specific applications, such as particle measurement, the flow rate can reach 80 ml/min.
Counting ability: four channels count at the same time, with strong statistical process control ability.
specification
Channel size: In particle measurement applications, a variety of channel sizes such as 30nm, 50nm, 80nm, 100nm are available.
Display: Built-in color touch display.
Housing: stainless steel construction, in line with NEMA standards.
Analog input: 8-way differential or 16-way single-ended.
Analog output: 4.
Digital I/O: 48 lines.
Update rate: Up to 1.25 MS/s.
Resolution: 16 bits.
Voltage range: ±10v, ±1v, ±100mv.
specification
Operating temperature: -20 ° C to 55 ° C in some descriptions, while 32 ° C to 90 ° C in others. It depends on the application scenario and product configuration.
Power consumption: 14w Max.
Software support: NI LabVIEW, NI-DAQMX.
Size and weight
Size: 13.4 x 5.0 inches (from search results 3), but there is also information that mentions the outline size of 10.6CM x 9.3CM x 2.3CM (product dimensions may not include frames or connectors, etc.).
Early information suggests a 1Ghz Celeron M processor, but subsequent information mentions that it may have a dual-core 1.5GHz processor.
Some information mentions that it has 64MB of memory, while others state that it has 4 GB of Flash and 512 MB of RAM. This may refer to different types of memory or different configurations.
Communication capability:
Serial communication port supporting RS232 and RS485 communication standards.
Support Ethernet/IP, Modbus TCP, PROFINET IO and other communication protocols.
Power Supply:
The supply voltage can be 24 VDC or 120/240 VAC.
specification
Dimensions: 4.42 x 8.03 x 5.11 inches (112.3 x 204 x 129.8 mm).
