System configuration: Flexible, can form a variety of optical fiber networks.
Interface: Logical independent dual bus electrical interface.
Backup function: can realize the backup of electrical interface or single device access dual redundant bus system.
Connection capability: Using point-to-point network, two Profibus DP bus network segments can be connected by optical fiber; Using the optical fiber bus of the double optical port chain network, it can realize the multi-network segment Profibus DP bus connection (200).
Type. PROFIBUS master station module.
Function. Used as a PROFIBUS network scanner to transfer input and output data between PROFIBUS devices and processor data.
Identify. It is recognized as an input/output module and has access to processor memory for data transfer between the processor and the module.
Correspondence. Supports the PROFIBUS DPV0/V1 protocol and can be transmitted via Class 1 or Class 2 DPV1 services.
High stability and reliability: The module can perform well in a variety of industrial environments, with a high degree of stability and reliability, ideal for use in complex industrial application scenarios.
Dimensions: Length 14.7 cm, width 5.15 cm, height 11.4 cm.
Weight: 0.6 kg.
Shipping weight: 1.5 kg.
Functions: Perform adjustment, logic, timing and sequence control together with the connected fieldbus module, perform data acquisition, alarm detection and notification, etc.
Support modules: Support up to 32 Series 200 FBMS, support up to 128 Series 200 FBMS with Fieldbus Expansion Module 100 (FEM100), support up to 64 Series 100 FBM1.
Communication mode: No fieldbus communication module is required, and it is connected to the grid control network through standard fiber 100 Mbps Ethernet.
MITSUBISHI HC-KFS23K-S49 servo motor parameters are as follows:
Brand: MITSUBISHI
Model: HC-KFS23K-S49
Type: Servo motor
Working principle: Servo system is generally composed of servo amplifier and servo motor. The rotor inside the servo motor is a permanent magnet, and the U/V/W three-phase electricity controlled by the servo amplifier forms an electromagnetic field. The rotor rotates under the action of this magnetic field. At the same time, the encoder of the motor comes with a feedback signal to the driver
Type: Electronic controller
Model :873EC JIPFGZ
Manufacturer :Foxboro
Control module: Provides PID, integration, and other types of control depending on configuration
Input/output signal: Support 4-20mA, 0-10v, RTD/TC and other signal types, depending on configuration
Interface: Communication is provided through various protocols, including Foundation Fieldbus, Hart, etc.
Diagnostics: Provides a wide range of diagnostics, including tracking and warning of potential problems
Power supply :24VDC, normal
Type: Electronic temperature regulator
Model: FX-316
Manufacturer :Emerson
Temperature range :-200°C to +600°C, depending on configuration
Control modules :PID, integration, and other types of control, depending on configuration
Input/output signal: 4-20mA, 0-10V, RTD/TC and other signal types, depending on configuration
Interface :HART, Foundation fieldbus and other industry standards, depending on configuration
Type: Electronic controller
Mode :873EC JIPFGZ-5
Manufacturer :Foxboro
Control modules :PID, integration, and other types of control, depending on configuration
Input/output signal: Support 4-20mA, 0-10v, RTD/TC and other signal types, depending on configuration
Interface: Foundation fieldbus, HART and other industry standards, depending on configuration
Diagnostics: Extensive diagnostics, including tracking and warning of potential problems
Power supply :24VDC, normal
Type: Electronic relay
Model :RMV 112D
Manufacturer :DEIF
Voltage range :230 VAC, 50/60 Hz(standard), but other voltages can be supported, depending on configuration
Inputs: Discrete, analog and other types of inputs, depending on configuration
Output signal :1 or 2 open or closed pins, depending on configuration
Additional functions: need to adjust, including delay, lock, etc.
Diagnostic capability: Provides self-diagnosis and status indication to facilitate fault discovery and maintenance
Type: Electronic driver (capacitor)
Mode :1C31227G01
Manufacturer: Westinghouse
Capacitans: Depends on the specific configuration, but is usually in the microfarad (μF) range.
Rated voltage: depends on the configuration, but is usually between 16v and 50v
Design type: Any, depending on configuration
Operating temperature range :-55°C to +105°C, depending on configuration
Input voltage: 24 VDC
Operating temperature: -40°C to +85°C
Memory: 64KB
Input quantity: 16
Output quantity: 16
Specifications:
Size: 17.71×13.77×7.87 cm
Series: Mark VIe
UL Certification: File E157382
CE certification: EN 61000-6-2:2005 and EN 61000-6-4:2007
FCC compliance: Part 15 Subpart B, Class A
Product Description: The device is a high-performance and reliable data acquisition device, which is suitable for various application scenarios requiring high-precision and high-speed data acquisition.
Parameters: Has 16 analog inputs, 2 analog outputs, 8 digital I/O (DIO) lines, and two 24-bit counters/timers. It has a sampling rate of up to 333 kS/s and a resolution of 16 bits.
Size: 6.3 x 3.9 inches, weight 7.2 ounces.
Features: no switch, no jumper design, easy to use. It can be configured and programmed using the NI-DAQ 6052 driver software.
Functions and uses: To achieve accurate and reliable data acquisition, suitable for applications requiring high-speed and high-precision data acquisition, such as industrial automation, test and measurement, scientific research experiments, etc.
