The CB06551 PRD-B040SSIB-63 is often described as a Kollmorgen product, but whether it is a pressure sensor or a servo drive varies slightly in search results. However, we can combine information from both to outline their parameters and specifications.
Purpose:
As a pressure sensor, it is used to monitor and measure the pressure of liquids or gases, and is widely used in industrial automation, hydraulic systems, automotive industry, conditioning equipment, situation monitoring and aerospace and other fields.
As a servo driver, it is commonly used in the field of industrial automation to drive a variety of motors for precise motion control.
Accuracy:
Whether used as a pressure sensor or a servo drive, it has high precision to ensure accurate measurement and control results.
Quick response:
Some descriptions mention that the device has a fast response capability, which can quickly adjust the operating state of the motor or monitor transient pressure changes.
The power input may include nominal 24 VDC, minimum 12 VDC, maximum 48 VDC and other specifications.
It is mentioned that dual power supply redundant input, DC(9-36)V, typical DC24V, power consumption is less than 4W, with DC1500V voltage isolation and reverse protection function.
Input and output:
Supports multiple types of input and output interfaces, including digital input/output (DI/DO), analog input/output (AI/AO), etc.
Voltage and current parameters for digital output and alarm output are specified, such as output current up to 200 mA/ channel.
Relay alarm output, contact capacity: DC48V/1A.
Communication interface:
A variety of communication interfaces and protocols may be supported for data exchange and communication with other devices or control systems.
Provide a variety of communication interfaces, such as serial interface (RS232/RS485), Ethernet interface.
Parameters and specifications
Series: S72402 is the series number of the drive, and NANANA is the custom identification of the drive.
Output frequency: 50Hz/60Hz.
Operating voltage: 24A (Note: the “A” here may be an error or a representation in a particular context, usually the operating voltage is in volts (V)).
Control function: This servo amplifier is specially designed to control the speed, position and torque of the motor.
Digital signal processing: Advanced digital signal processing technology may be employed to achieve precise motion control.
Multi-axis control: Multi-axis control may be supported for controlling multiple motors simultaneously.
Encoder feedback: External encoder feedback may be supported to monitor the motor’s position and speed in real time.
Analog and digital input/output: There may be multiple analog and digital input/output channels for communication and control with other devices.
Rated voltage range: The rated voltage of DS200DCFBG1B may vary depending on the application. For example, it is mentioned that the rated voltage is between 38 and 115 VAC, and it is also mentioned that the power supply voltage is 24 VDC.
Input voltage range: For example, the DS200DCFBG1BJB has an input voltage range of 12-48VDC.
Output voltage and current:
Output voltage range: DS200DCFBG1BGB’s output voltage range is 5 VDC to 24 VDC.
Output current: The output current of the DS200DCFBG1BGB is 2 A/ channel, while the output current of the DS200DCFBG1BJB is up to 10A.
Frequency: The frequency of the board depends on the input voltage, but ranges from 0 to 500 kHz.
Communication protocol: Supports common communication protocols such as Modbus RTU.
Parameters and specifications
Data exchange capability: Up to 10,000 16-bit registers can be used to exchange large amounts of data.
Server connection: Supports three types of server connection, the number of which is 5.
Supported PLC types: PLC2, PLC5, SLC, CLX, CMPLX, MICROLX, etc.
Supported message types: PCCC and CIP.
Client connection: Of the three types of client connections, two are connected and one is not connected.
I/O connections: The number is 2 and the I/O connection size is 248/248.
Maximum RPI time: 5 milliseconds per connection.
Supported CIP services: including 0x4C-CIP data table reading.
Power supply: 24 VDC nominal, allowing range 10 to 36 VDC, allowing positive, negative, GND terminals.
Current load: 24 VDC nominal @ 300 mA, 10 to 36 volts DC at 610 mah Max.
Size and weight
Dimensions: 5.38 x 1.99 x 4.38 inches (or 13.67 x 5.05 x 11.13 cm).
argument
Power Supply: Support 100-120V AC, 220-240V AC, 24V DC and other power supplies.
Redundancy: Dual redundant network /IP and dual redundant power supply.
specification
Type: Duplex field control unit for 19-inch rack mount.
Interface: Supports FIO/IP interconnection.
Size and weight
Size: Single package size is 50X50X50 cm
Weight: The gross weight of each piece is 1.000 kg.
Input voltage range: The input voltage range varies depending on the search results. There are references to 12-48VDC, and there are references to 24VDC.
argument
Current: 100-400A
specification
Type: Digital output module, may also be used as a frequency converter control cabinet logic board or robot main computer board.
Compatibility: Compatible with a variety of industrial automation control systems, easy to connect and communicate with PLC, HMI and other equipment.
trait
High reliability: The use of high-quality materials and manufacturing processes to ensure stable operation in harsh working environments.
Easy to expand: It supports multiple digital output channels and can be expanded according to actual needs to meet the control needs of different scales.
argument
Power supply voltage:
24V DC (mentioned in some materials)
28V DC (another way to say it)
Can operate in 18V to 32V DC range
CPU: 32-bit PowerPC, 800 MHz (mentioned in some materials)
Another mentioned the use of a 600 MHz Intel EP80579 microprocessor
Memory:
2 MB Flash, 1 MB RAM (mentioned in some materials)
4 GB DDR3-1333 SDRAM (another way to say it)
256 MB DDR2 SDRAM (mentioned in another source)
I/O count: 32 analog inputs, 32 analog outputs, 16 digital inputs, 16 digital outputs (mentioned in some materials)
specification
argument
Rated current: 25A
Rated voltage: AC 690V
Contact capacity: AC-1: 25A, AC-3: 15A
Mechanical life: >10 million times
Protection level: IP20
Certification standards: IEC, GB, CB
specification
Product line: ABB’s small contactor series
Applications: motor control, lighting control, heating control, HVAC control and other low-voltage control applications
Size and weight
Dimensions: 70 x 45 x 30 mm (there may be slight differences, such as 74mm height mentioned in [3], but the above dimensions should generally be used)
Weight: 0.2 kg
