argument
Control power supply: 20-60 VDC and 20-48 VAC, frequency 48-62 Hz
Analog output: 4 to 20 mA
specification
Dimensions: 48mm x 96mm x 115mm
Weight: About 1.2kg
series
The product belongs to the GE Multilin relay family, specifically the Multilin 489 generator management relay family
argument
Processor: Up to 1.26 GHz Pentium III processor with 512 Kbyte advanced transfer cache
Memory: A single 144-pin SODIMM is used with a maximum memory capacity of 512 Mbyte PC133 SDRAM
Graphics Adapter: The built-in 815E chipset AGP graphics adapter supports high-resolution graphics and multimedia quality video, and the adapter is complemented by 4 Mbyte external synchronous DRAM cache and a high-bandwidth 64-bit data interface
Video resolution: Screen resolution up to 1,600 x 1,200 x 256 colors (single view mode) is supported
specification
Chipset: Intel 815E chipset with a front end bus rate of 133 MHz
Ethernet Controller: Support for Ethernet LAN with two Intel Ethernet controllers (one 82559 and one inside Intel chipset ICH2) with 10BaseT and 100BaseTX options
System bus: 133 MHz system bus is implemented through the Intel 815E chipset
Operating system support: ows 2000, VxWorks, Solaris, QNX, LynxOS, and Linux are supported
Size and weight
Dimensions: 170mm x 105mm x 32mm
Weight: About 120g
argument
Power supply: DC 24V
Processor: 32-bit ARM processor
Memory: 512 MB RAM
Storage: 2 GB Flash memory
System power supply voltage range: 20 to 32 volts DC
Working output/Field voltage range: 18 to 60 volts DC
specification
Ports: Ethernet port, RS232 port, RS485 port
Size: 100mm x 95mm x 27mm
Digital output function: Provides digital output signals for controlling devices or performing specific actions
Independent Power Pack: An independent power pack with eight outputs of five each, providing greater flexibility and control
Size and weight
Size: 100mm x 95mm x 27mm (L x W x H)
Weight: 1.2KG
argument
Processor: ARM Cortex-A7, clock speed 1GHz
Memory: 512MB DDR3 RAM
Voltage range: 20 to 32V DC
Heat dissipation: 80 watts
Maximum load: 80W
Processor clock: 100 MHz (or higher, depending on description)
Operating temperature: -40℃~ 85℃
Storage temperature: -55℃~ 150℃
specification
Product type: Trusted TMR processor
Interface: Triple redundant intermodule bus, Ethernet, USB, UART, SPI, I2C, GPIO
Overall dimensions: 40mm x 40mm x 4mm (or 30.3cm x 9.3cm x 26.6cm, which may be the dimensions of the case or package)
Power Supply: 3.3V DC (or 240VDC, depending on description)
Size and weight
Size: As mentioned above, depending on whether you are referring to the module itself or the case or packaging.
Weight: 2.94 kg (shipping weight is 4 kg) or 2KG (alternative)
argument
Driving voltage: AC 110V-220V
Adaptive current: below 4.2A
Outer diameter: 86mm
Suitable motor power: 43KW
Rated current: 23mA
specification
Type: Equal Angle constant torque subdivision driver
Series: Mark VI Speedtronic series
Structure: Pull-out
Communication interface: Etherner
Internal function: internal programmable, free to set the motion curve; Excellent multi-axis synchronization and high-precision master-slave following function; Electronic CAM curve can be customized; Supports RS485, CANopen, Profibus DP fieldbus communication
Size and weight
Height: 23mm
Door thickness: 42mm
Weight: 0.8KG
argument
Rated voltage: 220-240V
Rated current: 45A
Frequency: 50/60Hz
Number of poles: 2P
Breaking capacity: 10kA
Rated remaining working current: 30mA
Rated remaining non-working current: 15mA
Rated remaining on/off capacity: 500A
Maximum discharge current: 20kA
Maximum continuous operating voltage: 275V AC
Response time: Less than 25 nanoseconds
specification
Product type: Surge protector
Mounting type: DIN rail
Size and weight
Weight:
2KG (one way of saying)
3.5 kg (another way to say it)
5 kg
argument
Processor: PowerPC processor (some say 1.5 GHz, but others say 1.8 GHz Pentium M processor)
Frequency: 1.5GHz (or 1.8GHz, depending on the model)
Memory capacity: 2GB DDR3 memory (or 64MB user memory, depending on the description)
Memory capacity: 16GB eMMC Flash memory
Voltage: 24VDC
Current: 100-400A (Note that this may refer to the current range associated with the device, not the current requirements of the device itself)
specification
Module type: VME
Dimensions: 8.38 “x 6.69” x 2.17 “(212.8 mm x 170 mm x 55 mm) (or specific dimensions may vary by model)
Weight: 2KG (or 2.0 pounds, about 0.91 kg)
argument
Processor: High-performance processor AMC module with up to 4 GB of ECC memory.
CPU: Currently powered by Intel Core 2 Duo L7400 1.5GHz (may be periodically upgraded to take advantage of new Intel processors).
Flash: Onboard 2 GB NAND flash module.
specification
Type: DCS module, designed for distributed ATCA/MicroTCA processing applications.
Interface: Onboard x8 PCI Express controller with two gigabit Ethernet ports and two SATA ports, optional USB 2.0 port and COM serial port.
Operating temperature range: A range of -10°C to +60°C or 0°C to +50°C is commonly mentioned, but an extended temperature range of -40°C to +55°C is also mentioned.
Humidity range: 5% to 95%RH (non-condensing).
argument
Maximum output power: 20HP
Rated voltage: 380V
Maximum output current: 40A
Control mode: vector control
Operating temperature: standard range -10℃~40℃, but also mentioned -10-70℃(-40~+85℃ wide temperature optional)
specification
Input phases: three phases
Number of output phases: three-phase
Protection level: IP20 (another term is IP30)
Size and weight
Size:
One way of saying it is 330mm x 180mm x 200mm
Another way to say it is 132mm105mm52mm
Parameters and specifications
Product or part type: Analog output module
Absolute accuracy error: +/ -0.2% full scale (77°F/25°C)
Accuracy varies with temperature: full scale 0.004% /°C (typical value)
Loop voltage: 6… 30V DC
Maximum voltage drop: < 30V 25mA
Bus current requirement: 550 MA
Analog output range: 0… 20 mA
Maximum power consumption: 5W
Operating temperature range: -40°C to +80°C (cooling water)
Maximum DC voltage: 500-900 VDC (or 50-400 100-820 VDCDC, range may vary depending on model or application)
Specification: 101623mm
