Current: 100-400A (This range may vary depending on specific application scenarios)
Number of USB ports: 2 ports
Weight: 2KG (according to a transaction record), other claims that the weight is less than 130 (the unit is not clear, may be kg or g)
specification
Brand: ABB
Product type: Ethernet communication interface module
Product ID: 3BSE056767R
Series: ABB 800xA series
Size and weight
Size: The exact size is not directly given, but based on experience with other ABB products, the size may vary depending on the specific model and application scenario.
Input voltage range: The input voltage range of the DS200FGPAG1A may vary depending on the search results. One says 12-48VDC, while another mentions that the device is rated at 220V for use in power measurement and power management applications. For the latter, however, it may refer to the voltage that the DS200FGPAG1A feeds into the grid when it acts as a smart meter, rather than the input voltage of the device itself.
Output voltage: When used as a power module or similar device, the DS200FGPAG1A may have an output voltage of 5VDC and a maximum output current of 10A.
Efficiency: greater than 90%.
Measurement accuracy: 0.2 (when used as a smart meter).
specification
Functions: Smart meters, automation of electrical equipment, etc.
Application: power measurement, power management, DCS industrial control spare parts, etc.
Input voltage: When used as an exciter control module, the parameters of the PCD232A may involve the control range of excitation current and voltage, but the specific values are not directly given. When used as a two-phase driver, its input voltage is 18~60VDC.
Output current: As a two-phase driver, the maximum output current is 6A (peak).
Power supply voltage: A power supply voltage of 1.20V is mentioned, but this may be a parameter for specific application scenarios and is not applicable in all cases.
Current: Some information indicates that the current range is 100-400A, but this may be related to specific application scenarios or product models.
Voltage: Different sources give different voltage ranges, such as 24V DC, 12-48VDC, and 180V. This may be due to differences in different models or application scenarios.
Current: For current, there are references to 100-400A, and there are also references to a maximum of 10A. This may also vary by model.
Efficiency: In certain cases, the efficiency is greater than 90%.
CPU: Some information indicates the use of a 32-bit RISC processor.
specification
Brand: ABB
Type: Controller module
Support customization: No
Size and weight
Dimensions: Specific dimensions are not given directly, but specifications such as 170mm x 105mm x 32mm are mentioned, which may be an approximation or a specific model size.
Weight: Different sources give different weight values, such as 2KG, about 120g, and 1KG.
Scalability: Supports multiple expansion options, including 200-pin DDR SDRAM SODIMM slots and optional soldered on-board memory.
Ports: Provides 1101.10 front panel ports and optional G1 Gigabit Ethernet ports on the front panel.
Support standard: Support VME64x standard, maximum data transfer rate of 80MB/s, and support for 64-bit address bus.
Size and weight
Size: The size of the VMIVME-7807 varies depending on the release information. One is 233 mm x 160 mm x 23 mm, another is 185mm x 122mm, and another is 170mm x 105mm x 32mm. Please note that these sizes may vary by product version or configuration.
Weight: The weight also varies, with one saying 500 grams and another saying about 120 grams.
argument
Processor: Intel® Pentium® M, available at 1.1 GHz, 1.4 GHz, or 1.8 GHz
Level 2 cache: up to 2 Mbyte (1.4 GHz and 1.8 GHz options) and 1 Mbyte (1.1 GHz options)
Memory: Up to 1.5 Gbyte DDR SDRAM
Flash: Up to 2 Gbyte can start CompactFlash
System bus: 400 MHz
specification
Interface type: VME bus interface, used to communicate with other modules or systems
Signal type: Support digital and analog signal processing
Power requirements: Usually require a specific range of DC voltage power supply, such as input voltage range 85~264VAC, output voltage 24VDC
Ethernet ports: 10/100 BaseTX Ethernet port front, 10/100/1000 Base Tx Ethernet port front (non-VITA 31.1 option), 2 Gigabit Ethernet ports (VITA 31.1 optional)
Serial ports: 4 16550 compatible serial ports
USB ports: Four USB 2.0 ports
Graphics support: SVGA and DVI-I graphics support with Intel 855GME
Size and weight
Dimensions: 90 x 110 x 60 mm (or 10 x 7.6 x 1.2 inches)
Weight: Approx. 1.2 kg (or 21.3lb)
argument
Processor: Contains a 96MHz processor
Memory: 32MB of memory
Communication interface: Support Ethernet, serial communication and other communication interfaces
Power supply: The operating voltage may be 180V (but please note that this may be related to the specific application scenario, as different sources give different voltage values)
Power consumption: Specific power consumption values are not directly given, but ABB controllers are typically designed to be energy-efficient
specification
Model: PM865K01 3BSE031151R1
Series: 800xA series controllers from ABB
Color: Green (one way), mixed (another way)
Installation mode: Onsite installation
argument
Input voltage: 24V DC (some information mentions that the input voltage is 24V DC ± 20%)
Input current: up to 5 mA (another message says up to 0.5 A)
Digital input and output: each has 16 channels
Program capacity: 300 (unit unspecified, may be KB or similar)
Data capacity: 200 (unit unspecified, may be KB or similar)
Processing speed: 550μs
Output frequency: 100Hz
Operating temperature: -20°C to +60°C
Communication protocol: Support Modbus and Ethernet /IP
Programming language: IEC 61131-3
specification
Brand: ABB
argument
Number of points: 128-512 (Medium)
Memory capacity and processing speed: There are different memory capacity and processing speed options, but specific values may require reference to the specific product manual or information provided by the manufacturer
Communication options: Equipped with a variety of communication ports, such as RS 232/485 Modbus port, Modbus Plus port, TCP/IP Ethernet port, etc
specification
Brand: Schneider
Model: 140CPU67861
Function: CPU, used in automatic control system
Structure form: integral
Size and weight
Weight: About 1.2kg
