argument
Supply voltage: 24 V DC (+-20%).
Operating voltage: 24 VV (Note: VV here may be miswritten or repeated V, the actual should be 24 V).
Input voltage: 24 VV (again, VV may be a misrepresentation of V).
Memory expansion capacity: 128 MB (GB miswrite or duplicate, should be MB).
System memory: 8 MB (GB miswrite or duplicate, should be MB).
Operating temperature: It varies in different data, there are references to 60 ° C, and there are references to -40 to 100 ° C, which may refer to the operating temperature range under different working environments.
Storage temperature: In the range of -20°C to 75°C (or -10 to 15°F, but usually expressed in Celsius).
specification
Type: Module.
Model: 3BDH000320R0101.
Communication interface: Support Ethernet /IP protocol, provide HDMI interface.
Number of USB ports: 2 ports
Memory card slots: 2.
argument
Rated voltage: The rated voltage mentioned in different data varies. One is 6500 V (for the ABB AC10272001R0101 model), the other is 4500 V (as an asymmetric thyristor IGCT).
Rated current: Depending on the model and application, the rated current also varies. For example, the ABB AC10272001R0101 model is rated at 1000 A, while the asymmetric thyristor IGCT may be rated at 4000 A.
Other electrical parameters: such as switching loss, conduction loss, switching frequency, etc., these parameters depend on the specific model and use.
specification
Size: According to the data, the size of ABB AC10272001R0101 model is 300 mm in length, 250 mm in width and 150 mm in height. The dimensions mentioned in other materials may vary, such as a level 1 package length of 439 mm, a height of 41 mm (may be related to packaging or different models).
Weight: The ABB AC10272001R0101 model weighs 15 kg, while the weight mentioned in other information may be lighter, such as 2.9 kg
argument
Communication protocol: Support PROFINET IO communication protocol, which is an Ethernet communication protocol widely used in industrial automation.
Communication speed: CH1 communication speed is supported and can be selected between 10 Mbps and 100 Mbps, these speeds are defined in the IEEE 802.3u 10/100 Base-Tx standard.
Power and power consumption: 24VDC power is received through the CEX bus and its current consumption is up to 250 mA. Under typical operating conditions, the power consumption is 3.8W and the maximum power consumption is 6W.
specification
Part number: 3BSE056797R1, there are also references to 3BSE056767R1.
Connector: RJ-45 female (8 pins).
Hot swap: Supported.
Size and weight
Dimensions: 59 x 185 x 127.5 mm (2.9 x 7.3 x 5.0 inches). However, in another search result, the size is mentioned as 100mm x 50mm x 20mm, which may refer to the size under different models or configurations, or there is an information error.
Weight: 500g (700g with packaging), there are also references to the weight of 2KG, which may be due to differences in packaging or configuration.
argument
Product Number: 3BSE076940R1
Clock frequency: 67 Mhz
Memory: 32 MB RAM, of which 23.521 MB is available for applications
Processor type: MPC866
Power Supply: 24V DC (19.2-30V DC)
specification
Functions: data acquisition, arithmetic processing, real-time monitoring, control and adjustment
Performance: 1000 Boolean operation 0.18 ms
Scalability: Supports CPU redundancy for higher availability (CPU, CEX bus, communication interface, and S800 I/O)
Size and weight
Size: Approximately 18.6 cm x 11.9 cm x 13.5 cm (H x W x D)
Weight: 1.1 kg (net weight of product), shipping weight is 2 kg
argument
Power supply voltage: Usually 24V DC or 28V DC (slightly different in different data)
CPU: 32-bit PowerPC, up to 800 MHz (600 MHz Intel EP80579 microprocessor mentioned in some sources)
Memory: 4 GB DDR3-1333 SDRAM (some sources indicate 2 MB Flash and 1 MB RAM)
I/O count: 32 analog inputs, 32 analog outputs, 16 digital inputs, 16 digital outputs (mentioned only in some sources)
specification
Ethernet ports: There are five Ethernet ports on the front panel of the module and one Ethernet port dedicated to Predix connectivity on the bottom panel
USB Port: The front panel of the module has a USB port for specific functions such as configuration recovery
COM port: Serial communication port with RJ-45 connector, supporting 115200 bits per second (bit/s)
Other ports: include the Predix connection port, microSD port (not supported), and display port (disabled after startup)
Size and weight
Size: The size mentioned in different data is slightly different. One is 8.03 inches in height, 5.99 inches in depth, and 2.17 inches in width; Another way to put it is 6.4 inches x 8.1 inches x 1.4 inches.
Weight: Approximately 0.82 kg
argument
Component number: IS420UCSBH4A
Manufacturer: General Electric (GE)
Country of Manufacture: USA
Microprocessor: 1066 MHz Intel EP80579
Memory: 256 MB DDR2 SDRAM
Operating system: QNX Neutrino (Real-time multitasking operating system)
specification
Function: UCSB controller for gas turbine control systems
Application execution: By a separate computer called a UCSB controller
Communication interface: The IONet interface on board supports communication with other I/O packets
series
It is part of the General Electric (GE) Mark VIe series.
argument
Model: CIMR-HB4A0370ABC
Brand: YASKAWA
Series: H1000
Suitable motor power: 160kW
Rated voltage: three-phase AC400V
Supply voltage: Low voltage
Number of power phases: three phases
Maximum output voltage: three-phase 380~480V (corresponding to input voltage)
Maximum output frequency: 400Hz (can be changed by parameters)
Allowable voltage fluctuation: -15~10%
Allowed frequency fluctuation: ±5%
Input voltage range: According to different data, there are 12-48VDC and 24VDC two versions. Please note that this may vary depending on the product model or configuration.
Output voltage: 5VDC or 24VDC.
Output current: Maximum 10A or maximum 15A.
Efficiency: greater than 90% (this parameter may not apply directly to all digital input modules, but gives a possible energy efficiency level for the module).
Operating temperature: -20°C to +50°C or -25°C to +70°C.
Storage temperature: -40°C to +70°C.
Ambient humidity: 5% to 95% relative humidity (no condensation).
specification
Brand: GE (General Electric).
Product type: Digital input module.
Function: Receive and process digital input signals from various sensors and convert them into signals that the system can recognize and process.
Ambient humidity: 5% to 95% relative humidity (no condensation)
specification
Brand: GE (General Electric)
Product Type: Printed Circuit Board (PCB)
Functions: Provides electronic connectivity and circuit support to connect various electronic components (such as chips, sensors, switches, etc.) to perform specific control and monitoring tasks
