Function: As a controller or processor unit, responsible for data processing, control logic implementation and communication functions.
Operating voltage:
24Vdc is mentioned, but it may vary depending on the specific application scenario.
It is also stated that the operating voltage range may include 180V or higher, but please note that this may not be consistent with the specific model or application scenario of the PM866A 3BSE076359, as 24Vdc is generally more common in industrial automation control components.
Current: A current range of 100-400A is mentioned in [1], but this may refer to the current range of the entire system or device to which the component is connected, rather than the component itself.
Based on the PowerPC architecture, one source says it uses a Freescale MPC7477 PowerPC processor, but another source says it uses a PowerPC 750 processor. Either way, it operates at 1 GHz.
Memory: Up to 2 GB of DDR2 memory, but there are also data showing 1 GB of DDR2 SDRAM.
Storage space: Includes 256 MB Flash and 16 GB SATA hard disk.
Communication capability: Support communication with other GE Fanuc series PLC or DCS systems via point-to-point connection for easy data transmission and control.
Power supply voltage: Depending on the product specifications, a variety of power supply voltage ranges may be supported, the specific value needs to be further checked.
Working environment temperature: The ambient temperature required by PLC is usually 0~55°C. When installing it, avoid placing it under parts that generate more heat, and ensure that there is sufficient ventilation and heat dissipation space.
Working environment humidity: To ensure the insulation performance of the PLC, the relative humidity of the air should be less than 85% (no condensation).
Vibration: Keep away from strong vibration sources to prevent frequent or continuous vibration with a frequency of 10~55Hz.
Gas environment: The air should be free of corrosive and flammable gases, such as hydrogen chloride and hydrogen sulfide. For dusty or corrosive gas environments, it is recommended to install the PLC in a well-sealed control room or control cabinet.
Operating voltage: Depending on the search results, the operating voltage may be 24Vdc/120Vac, but please note that the specific voltage may vary by product version or application environment.
Current: In some applications, the current range may be 100-400A, but this may refer to the current range of the entire system or device to which the signal processing board is connected, rather than the current specification of the signal processing board itself.
Operating ambient temperature: -40 to 100 ° C, which indicates that the signal processing board is suitable for a wide range of temperature environments.
Operating system: Usually compatible with PLC systems.
Output frequency: In certain cases, it may be mentioned that the output frequency is 60Hz or 56/63Hz,
specification
Working environment: Temperature range is 0~50℃, relative humidity ≤80%RH. It is also said that the working environment is -10 ~ 50℃, 20% ~ 90% no condensation.
Implementation standard: QB/441600 17 079-2001.
Accuracy: 0.2%, 0.5%.
Job stability: annual change < 0.2%.
Power frequency withstand voltage: AC2.0kV/min.1mA.
Insulation resistance: ≥ 20MΩ (DC500V).
Impulse voltage: 5kV(peak), 1.2/50μS.
Response time: ≤350ms.
Operating temperature: The commercial version has an operating temperature range of 0° to 55°C, while the extended temperature version has an operating temperature range of -20° to 71°C.
Parameters and specifications
Model: SCXI-1193
Manufacturer: National Instruments (NI)
Part number: 776572-93
Number of channels: 32
Frequency range: DC to over 500MHz
Scan rate: maximum 100 operations/second
Relay life: mechanical life of 50 million cycles, electrical life of 300,000 cycles (30V 0.3A DC resistance)
Trigger characteristics: Input trigger comes from SCXI trigger line 0 to 7, front panel, rear connector; Minimum pulse width 150 nanoseconds; The output trigger destination is SCXI trigger line 0 to 7, front panel, rear connector; Programmable pulse width (1μs to 62μs)
Physical properties: the type of relay is electromechanical latching relay; Contact materials are silver, palladium and gold
Size and weight
Dimensions: 1.2 x 6.8 x 7.8 inches (or 3.0 x 17.3 x 19.8 cm)
Weight: 2 ounces
