Grid view List view

Showing 6301–6312 of 19460 results

FBM04

¥3,625.00

Parameters and specifications:

Model and Series: The FBM04 is a product under the FOXBORO brand, which belongs to the module or converter family in the field of industrial automation control.
Function: The FBM04 is a photoelectric converter that supports the function of PROFIbus-DP to optical fiber, and realizes the conversion of electrical signals from the profibus dp bus to optical fiber signals.
Interface: The FBM04 has profibus interfaces, two groups of optical fiber interfaces and two groups of dp bus interfaces.

Series:

The FBM04 belongs to the FBM family and is a module or converter commonly used in Foxboro industrial automation control systems.

FBM201

¥4,025.00

Parameters and specifications:

Model: FBM201.
Operating voltage: Usually 12 to 30 volts direct current (DC).
Operating temperature: -40 ℃ to 85 ℃.
Communication interface: RS485.
Input module: has 8 digital input channels, conversion rate of 10 ms, accuracy of 16 bits binary.
Output signal: For the analog signal converter version, the output signal ranges from 4 to 20mA and can be adjusted as needed.

F650BABF2G0LOSHE

¥3,415.00

Parameters and specifications:

Operating voltage: 24~ 48V DC.
Output frequency: 40~65Hz.
Features: With feeder monitoring, fault detection, protection function, communication interface, intelligent management and other functions.

Size and weight:

Size: Standard size, specifically 25*65*32mm.
Weight: About 4.65 kg.

45C992

¥3,514.00

Parameters and specifications:

Device type: Relay module.
Rated power: Depends on the model, but is usually 992 kW.
Voltage range: Usually suitable for high voltage systems.
Control mode: includes automatic, manual and test modes.
Interface type: Modules are typically equipped with analog and digital input/output interfaces, as well as communication interfaces (such as RS-485 or Ethernet).

KJ3002X1-BF1 12P1732X042

¥3,652.00

Parameters and specifications:

Type: Eddy current sensor, used to measure the distance between a metal object and the sensor or material properties.
Working principle: Based on the principle of electromagnetic induction, when the sensor is close to the metal object, it will induce eddy currents in the object, which will affect the electromagnetic field of the sensor, thereby changing the output voltage or resistance value of the sensor.

RER133

¥3,526.00

Parameters and specifications:

Communication interface: Since ABB’s SPACOM100/REF500 series of smart protection devices have a special communication interface, RER133 may also have a matching communication interface or adapter to connect to the monitoring system.
I/O modules: RER133 S800 I/O modules are distributed, highly integrated and modular IO family products with specific functions and application scenarios.

 

IC695ALG708

¥4,025.00

Parameters and specifications:

Voltage range: The module supports voltage ranges from 0 to +10 volts or -10 to +10 volts.
Current range: The current range is 0 to 20 MA or 4 to 20 mA.
Backplane current: At 375.3 volts, the backplane requires a rated current of 3 mA.
Isolation voltage: The isolation voltage of the IC695ALG708 module is 2550 volts DC and the duration is 850 seconds.
Output load: The maximum output load is 7 ohms.

PFEA112-20 3BSE050091R20

¥3,415.00

Parameters and specifications:

Purpose: It can be used as a communication module for ABB ACS880 Variable frequency drive (VFD), or as a tension controller.
Hardware Basics: A single-board computer based on an ARM®Cortex®-A8 processor with 2GB RAM and 32GB flash memory.
Communication interface: Provides a variety of I/O options, including CANopen, EtherCAT, Profibus-DP and PROFINET, support Modbus TCP/IP, OPC UA and BACnet and other communication protocols.
Tension control: The ability to monitor and adjust tension sensors or tension measurement systems to ensure that the required tension levels are maintained during production.

PFEA112-20 3BSE030369R0020

¥3,526.00

Parameters and characteristics:

Model: abb pfe112-20 3bse030369r0020.
Voltage control: ensure that the tension remains within a certain value when reprocessing the material.
Multichannel control: allows you to control several traction devices or multiple extraction systems at the same time.
Communication interface: it is equipped with various communication interfaces such as Ethernet, modbus, profibus, etc., which allows data exchange and integration with other automated devices, control systems or monitoring systems.

Size and weight:

Weight: approx. 2 kg.

FBM232 P0926GW

¥3,625.00

Parameters and specifications:

Wireless protocol: Supports Wi-Fi and Bluetooth.
Frequency range: 2.4 GHz.
Operating temperature: -40℃~85℃.
Input voltage: 3.3V.
Data rate: up to 150mbps.
Security: Supports security protocols such as WPA2 and AES-CCMP.
Communication interface: Support Ethernet communication, RS-485 and other interfaces, can achieve seamless connection with other devices or systems.

A6220 9199-00009

¥3,526.00

‌ Specifications and parameters ‌

‌ Model ‌ : A6220 9199-00009
‌ brand ‌ : Emerson (presumably, based on the Emerson A6220 that appears in the article)

‌ function ‌

‌ Application scenarios ‌ : Due to limited information, the specific application scenarios and functions of A6220 9199-00009 cannot be determined, but according to the brand and product line, it may be related to industrial automation and process control.
‌6220 Bearing information (not A6220 9199-00009, but may be relevant) ‌

VMIVME-2540-000

¥3,526.00

‌ Specifications and parameters ‌

‌ Input current ‌ : 500mA
‌ Output voltage ‌ : 24VDC
‌ Output power ‌ : 360W
‌ Input voltage range ‌ : 85~264VAC
‌ Maximum output current ‌ : 15A
‌ Operating temperature range ‌ : -25~70℃

‌ Dimensions and weight ‌

‌ Dimensions ‌ : 115mm x 48mm x 150mm
‌ Weight ‌ : approx. 1.2kg