Model : PFTL101B 2.0KN
flash : 6 MB
Input voltage : -0.6 V DC
Operating temperature range : -20°C to +50°C
Storage temperature range : -40°C to +70°C
Diagnostic bus : 2 Mbps HDLC
Weight : about 120g
Dimensions : 170mm x 105mm x 32mm
Motor power: range 0.12~ 200kW.
Torque range: 85~18000 nm.
Ratio range: 5~28000.
Input speed range: 750 to 3000 rpm.
Output speed range: 0.05~500 rpm.
Installation position: Multiple installation positions from M1 to M6 are available.
Ambient temperature range: -20°C to +40°C.
Rated voltage: 380 V.
Rated frequency: 50 Hz.
Rated current: 1.5~350 A.
Power supply function : The UES815S power module can be mounted directly on the printed circuit board, and provides power for digital or analog loads such as ASIC, DSP, microprocessor, memory, FPGA
protective function : the module has built-in overcurrent, overheat, short circuit and other protective functions to ensure the safety of electrical equipment
modular design : easy to install, repair and replace
High reliability : well designed for stable operation in harsh environments
widely used : widely used in switching equipment, access equipment, mobile communication, microwave communication, optical transmission, router and other communication fields as well as automotive electronics, aerospace and other fields
Number of channels: 32 channels.
Switch type: SPST (single pole single throw).
Frequency range: DC to 3GHz or possibly up to 500MHz.
Maximum switching speed: 100 times/SEC.
Rated current: 1A.
Maximum power: 15W.
Operating temperature: recommended from 0°C to 50°C, storage from -20°C to 70°C, non-condensing humidity from 5% to 85%.
Dimensions: 1.2 x 6.8 x 7.8 inches (30 x 173 x 198 mm).
Model and specification: PFTL101A 1.0kN 3BSE004166R1, where “1.0KN” means its measuring range is 1.0KN.
Usage: Usually used to measure and monitor the force or pressure of an object, especially suitable for tension control and measurement in the industrial field.
High measurement accuracy: With high measurement accuracy, it can provide accurate force or pressure measurement results.
Various output signals: The sensor usually uses analog signal output, such as 4-20mA signal or 0-10V signal, as well as digital signal output, such as RS485 communication interface.
Model: 5SHX2645L0004.
Product Series: ACS 6000.
Voltage: 6kV.
Current: 2500A.
Power: 15MW.
Switching frequency: 2kHz.
Efficiency: >98%.
Cooling method: water cooling.
Dimensions: 120mm x 90mm x 70mm.
Weight: 2.6 kg.
Operating voltage: 5V.
Interface type: VME.
Memory capacity: 256MB.
Processor: Some sources mention a 1.33GHz Intel Atom Z520PT processor
Size: 6U (height)
Weight: 0.5kg.
Compressive strength: input/output/communication ≥1000V.AC, for 1 minute.
Insulation impedance: input/output/communication ≥100MΩ.
Operating temperature: 0 ~ 50℃.
Relative humidity: ≤85%RH.
Size: Based on the search results, there are two possible size descriptions. One is 22.5110115mm (width, height and depth), and the other is 365874mm.
Weight: There are two different descriptions of weight. One is about 150 grams and the other is 1.85 kilograms.
Model: 3HAC025527-004.
Brand: ABB.
Voltage: 24V.
Current: 100-400A.
Origin: Switzerland.
Weight: 2KG.
Model: 5SHX2645L0004.
Voltage: 6kV.
Current: 2500A.
Power: 15MW.
Switching frequency: 2kHz.
Efficiency: >98%.
Cooling method: water cooling.
Weight: 2.6 kg.
Model: FU20-10-T1-NPT
Measurement principle: Based on pH glass electrode and silver chloride reference system, as well as platinum electrode and Pt1000 temperature sensor
Measuring range: pH 0 ~ 14, ORP ±1500mV, temperature -10 ~ 105℃
Measuring pressure: 0 ~ 1MPa
Electrical conductivity: >50μS/cm
Flow rate: 0 ~ 2m/S
Cable length: 10m (suffix code -10)
Temperature element: PT100
Model: ABB PP846 3BSE042238R1.
Touch screen Type: Resistive, users can interact with the touch screen to perform control, monitoring and other operations.
Display: 10.4 inches, resolution 640 x 480 pixels, display color 256 colors, display brightness 200 cd/m², display contrast 200:1.
Processor: 266 MHz ARM9.
Memory: 32MB RAM and 32MB flash.
Communication interface: including one RS-232 serial port and one RS-485 serial port, supporting Modbus RTU/TCP, ABB CS31, ABB Advant, ABB Master and other protocols.
Power input: 24VDC.
Power consumption: 18W.
Operating temperature: 0℃ to 50℃.