Grid view List view

Showing 6157–6168 of 19460 results

F8627X

¥3,526.00

‌ Specifications and functions ‌ :

‌ ‌ : F8627X is a controller processor module which may belong to a certain brand of automation control system component ‌
‌ function ‌ : used for industrial automation control, to achieve input and output drive and power management functions ‌

‌ Key parameters ‌ :

‌ Electrical parameters ‌ : may include working voltage, current, power, etc. For details, refer to the product specification ‌
‌ Performance parameters ‌ : such as processing speed, response time, accuracy, etc., also need to be determined according to the product manual ‌

SYN5202

¥3,652.00

‌ Specifications and functions ‌ :

‌ functions ‌ : SYN5202 is an automatic quasi-synchronous device of ABB brand, which is used for parallel operation of generators in power system to ensure that generators can be quickly pulled into synchronous operation with minimum impulse current to ensure the safety of power grid and units ‌
‌ quasi-synchronous mode ‌ : adjust the generator speed and excitation device to make the generator voltage and frequency close to the system value, and turn on the circuit breaker ‌ when the phase Angle difference is zero

DS200DCFBG1BGB

¥3,252.00

‌ Specifications and parameters ‌ :

‌ functions ‌ : DC feedback power supply board for industrial equipment and systems to provide stable DC power ‌
‌ Input voltage ‌ : 38 to 115 VAC, which can be supplied directly to ‌ via the control power transformer
‌ Output voltage and current ‌ : Provide different voltage and current output according to requirements to meet the power requirements of each device in the system ‌
‌ Frequency range ‌ : 0 to 500 kHz, depending on input voltage ‌
‌ protection features ‌ : with overload, overheat, short circuit and other multiple protection functions ‌

DS200DCFBG1BNC

¥2,652.00

‌ parameter ‌ :

Bandwidth: 150MHz
Rising time: ≤2.3nS
Sampling rate range: 1GS/s, equivalent to 50GS/s
Vertical deflection coefficient: 2mV/div ~ 5V/div
Record length: 2 x 512 k
Scanning time base: 2ns~50s/div
Trigger type: edge, pulse width, video, alternate
Ports: USB Device, USB Host, and Pass/Fail are standard configurations, and LAN is optional

G122-829-001

¥2,526.00

Parameters and specifications:

Usage: MOOG amplifier G122-829-001 is a high frequency power amplifier, used in the final stage of the transmitter, the role is to amplify the high frequency modulated wave signal to meet the transmission power requirements.
Effect: The amplified signal is radiated into space through the antenna to ensure that the receiver in a certain area can receive a satisfactory signal level, and does not interfere with the communication of adjacent channels.

Features:

As a high-frequency power amplifier, the G122-829-001 has the ability to amplify high-frequency signals to meet transmission power requirements.

VE4033S2B1

¥3,541.00

Parameters and Specifications:

Voltage: 24V DC
Current Range: 100-400A
Weight: 2KG
Series: Emerson VE Series Controller
Dimensions:
Exact dimensions are not provided in the search results.

Features:

Redundancy: VE4033S2B1 typically has multiple input channels, with each channel featuring redundant input functionality. This ensures that the system can automatically switch to a backup input signal if one fails
High Reliability: Thanks to its redundant input capability, the analog input card provides increased system reliability and fault tolerance

PXI-7344

¥2,541.00

Parameters and specifications:

Purpose: Designed for motion control and servo drive applications with excellent accuracy and real-time control.
Servo shaft channels: Multiple independent servo shaft channels are available, each of which can be configured and controlled independently for complex motion control applications.
Control function: Support closed-loop control, real-time adjustment of the system through feedback signals to ensure the stability and accuracy of the control system.
Update frequency: With enhanced PID/PIVff servo update at speeds up to 62 μs per axis.

FS-SDOL-0424

¥3,652.00

Parameters and specifications:

Output channels: With four 24 Vdc, 1 A loop monitoring output channels, it can drive loads up to 24 W and has A maximum module load of 3.6 A.
Load type: These loads can be resistive or inductive.
Features: Support for interrupting actions in routines and error handlers, which can temporarily interrupt an ongoing motion and start a new motion independent of the first one. This is particularly useful in robotic applications where, for example, in the event of a welding failure, the welding motion in progress can be stored and the robot can be ordered to the cleaning position in order to clean the nozzle.

140ACI04000

¥2,541.00

Parameters:

Input quantity/Power consumption: 16 channels /5W
Address Requirement: 17 Enter a word
Analog input resolution:
0 to 4095 Counts 4 to 20mA
0 to 25000 The count ranges from 0 to 25mA
0 to 20000 The value ranges from 0 to 20mA
0 to 16000 Counting 4 to 20mA
Absolute maximum input: 30mA
Input impedance: 250 ohms
Absolute accuracy error: +/-0.125% full scale

CC-PDIL01

¥2,562.00

Parameters and specifications:

Manufacturer: Honeywell.
Product type: Digital input 24VDC.
Rated voltage: 24VDC.
Logic level: Logic 1 is 15VDC or 2.5mA (minimum), logic 0 is 5VDC or 1mA (maximum).
Input current: From the load voltage L+(no load) Max 90mA, from the backplane bus 5VDC Max 130mA.
Number of channels: 32 digital input channels.
Isolation features: photoelectric isolation (field power and logic power), 500VAC, 1 minute isolation group 4.
Allowable operating temperature: 55°C.
Cable length: 500m with shielding, 300m without shielding.

369-HI-R-M-0-0-0-E

¥6,250.00

Parameters and specifications

Input voltage range: Control power range is 50-300 VDC and 60-264 VAC.
Input current: Phase current inputs are 1 A and 5 A.
Number of inputs/outputs: The number of digital/switching inputs is 6, optically isolated.
Ambient humidity: non-condensing with a maximum ambient humidity of 95%.
Dimensions: Height 11.5 inches x width 5.5 inches x length 8.5 inches (approx.).
Weight: 8 pounds.
Power: Input power is 110-250 volts DC or 100-240 volts AC.

140CPU42402

¥3,526.00

Parameters and specifications:

Series: Quantum 140 series.
Voltage: 24V.
Current: 100-400A.
Operation mode: remote control.
Applicable motor: servo motor.
Communication: Supports multiple communication protocols and interfaces, such as USB-B.

Size and weight:

Weight: about 2KG