Processing speed: such as 360μs or 100μs.
Program capacity: such as 50 or 6M.
Data capacity: 50 or 20 Mbit/s.
I/O points: such as 54 or 64.
Current: 5A.
specification
Structure form: integral.
Installation mode: Onsite installation.
LD instruction processor: There are soft PLC and hard PLC two different versions.
Size and weight
Size: Different sources give different size information. One version is 25-255mm, another version is 121212, and another version is 10*20mm.
Weight: such as 1-15kg or 2.5kg.
Parameters and specifications
Size: The overall size is 132mm105mm52mm.
Weight: The net weight is 800g, but different weight values may be given in some descriptions, such as 0.3kg, which may be due to differences in information from different sources or product models.
Series: C300 series.
Operating temperature: -10-70℃ (optional wide temperature range of -40~+85℃).
Relative humidity: ≤90% (no condensation).
Storage temperature: -40 ~ 80℃.
Power supply: Dual power supply redundant input, DC(9-36)V, typical DC24V, power consumption less than 4W.
Voltage isolation: with DC1500V voltage isolation and reverse protection function.
Relay alarm output: fiber link fault and power supply fault alarm output, contact capacity: DC48V/1A.
Speed response frequency: A speed response frequency of 1MS is mentioned in some information, but this information may vary depending on the specific application.
Safety Interlock Logic: The module might execute safety interlock logic to prevent unsafe operation of the controlled process. This could involve ensuring specific conditions are met before allowing certain actions or stopping equipment in case of a safety hazard.
Emergency Shutdown Systems: It could play a role in initiating emergency shutdown procedures if critical parameters deviate from safe operating ranges.
Safety Input/Output (I/O): The IS420UCSBS1A might have dedicated safety I/O channels for interfacing with safety sensors and actuators. Safety sensors would provide input on potentially hazardous conditions, and safety actuators could take corrective actions (e.g., stopping machinery) based on the module’s logic.
Operating temperature: According to different data, the operating temperature range is different. One source indicates -15 ° C to 60 ° C, while the other indicates -25 ° C to +70 ° C.
