The S72402-NANANA is an interface board for Kollmorgen AKD series servo drives
Power supply: 24 V DC
Operating temperature range: -40°C to +85°C
Interface type: Supports EtherCAT communication
Protection grade: IP65, indicates that it has good dustproof and waterproof performance
- Power supply voltage : AC/DC 100V-240V
- monitoring range : can monitor a full range of electrical parameters, including current, voltage, power, frequency and so on
- communication interface : supports Ethernet, optical fiber, serial port and other communication modes, including RS-485
- Communication rate : For example, the RS-485 interface can reach 9600bps
- size : According to the search results, has two different size descriptions, is 132mm105mm52mm and is 120mm×80mm×40mm
Clock frequency: 266 MHz
Memory capacity:
Internal RAM: 1024 kB and 512 kB are dedicated to data
Scalable file storage capacity (via PCMCIA card) : 8 MB
Expanders program storage capacity (via PCMCIA card) : 7168 kB
I/O features:
Dedicated I/O includes counters, accurate timestamps, high-speed interrupt outputs, and serial links
Supports multiple I/O templates and extension options
High precision and long life
Wide frequency range
Wide operating temperature range
Strong anti-interference ability
Easy to install
High reliability
Accuracy: up to ±0.5%
Frequency range: DC to 100kHz
Operating temperature range: -40℃ to +85℃
Rated current: 20A
Size:
150mm x 50mm x 30mm (common)
170mm x 105mm x 32mm (specific version)
Weight:
0.5kg (common)
Approx. 120g (specific version)
2KG (specific version)
Model: VE3008
Input voltage:
AC220V (Common)
12-48VDC (specific version)
30g
Other versions may be heavier, such as 2KG
Insulation resistance: 100MΩ, indicating that it has good insulation performance.
Compressive strength: AC2.5kV/1min, indicating that it can still maintain stability and safety under high voltage.
Rated current: Depending on the specific application scenario, it may vary, but some applications mention 20A
Accuracy: ±0.5%, indicating that it has high accuracy in current measurement.
Frequency range: DC-100kHz, suitable for a wide range of frequencies.
Input signal: -10 Vdc to +10 Vdc
Shaft and sensor power supplies: -24 Vdc
Power consumption: 7.7 Watts (some versions may vary, such as 5W)
Data transfer rate: 9600 baud
Delay time: ≤1 ms
Working temperature:
25 ° C (normal)
-40°C to +85°C (high performance version)
Interface: VMEbus
Number of channels:
Number of analog input channels: 16
Number of analog output channels: 16 bits
Digital I/O: 32 lines
Resolution:
Analog input/output resolution: 16 bits
ADC sampling rate: 500ksps
DAC output rate: 1Msps
Operating temperature: 0 ~ 60℃
Storage temperature: -40℃~ 70℃
Humidity: 5% ~ 95%, no condensation
Power Supply: The 120/230V AC version provides an internal 24VDC power supply to protect against short circuits and overloads
Dimensions: 5.37 x 3.5 x 1.25 inches (136.5 x 88.9 x 31.8 mm)
Weight:
0.39kg (one way to say it)
4.40 pounds
Processor: The PM861AK01 uses a high-performance 32-bit microprocessor that is also part of ABB’s AC 800M control system as the core processor unit of the system
Memory: There is 2M Flash writable memory and 2M RAM on the board for storing user programs, data and control programs
Interface: 100Pin high-density shielded cable is used with external interface, and can be converted into D-type plug direct connection mode through interconnection module. In addition, it also supports Ethernet, serial port, CAN bus and other interfaces
Power supply: DC 24V2, other sources mention DC9-36V wide redundant dual power supply.
Size:
220 mm x 176 mm x 89 mm (one way of saying)
170mm x 70mm x 85mm (for DC 12V version only)
112mm×70mm×123mm (another possibility)
100mm x 50mm x 25mm (another way of saying, only for DC 12V version)
Weight:
150g (for DC 12V version only)
100g
Processor:
The initial version is likely to be powered by a Pentium® III processor up to 1.26 GHz with 512 Kbyte advanced transfer cache
The other configuration uses a Freescale PowerPC 7447A processor at 1.267GHz
Memory:
The initial release supports PC133 SDRAM of up to 512 Mbyte, achieved through a single 144-pin SODIMM
The other configuration supports up to 4GB DDR2 SDRAM
Storage:
The initial version has a built-in 815E chipset AGP graphics adapter, supplemented by 4 Mbyte external synchronous DRAM cache
Supports the CompactFlash Type II card as the storage medium