Rated voltage: may be rated for 220V, 230/400V or 24V depending on the description
Rated current: may be rated for 5A, 16A, or 100-400A depending on the description
Resistance: 5 euros ( mentioned only in specific descriptions) 1.
Dimensions: 74 x 52 x 35 mm
Weight: 2KG
The REF615E-G typically supports 24V voltage 12, to accommodate a variety of industry standards.
The measurement range may vary according to the specific application, refers to 0~5000ppm2, may also involve the measurement of electric parameters such as current, voltage 4.
Supports a variety of communication protocols, such as Modbus, Profibus, for data interaction and remote monitor45.
The overall size is usually 120mm×80mm×40mm2, compact design, save installation space.
Weighs about 2KG3, is light and easy to carry.
CPU performance : uses a 32-bit RISC processor. For specific performance data, see the PACSystems CPU Reference manual
memory : program store up to 64 MB of battery-supported memory and 64 MB of non-volatile flash user memory
Power requirements : +3.3 volts DC 1.0 amp nominal value, +5 volts DC 1.2 amp nominal value
operating temperature : The operating temperature is -20°C to +50°C ( storage temperature -40°C to +70°C) , it is also noted that the operating temperature is 0 to 60 °C
dimensions : One source indicates a size of 170mm x 105mm x 32mm2, another gives a size of 40 x 40 x 30
weight : about 120g2, some information shows that 2.1kg4 or 2 kg
Data output: supports ModBus TCP/IP and ModBus RTU ( serial) , ModBus RTU data rate is 19.2 kbaud, data bit is 8, parity is even, stop bit is
Default IP address: 192.168.255.1, Subnet mask: 255.255.255.0
ModBus Ethernet interface: RJ 45 port, 10BaseT supported
Although the exact dimensions ( L x W x H) are not given directly, is mentioned as a 3U plug-in module with a slot 1, reduces the cabinet space requirement by half compared with a traditional 6U card
Input voltage: 48V DC
Output voltage: 24V DC
Output current: 22A ( may vary according to specific model)
Rated power: 528W
Efficiency: >89%
Ripple and noise: <2mVpp
Operating temperature: -25°C to +70°C
Storage temperature: -40°C to +85°C
Humidity: 5% to 95% ( non-condensing)
Input voltage range: 10.5-30 volts ( valid)
Output voltage range: 0-10 volts ( valid value)
Maximum output current: 24 amps
Maximum frequency: 2500 Hz
Accuracy: ±1%
Working voltage: 24Vdc/120Vac
Supported system: PLC/DCS system
Supports a variety of communication protocols, such as TriStation, Modbus, TCP/IP and so on
The Q173CPU is part of Mitsubishi’s Q Series motion controllers and uses a 64-bit RISC processor that reduces run times to 0.88ms, improves CAM speed and reduces operational response times. A single Q173CPU can control up to 32 axes for complex motion control needs.
There are different accounts of the weight of the Q173CPU. One says 0.22kg, another says 2kg, and still another says 1kg. The exact weight may vary depending on the product model or configuration.
Processor: MPC7457 PowerPC, running at 1.267 GHz.
Memory: supports up to 1GB of on-board DDR ECC memory.
VMEbus protocol: supports 2eSST protocol, provides 320MB/s transmission rate.
Storage: with 128MB flash.
Cache: includes 32K/32K L1 cache and 512K L2 cache, and 2MB of NVRAM.
Scalability: supports two 33/66/100 MHz PMC-X sites, allows the addition of industry-standard dedicated modules.
- Number of ports : 24 Gigabit Ethernet ports and four 10-Gigabit Ethernet ports.
- Exchange capacity : 128Gbps.
- Forwarding rate : 95Mpps.
- cache : 12MB.
- Supports protocols such as : TCP/IP, IGMP, SNMP, RMON, STP, and VLAN.
- switching mode : store-and-forward, passthrough mode.
Working voltage: 10~30V DC ( voltage fluctuation <10%) .
Power consumption: less than 4W ( typical DC24V) .
Supports multiple communication protocols, such as Ethernet, CAN, Profibus, and so on.
Overall dimensions: may vary according to model, e.g. 132mm x 105mm x 52mm or 147mm x 118mm x 54mm
Net weight: about 800g
- voltage : is usually 220V, but it is mentioned that the operating voltage may be 24V, depending on the model and application.
- Power : 1000W.
- frequency : 50Hz.
- high torque : 200NM.
- Dimensions : 300 mm x 200 mm x 100 mm.
- Material : aluminum alloy, stainless steel.
- Protection grade : IP5412, has good waterproof and dustproof performance.
Operating voltage: usually 24V
Current range: 100-400A
Support multi-channel input, improve system integration and data processing efficiency.
Dimensions: net depth/length 250mm, net height 140mm, net width 20mm3. It is also mentioned that the specification size is 5SHX2645L0004mm
Weight: The weight of may vary according to different packages and accessories. Some information shows that the weight is 0.9kg or 2kg at