Input Voltage Range: Operates on a 24V DC input voltage.
Input Type: Discrete input with 16 input points.
Input Signal Levels: Accepts signal levels of 0-5V DC and 24V DC.
Signal Type: DC input signals.
Input Impedance: 2500 ohms.
Overvoltage Protection: Yes, ensuring stable operation under voltage fluctuations.
Reaction Time: Less than or equal to 1 ms for state changes from 1 to 0 and vice versa.
Dimensions and Weight:
Dimensions: Approximate dimensions are 118mm high, 15mm wide, and 149mm deep. However, another source lists dimensions as 10cm x 12cm x 4cm.
Input Quantity/Power Consumption: It can handle 8 analog inputs with a power consumption of 2W.
Input Resolution: Has a high input resolution of 12 bits.
Absolute Maximum Input: Can accommodate up to 50V DC and 25mA.
Input Impedance: Features an input impedance of 250 Ohm current (+/-0.01%) and > 20MOhmVoltage.
Accuracy: Exhibits excellent accuracy with an absolute accuracy error of +/- 0.1% for maximum full scale and +/- 0.05% for full scale.
Dimensions and Weight:
Dimensions: The approximate dimensions are 235mm in length, 1211mm in width. However, please note that these dimensions may vary depending on the specific packaging or mounting configuration.
Weight: The exact weight of the module is not provided in the available sources. It is recommended to contact the manufacturer or refer to official documentation for accurate weight information.
1C31194G03 is a valve positioner electronic module 1 from Emerson’s Ovation family.
The module supports rail mounting with specific material codes (e.g. 5214) and system functions1.
function :
The 1C31194G03 module plays a key role in industrial automation systems and is used to control the valve position, ensuring precise control of the process1.
It may work in concert with other sensors and actuators to implement complex regulation and sequential control strategy
The CI522 is a contactless reader chip that operates at 13.56MHz
It supports the ISO/IEC 14443 A/MIFARE standard and is suitable for a variety of scenarios such as smart door locks, NFC applications and electric vehicles
Weight :
CI522 As a chip product, its weight is usually very light. However, the exact weight may vary depending on the package form and product model.
For example, in some contexts, the weight may be mentioned as 0.59kg5 or 2kg6, but these may refer to the weight of the entire module or device, including the CI522 chip, rather than the chip itself.
function :
The CI522 is used to achieve contactless data reading and writing functions, especially for applications where near field communications1 is required.
It can communicate wirelessly with electronic tags and is widely used in smart door locks, NFC payment, access control systems and other fields
The BENTLY 3500/53-03-00 is a dual channel module monitoring module belonging to Bently Nevada’s 3500 Series 1.
This module is commonly used in overspeed protection systems, providing high reliability and fast response in redundant tachometer systems2.
function :
Mainly used in industrial control, process monitoring and other scenarios, as part of the overspeed protection system2.
The module accepts a variety of sensor signals, has a variety of LED indicator status, and provides short circuit and ESD protection2.
Specifications: Gaming mouse, support wired +2.4G dual-mode connection 1.
Weight: about 96 g 1.
Function: For gaming esports, support macro programming, suitable for desktop and notebook use 1.
Parameters: photoelectric resolution up to 5600dpi, number of keys 7, wireless transmission frequency 2.4GHz1.
Dimensions: Approx. 120.34mm x 69.2mm x 42.59mm1.
A type of power supply or converter :
Specifications: Specific specifications may vary from product to product, but usually include parameters such as voltage and current.
Weight: For example, the weight of a power supply is 2kg3, but note that this is only an example, the specific weight must be determined according to the actual product.
Function: Convert or provide electrical energy, depending on its application scenario23.
Parameters: Output voltage 24VDC, power 240VDC, current 3.6A, etc. 2, but the specific parameters are subject to the product manual.
Size: If not specified, the size information should refer to the specific product specification sheet.
Model: PM511V08, part number: 3BSE011180R11.
Mainly used in industrial automation systems for process control and monitor1.
It is an analog communication module, which is often used for analog signal exchange and communication with sensors, actuators and other equipment.
Weight :
Different sources give different weight information. One source says it weighs 2KG3, while another says it weighs 0.2kg4. The exact weight may vary from batch to batch or configuration.
function :
It is mainly used for the acquisition and communication of analog signals to realize the automation and intelligence of industrial production process2.
Supports a variety of communication interfaces, such as serial ports, Ethernet, etc., and can exchange data with other devices and systems2.
High precision, stability and reliability for harsh environments2.
Specifications: The specifications of the 3BSE018161R1 would typically include its operational parameters, such as voltage and current ratings, frequency response, power handling capability, and environmental conditions under which it can operate reliably. These specifications ensure that the component meets certain performance standards and is suitable for its intended application.
Weight: Without precise details, the weight of the 3BSE018161R1 cannot be accurately stated. However, if it’s an electronic component, its weight would likely be relatively light, ranging from a few grams to possibly tens of grams, depending on its size and construction materials.
Function/Purpose: The primary function of the 3BSE018161R1 would be determined by its design and application. It could serve as a sensor, controller, transducer, or some other specialized electronic component, performing tasks such as signal conversion, data processing, or system control within a larger electronic system or device.
PP846A1 is designed to meet specific performance criteria, tailored for its intended application.
It incorporates advanced materials and manufacturing processes to ensure reliability and durability.
Weight:
The weight of the PP846A1 can vary depending on the exact composition and design. Without specific details, a typical range might be between 50 to 200 grams, but this can significantly differ based on actual construction and materials used.
Function/Purpose:
PP846A1 serves a defined purpose within its application, which could range from being a structural component, an electronic part, or a specialized tool. Its function is to enhance or enable specific operations within a system or device.
Weight: Manufacturer’s specifications required for exact weight.
Dimensions: Precise measurements available in product manual.
Parameters & Specifications:
Storage Capacity: Adequate for program storage and execution.
I/O Points: Vary by model, accommodating diverse automation needs.
Communication Protocols: Supports standard protocols for system integration.
Technical Details: Voltage range, power consumption, environmental ratings in official documentation.
Used for various industrial applications such as signal control, valve control, pump control, and alarm systems.
Parameters:
Input Voltage: 100-240V AC.
Output Voltage: 24V DC.
Maximum Output Current: 2A.
Operating Temperature Range: -40°C to 85°C.
Dimensions: 110mm x 80mm x 30mm.
