Processor: Typically equipped with a PowerPC 603e processor.
Memory: Supports up to 64MB of SDRAM and 4MB of flash memory.
Includes Ethernet, SCSI, serial, and parallel interfaces.
Supports multiple operating systems, including VxWorks and Linux.
Type: High-performance servo controller with PLC functionality1.
Input/Output: Features high-resolution analog input/output and position sensor interfaces1.
Control Accuracy: Provides precise closed-loop control for dual hydraulic servo actuators1.
PLC Functionality: Incorporates Programmable Logic Controller (PLC) functionality for enhanced control capabilities1.
High-Resolution Interfaces: Equipped with high-resolution analog input/output and position sensor interfaces for precise data acquisition and control1.
Fast and Accurate Control: The special structural design enables rapid and accurate closed-loop control of dual hydraulic servo actuators1.
Compatibility and Integration: Compatible with various systems and can be easily integrated into existing control architectures.
Durability and Reliability: Designed for industrial use, the controller offers high durability and reliability in harsh environments.
Processor: Typically equipped with a PowerPC 603e processor.
Memory: Supports up to 64MB of SDRAM and 4MB of flash memory.
Includes Ethernet, SCSI, serial, and parallel interfaces.
Supports multiple operating systems, including VxWorks and Linux.
Power range: 4kW to 900kW.
Voltage: Support 230V to 415V (AC) and 208V to 690V (AC).
Frequency: 50/60Hz.
Dimensions: The specific length, width and height dimensions may vary depending on different production batches or custom requirements, but the common external dimensions are 220mm x 200mm x 300mm.
Weight: The weight may vary depending on the actual configuration and accessories, but some sources indicate a gross weight of about 17.5kg.
Processor: Motorola PowerPC 603e.
Clock Rate: 266MHz.
Memory: Maximum of 128MB SDRAM.
Interfaces: Ethernet, SCSI, Serial, etc..
Size: 6U VME single slot.
Weight: Approximately 2.3kg or 2.4lb, depending on the source.
Model Number: MR-J2S-22KB.
Power Supply: Typically, it can accept a voltage rating of AC220 or DC24, depending on the specific configuration.
Speed Response Frequency: Up to 5ms, with actual product performance varying. However, some sources indicate a higher speed loop frequency response of 550HZ for the servo amplifier in this series.
Communication Interfaces: Supports RS232, RS485, or RS422.
Operating Temperature Range: 0-40 degrees Celsius.
Memory Expansion Capacity: Up to 64GB.
Output Frequency: 50KHZ.
Input voltage: 24VDC nominal value.
Operating temperature: -40℃ to 70℃.
Power consumption: 10W.
Number of channels: 16 channels
Analog input range: 4-20mA.
For the 3721 digital input card, its external dimension is 100mm×120mm×50mm, and the weight is 200g.
For the 3721 output module, the dimensions are 176 x 117 x 43 mm and the weight is 0.88 kg.
Communication Ports: The module provides multiple serial communication ports for data transmission and reception.
Baud Rate: It supports baud rates ranging from 1200 to 115.2 kbaud, providing flexibility for various communication needs.
Protocol Support: The module supports protocols such as Modbus, CCM, and DNP3, enabling compatibility with a wide range of devices and systems.
Software Configurability: The module offers software-configurable RS-232, RS-485, and RS-422 serial communication, providing flexibility in communication settings.
Fault Status Reporting: It includes fault status reporting, allowing for easy diagnosis and troubleshooting of communication issues.
Isolation: Port-to-backplane isolation ensures reliable and noise-free communication.
Upgradability: The module supports firmware upgrades, enabling compatibility with future system enhancements.
Model: IC695CPL410
Brand: General Electric (GE)
Operating System: VxWorks
Processor: AMD G Series Quad Core, 1.2 GHz
Power Requirements: Input Power (Max) – 20 Watts, Input Voltage (Min) – 18 VDC, Input Voltage (Max) – 30 VDC
Display: OLED
Security Features: Secure Boot and Trusted Platform Module (TPM)
Input Type: ADV151-E50/B5S00 is a digital input module with 32 channels, designed for 24 V DC isolated power supply.
Suffix Codes: The suffix code “-E50” typically indicates a specific configuration or version of the module, while “-B5S00” specifies the type of connector or interface, which in this case is a digital input with pressure clamp terminals.
Isolation: The module offers isolation, which helps to reduce electrical noise and interference, enhancing the accuracy and reliability of the input signals.
Configurable Options: ADV151-E50/B5S00 provides various suffix codes and options for different applications and system requirements.
Compatibility: The module is compatible with YOKOGAWA’s automation and control systems, allowing seamless integration into existing industrial setups.
Input Signal Type: It provides high-speed digital input signal acquisition and processing, typically supporting input signals ranging from 0 to 32 VDC.
Input Signal Update Rate: The module has an input signal update rate of 200 μs, ensuring fast and accurate signal acquisition.
Input Channels: The FBM230 P0926GU offers 8 input channels, allowing for simultaneous monitoring of multiple digital signals.
Isolation: The module provides 250 Vrms, 60 Hz isolation for enhanced signal integrity and system reliability.
Processor: The NI PXIE-8861 is powered by a high-performance Intel Xeon E3-1515 processor, providing excellent computational capabilities for processor-intensive tasks.
Memory & Storage: It includes ample memory and integrated hard drive for storing and processing data efficiently.
I/O Connectivity: The controller boasts a comprehensive set of I/O ports, including Thunderbolt 3.0, Display, USB 3.0, USB 4, and Ethernet ports, as well as serial and GPIB interfaces. This ensures seamless connectivity and communication with external devices.