Data output: supports ModBus TCP/IP and ModBus RTU ( serial) , ModBus RTU data rate is 19.2 kbaud, data bit is 8, parity is even, stop bit is
Default IP address: 192.168.255.1, Subnet mask: 255.255.255.0
ModBus Ethernet interface: RJ 45 port, 10BaseT supported
specifications :
Although the exact dimensions ( L x W x H) are not given directly, is mentioned as a 3U plug-in module with a slot 1, reduces the cabinet space requirement by half compared with a traditional 6U card
Input voltage: 48V DC
Output voltage: 24V DC
Output current: 22A ( may vary according to specific model)
Rated power: 528W
Efficiency: >89%
Ripple and noise: <2mVpp
Operating temperature: -25°C to +70°C
Storage temperature: -40°C to +85°C
Humidity: 5% to 95% ( non-condensing)
Input voltage range: 10.5-30 volts ( valid)
Output voltage range: 0-10 volts ( valid value)
Maximum output current: 24 amps
Maximum frequency: 2500 Hz
Accuracy: ±1%
specifications :
Working voltage: 24Vdc/120Vac
Supported system: PLC/DCS system
Supports a variety of communication protocols, such as TriStation, Modbus, TCP/IP and so on
The Q173CPU is part of Mitsubishi’s Q Series motion controllers and uses a 64-bit RISC processor that reduces run times to 0.88ms, improves CAM speed and reduces operational response times. A single Q173CPU can control up to 32 axes for complex motion control needs.
Weight :
There are different accounts of the weight of the Q173CPU. One says 0.22kg, another says 2kg, and still another says 1kg. The exact weight may vary depending on the product model or configuration.
Processor: MPC7457 PowerPC, running at 1.267 GHz.
Memory: supports up to 1GB of on-board DDR ECC memory.
VMEbus protocol: supports 2eSST protocol, provides 320MB/s transmission rate.
- specifications :
Storage: with 128MB flash.
Cache: includes 32K/32K L1 cache and 512K L2 cache, and 2MB of NVRAM.
Scalability: supports two 33/66/100 MHz PMC-X sites, allows the addition of industry-standard dedicated modules.
Working voltage: 10~30V DC ( voltage fluctuation <10%) .
Power consumption: less than 4W ( typical DC24V) .
Supports multiple communication protocols, such as Ethernet, CAN, Profibus, and so on.
- specifications :
Overall dimensions: may vary according to model, e.g. 132mm x 105mm x 52mm or 147mm x 118mm x 54mm
Net weight: about 800g
- voltage : is usually 220V, but it is mentioned that the operating voltage may be 24V, depending on the model and application.
- Power : 1000W.
- frequency : 50Hz.
- high torque : 200NM.
Specifications :
- Dimensions : 300 mm x 200 mm x 100 mm.
- Material : aluminum alloy, stainless steel.
- Protection grade : IP5412, has good waterproof and dustproof performance.
Operating voltage: usually 24V
Current range: 100-400A
Support multi-channel input, improve system integration and data processing efficiency.
- specifications :
Dimensions: net depth/length 250mm, net height 140mm, net width 20mm3. It is also mentioned that the specification size is 5SHX2645L0004mm
Weight: The weight of may vary according to different packages and accessories. Some information shows that the weight is 0.9kg or 2kg at
The REF615C-D is a feeder protection measurement and control device from ABB that integrates protection, control, measurement, communication, monitoring and arc protection
The product is fully developed and designed according to the international standard IEC 61850 platform, which supports the interoperability and horizontal communication of intelligent devices in the station
function :
The REF615C-D can be used as primary protection for overhead lines and feeders in distribution networks, as well as backup protection for equipment such as transformers
Product Model: 3CP260.60-1.
Brand: B&R.
Series: 2005 series CPU module.
Technical features: Adopt B&R’s new reACTION technology, with the latest IT technology development, integrated FPGA chip
function :
3CP260.60-1 As B&R 2005 series CPU module, is the core component in the automation control system.
