Grid view List view

Showing 2533–2544 of 19460 results

IS220PDIOH1B

¥6,308.00

Dimensions:

The module measures approximately 4.5 inches in width, 3.5 inches in height, and 2.25 inches in depth.

Features:

Signal Processing: The module is capable of receiving and processing analog input signals, such as voltage or current, which represent various physical quantities like temperature, pressure, flow rate, etc..
Multi-Channel Capability: It typically offers multiple analog input channels, allowing for the simultaneous monitoring of multiple signal sources.
Communication Interfaces: The module is equipped with communication interfaces that enable it to integrate and exchange data with other automation devices, control systems, sensors, and actuators. These interfaces can include Ethernet, Modbus, Profibus, DeviceNet, and others.
Configuration and Programming: Users can configure and program the module’s behavior through configuration software or programming methods to meet specific application requirements.

IS220PRTDH1B

¥5,309.00

Parameters and Specifications:

Type: IS220PRTDH1B is a control module, specifically a fuel gas control module, designed for use in gas turbines and other industrial gas-fired equipment.
Control Functions: It is responsible for monitoring and controlling various aspects of the fuel gas system, including ignition, acceleration, load adjustment, safety, and stability.

Dimensions and Weight:

Dimensions: The module measures approximately 34 x 18 x 10 centimeters (or 13.39 x 7.09 x 3.94 inches).
Weight: The module weighs approximately 0.82 kilograms (or 1.81 pounds).

IC695CRU320

¥3,956.00

Parameters and Specifications:

Type: IC695CRU320 is a PACSystems RX3i series redundant CPU module.
CPU Performance: It exhibits powerful processing capabilities, efficiently executing control logic and computational tasks.
Memory: The module provides up to 64 MB of battery-supported memory and 32 KB of discrete input/output memory.
Communication: Supports various communication interfaces and protocols, such as Modbus RTU, SNP, and serial I/O, enabling seamless integration with other devices.
Power Requirements: Operates on +3.3V DC at 1.0A and +5V DC at 1.2A nominal.
Operating Temperature: The module can operate within a temperature range of 0 to 60°C (32 to 140°F).

05701-A-0302

¥3,695.00

Parameters and Specifications:

Type: The HONEYWELL 05701-A-0302 is a single-channel control card designed for automation and control systems.
Precision: It offers high precision measurement capabilities, ensuring accurate analog input signals for precise system control.
Signal Support: Supports multiple signal types, including analog and digital signals, for connectivity with various sensors and actuators.

Dimensions and Weight:

Dimensions: The control card measures approximately 290mm x 380mm x 120mm.
Weight: The specific weight is not provided in the references; it’s recommended to check the manufacturer’s official documentation for accurate weight information.

A6110

¥5,320.00

Dimensions and Weight:

The exact dimensions and weight of the EMERSON A6110 module may vary depending on the manufacturer and specific version. It is advisable to refer to the manufacturer’s official documentation or contact them directly for accurate measurements.

Features:

High Accuracy: The module offers precise vibration monitoring, ensuring reliable and accurate protection of machinery.
Flexibility: It can be configured to monitor various types of rotating equipment, such as steam turbines, compressors, and hydraulic turbines.
Integration: EMERSON A6110 can be integrated into larger process control systems, providing real-time vibration data for proactive maintenance and fault prediction.

PFTL 101B 20.0KN 3BSE004203R1

¥5,436.00

Parameters and Specifications:

Rated Load: 20.0 kN (kilonewtons).
Power Supply: 24 VDC (Volts Direct Current).
Output Signal: 4-20 mA (milliamperes).
Accuracy: ±0.1% FSO (Full Scale Output).
Operating Temperature Range: -20°C to 60°C.

Dimensions and Weight:

Dimensions (Height x Width x Depth): 100 mm x 40 mm x 80 mm.
Weight: 0.3 kg (kilograms).

PPC905AE101

¥3,062.00

Parameters and Specifications:

Input/Output Characteristics: It can receive digital signals from the control system and convert them into control signals suitable for external devices.
Communication Interfaces: It supports various industrial communication protocols such as Modbus and Ethernet, enabling seamless integration with different automation systems.
Programming and Configuration: Users can configure the module and adjust its parameters through dedicated configuration software.

Dimensions and Weight:

Dimensions: Typically, it measures around 96mm x 96mm x 100mm. However, please note that the exact dimensions may vary depending on the specific model or variant.
Weight: The exact weight is not mentioned in the provided references. It is recommended to refer to the manufacturer’s official documentation for accurate weight information.

F8650X

¥4,958.00

Parameters and Specifications:

Safety Standard Compliance: The F8650X meets the highest safety standards for industrial automation, such as IEC 61511 and IEC 62443, ensuring reliable and secure operation.
Operating System: It runs a dedicated operating system specifically developed for safety-critical applications, providing enhanced security and stability.
Firmware Security: The program code is inaccessible during operation, ensuring the integrity and security of the system.

Dimensions and Weight:

Dimensions: The module measures 280mm x 120mm x 45mm.
Weight: It has a weight of approximately 1.5kg.

F8627X

¥6,320.00

Parameters and Specifications:

Processor: The F8627X features a high-performance processor capable of handling complex control tasks efficiently.
Memory: It comes with sufficient memory to store programs and data, ensuring smooth operation.
Safety Standards: The controller meets various safety standards and certifications, such as TÜV and CE, ensuring reliable and secure operation in industrial environments.

Dimensions and Weight:

Dimensions: The exact dimensions of the HIMA F8627X may vary slightly depending on the specific model or variant. However, it is typically designed for a compact footprint, suitable for installation in space-limited environments.
Weight: The weight of the module is not specifically mentioned in the provided references. It is recommended to refer to the manufacturer’s official documentation for accurate weight information.

TRICONEX 3009

¥5,241.00

Parameters and Specifications:

SIL-3 Certification: The TRICONEX 3009 is SIL-3 certified, ensuring the highest level of safety and reliability in industrial control systems.
TMR Architecture: It features Triple Modular Redundancy (TMR) protection, providing enhanced fault tolerance and system availability.
I/O Capacity: The controller supports up to 96 I/O points, allowing for extensive connectivity with sensors and actuators.

Dimensions and Weight:

Dimensions: Exact dimensions may vary slightly depending on the specific configuration and accessories. However, the controller is designed for a compact footprint, suitable for installation in space-limited environments.
Weight: The weight of the TRICONEX 3009 is approximately 3 KG, making it easy to handle and install.

CI867K01

¥5,143.00

Parameters and Specifications:

Communication Interface: The CI867K01 supports the MODBUS TCP interface.
Transmission Speed: It offers transmission speeds of 10/100 Mbit/s (Ch1) and 10 Mbit/s (Ch2).
Connector Type: The module features an RJ-45 connector with 8 pins.

Dimensions and Weight:

Dimensions: The product’s net dimensions are approximately 127.5 mm (length) x 185 mm (height) x 59 mm (width).
Weight: The module weighs approximately 0.62 kilograms.

S710D-EST2

¥3,484.00

Parameters and Specifications:

Engine Type: It features a liquefied natural gas (LNG) -fueled engine with a displacement of 71.5 liters.
Generator Type: The engine is equipped with a synchronous generator, having a rated voltage of 6.9 kV.
Rated Power: The rated power of the engine is 9.7 MW.

Dimensions and Weight:

Dimensions: The exact dimensions of the GE S710D-EST2 are not provided in the references. However, it is typically designed to fit into industrial systems and equipment, often with a compact footprint.
Weight: The weight of the engine is 85,000 kg.