Grid view List view

Showing 18937–18948 of 19460 results

ABB 3BDH000741R1 3BDH000740R1

¥2,035.00
Abb 3bdh000741r1 are precision voltage measurement modules from the national instruments (ni) company, designed for the pxie platform.
Parameters and specifications:
Manufacturer: uab.
Model: 3bdh000741r1.
Type: voltage measurement module.
Accuracy: high accuracy, low error.
Measuring range: wide, from a few millivolts to a hundred volts.
Channels: the module can support measurement on many channels, providing parallel measurements.
Output data: the module provides different output interfaces, such as analog output, digital output or communication interface, for the transfer of measurements to other systems or devices.

ABB 5SXE05-0154 5SHY3545L0020

¥2,058.00
Abb 5sxe05-0154 5shy3545l0020 is a module designed to automate and control electrical devices.
Parameters and specifications:
Manufacturer: uab.
Model: 5sxe05-0154 5shy3545l0020.
Type: module of controlled silicon.
Operating voltage: 220v.
Output frequency: 20hz.
Processing speed: 230 m.
Ambient temperature: 26 c.

ABB PEF615E_D

¥2,036.00
Abb pef615e_d is a controller designed to control and monitor various electrical systems and devices.
Parameters and specifications:
Manufacturer: uab.
Model: pef615e_d.
Type: controller.
Power supply: 220v / 50hz.
External dimensions: 500mmx300mmx200mm.
Weight: 20kg.
Operating temperature: -20 c to 40 c.
Operating humidity: 10% to 90% rh.
Temperature control: + 0.1 c.
Sensor accuracy: + 0.2 c.
Maximum load: 20kg.
Maximum speed: 1.5m/s.

REXROTH MHD041B-144-PG1-UN

¥2,065.00
Rexroth mhd041b-144-pg1-un is a synchronous engine produced by Bosch rexroth.
Parameters and specifications:
Manufacturer: rexroth (Bosch group).
Model: mhd041b-144-pg1-un.
Type: synchronous engine.
Dimensions: 2
Motor frame: 82 mm (flange)
Central diameter: 50 mm
Motor frame length: 2.7 nanometers.
Encoder: integrated multiple absolute encoder (hiperface) with 128 appendices.
Output shaft: flat shaft (ring compaction).

EPRO PR9268/203-000

¥3,026.00
Epro pr9268/203-000 – is characterized by small dimensions, high reliability, and necessary for many applications non-contact measurement.
Parameters and specifications:
Type: vortex sensor.
Make: epro.
Model: pr9268/203-000.
Overall dimensions: 4.4cm x 10.8cm x 12.7cm.
Weight: 0.2kg.
Material: Germany.
Physical values to be measured:
Between the rotating and stationary parts.
Vibrations of the axis.
Axis eccentricity.
Radial and axial axles.

PARKER AR-04AE

¥3,026.00
Parker ar-04ae is a servomotor driver, which is offered for use in various industries, including, but not limited to, robotics, machine tools, and others, where precise position control is required.
Parameters and specifications:
Manufacturer: parker.
Model: ar-04ae.
Type: servomotor driver.
Power: 1kw.
Rated voltage: 24v.
Method of control: kloz-loop, provides monitoring and correction of output position for high-precision position control.
** mechanical and electrical components :** to achieve high speed, high-precision mode.

ICS TRIPLEX T8110B

¥2,036.00
Ics triplex t8110b is a module designed for industrial automation and control systems.
Parameters and specifications:
Manufacturer: ics triplex.
Type: processor module.
Processor: Intel core tm i7-4700eq, 2.4 GHZ.
Memory: up to 16 gb ddr3 ecc.
Storage: up to 128 gb SSD.
Interfaces: 2 gbe, 4 usb 3.0, 1 rs-232, 1 VGA.
Dimensions: 23″ (but the content of the content is different).

ABB RAPI-01C

¥1,036.00
Abb rapi-01c is an adapter module designed for abb frecvension converters.
Parameters and specifications:
Manufacturer: uab.
Model: rapi-01c.
Type: adapter board/module.
Compatibility: designed for abb frecvension converters.
Name: rapi-01c adapter board, spare parts for abb frecwension converters.
Source: may be supplied from different suppliers, including but not limited to used, original, etc.

FOXBORO FBM232 P0926GW

¥2,031.00
Foxboro fbm232 p0926gw is an automated control module that is widely used in a variety of industries.
Parameters and specifications:
Internal power consumption: < 5w.
Power supply: dc24v, but can also support ac/dc85-265v, dc-48v, dc12v.
Dimensions: 50mm x 136mm x 118mm.
Operating temperature: -10 c to +70 c (wide temperature -40 c to +75 c).
Storage temperature: -45 c to +85 c.
Humidity: 10% – 95% without condensate.
Mounting: can be mounted on a wall or din carriage rail.
Protocols support: o-ring (maximum 250 switches in a single ring network, recovery time <30ms), MSTP (RSTP/STP), open-ring, o-chain, iec 62439-2 MRP, ieee 802.3at, ieee 1588v2, ipv6, modbus TCP.
Ethernet technology: ieee 802.3az efficient energy-saving Ethernet technology.
Service quality management (qos) and IP bandwidth management: butt based.

TOSHIBA UTLH21

¥2,035.00
Yokogawa nfcp100-s00 s3 is a simulation input module developed and manufactured by the Japanese company yokogawa (or yokogawa electric corporation).
Parameters and specifications:
Manufacturer: yokogawa (yokogawa electric corporation).
Model: nfcp100-s00 s3.
Interface: h-band digital communication (hart protocol).
Free from explosive protection.
Transport weight: 2 kg.

ABB 3BHB004661R0001 KUC711AE01

¥6,444.00
Abb kuc711ae01 3bhb004661r0001 is a controller module designed for a wide range of industrial automation and control. This module, produced by abb, is part of a series of high-performance and reliable components designed for a variety of industries, including but not limited to production lines, machine building, monitoring and control systems, and power engineering.
Parameters and specifications:
Module type: kuc711ae01 3bhb004661r0001.
Manufacturer: uab.
Main functions: recording and processing of digital input signals, usually binary (0 or 1) states.
Input channels: the module typically has several digital input channels, each of which can be connected to a different digital input device.
Voltage/current range: the module supports a certain voltage or current range to adapt to different types of digital input devices.
Communication interface: the module can interface with other automated devices and control systems via communication bus, such as modbus, profibus, Ethernet /IP.
Programmeability: some digital input modules have programmable functions that allow the user to configure input channels and activation conditions.

YOKOGAWA NFCP100-S00 S3

¥6,541.00
Yokogawa nfcp100-s00 s3 is a simulation input module developed and manufactured by the Japanese company yokogawa (or yokogawa electric corporation).
Parameters and specifications:
Manufacturer: yokogawa (yokogawa electric corporation).
Model: nfcp100-s00 s3.
Interface: h-band digital communication (hart protocol).
Free from explosive protection.
Transport weight: 2 kg.