This module is designed to provide accurate and reliable performance in harsh environments. It features a rugged design and is built to withstand extreme temperatures, shock, and vibration.
Operating Temperature: -40°C to 85°C
Storage Temperature: -40°C to 125°C
Supply Voltage: 3.3V to 5V
Communication Interface: SPI
The VME172PA-652SE+MVME172PA-652SE Module is a versatile processing module that supports a wide range of applications, including military and aerospace, telecommunications, and industrial automation. The module features a compact, single-slot design that makes it ideal for embedded systems that require high performance computing in a small form factor.
Processor: 1.2 GHz PowerPC
Memory: 512 MB DDR SDRAM, 64 MB Flash
Ethernet: 1x onboard Ethernet interface
Form Factor: Single-slot VMEbus module
Power supply: 24V DC ± 10%
Operating temperature: -20°C to 60°C
Storage temperature: -40°C to 85°C
Communication speed: 9600 bps to 12 Mbps
Network topology: Bus, star, tree, and ring
Number of nodes: Up to 126
Maximum Input Voltage: 5 VDC
Maximum Current Consumption: 50 mA
Operating Temperature: 0°C to 50°C
Storage Temperature: -20°C to 70°C
Communication Interface: RS-232
Accuracy: ±2 µm
Repeatability: ±0.2 µm
– **Power Supply Voltage**: 3.3V
– **Dimensions**: 25mm x 25mm x 3.5mm
– **Operating Temperature**: -40°C to 85°C
– **Processor**: Cortex-M4
– **Interfaces**: UART, SPI, I2C
– **Connectivity**: Wi-Fi, Bluetooth
The HITACHI+LPU100H module is a highly reliable and efficient laser diode that offers excellent performance in a compact package. It is designed to deliver high output power with low thermal resistance, making it ideal for a wide range of demanding applications.
Wavelength: 450 nm
Output Power: 100 W
Operating Voltage: 2.2 V
Operating Temperature: -20 to 60°C
Package Type: TO-220
The HITACHI LPA245A Module is a high-performance, low-power, compact and lightweight module that integrates a GPS receiver, an antenna and a processor into a single device.
Power Supply Voltage: 3.3V
Frequency: L1, 1575.42 MHz
Channels: 32
Tracking Sensitivity: -165 dBm
Cold Start Time: 35 s
Warm Start Time: 34 s
Hot Start Time: 1 s
This module features a high-quality amplifier and speaker system, providing clear and powerful sound in a compact package. It also includes advanced audio processing capabilities, ensuring that your audio is crisp and clear.
Rated Power Output: 3W
Impedance: 4 ohms
Frequency Range: 20Hz – 20kHz
Distortion: < 10% Sensitivity: 85dB Signal to Noise Ratio: > 80dB
The ICS TRIPLEX+T8431 is a versatile module that can be used for a wide range of applications. It features 16 analog inputs and 16 digital outputs, along with a variety of communication options, including Ethernet and Modbus.
Analog Inputs: 16
Digital Outputs: 16
Communication: Ethernet, Modbus
Type: Solid-State Relay
Input Voltage Range: Specifies the voltage range required to activate the solid-state relay.
Output Voltage Range: The voltage range that the solid-state relay can switch and control.
Load Capacity: The maximum power or current rating that the relay can handle.
Switching Speed: The speed at which the relay can switch on and off.
Isolation Voltage: The maximum voltage the relay can withstand between input and output without breakdown.
Control Interface: The type of control signal (e.g., digital, analog) required to activate the relay.
Type: Converter/Interface Module
Protocol Conversion: Ability to convert between Ethernet/IP and ASCII protocols.
Number of Ports: Specifies the number of physical or logical ports available for connectivity.
Data Rate: The maximum speed at which data can be transmitted through the module.
Power Requirements: Specifies the voltage and current required to operate the module.
Physical Dimensions: Length, width, and height of the module.
Environmental Ratings: Operating temperature range, humidity tolerance, and any other relevant environmental specifications.
Type: Process Controller
Input Signal Range: The range of analog input signals that the controller can accept.
Control Output: The type and range of the control output signal (e.g., analog voltage or current).
Control Modes: The different control algorithms or modes supported by the controller (e.g., PID, on/off).
Accuracy: The degree of precision with which the controller measures and controls the process variables.
Communication Interfaces: Available interfaces for connecting to other devices or systems (e.g., RS-232, RS-485, Ethernet).
Display: Type and resolution of the controller’s display (if applicable).
Power Requirements: The voltage and current required to operate the controller.
Environmental Ratings: Operating temperature range, humidity tolerance, and any other relevant environmental specifications.