Grid view List view

Showing 17677–17688 of 20056 results

ABB SPER1C1

¥3,416.00
ABB SPER1C1 is a monitoring relay typically used in industrial automation systems to ensure the safe and reliable operation of circuits. Here are its key parameters, specifications, dimensions, weight, series, features, and functions described in English:
Parameters and Specifications:
Model Number: SPER1C1.
Manufacturer: ABB.
Type: DCS Module.
Application: Used to monitor the circuit breaker trip circuit and other important control circuits.
Dimensions and Weight:
The exact dimensions and weight of the SPER1C1 monitoring relay may vary depending on the specific variant and may not be widely available in the provided search results. It is recommended to refer to the official ABB documentation or contact the manufacturer for precise measurements and weight specifications.

PROSOFT PLX31-EIP-ASCII4

¥4,162.00
The PROSOFT PLX31-EIP-ASCII4 is a communication gateway module designed for industrial automation applications. It provides a bridge between EtherNet/IP-enabled devices and ASCII-based devices, enabling high-speed bidirectional data transmission. Here are its key parameters, specifications, dimensions, weight, series, features, and functions described in English:
Parameters and Specifications:
Voltage: Typically operates at 24V DC.
Current: The range of operating current is typically between 100-400A.
Serial Ports: Equipped with 4 serial ports.
Isolation: Serial port isolation of 2500Vrms port signal.
LED Indicators: Include indicators for configuration (CFG) and error (ERR).
Dimensions and Weight:
Dimensions: Approximately 13.67cm x 5.05cm x 11.13cm (length x width x height).
Weight: Typically weighs around 2KG.

ABB DSSR122

¥4,162.00
ABB DSSR122 is a module often used in industrial automation systems, particularly for digital signal processing and communication. Here are its key parameters, specifications, dimensions, weight, series, features, and functions described in English:
Parameters and Specifications:
Model Number: DSSR122.
Manufacturer: ABB.
Bandwidth: 20MHz.
Real-time Sampling Rate: 25MS/s.
Accuracy: ±(0.01% reading + 1 pixel) for vertical sensitivity.
Dimensions and Weight:
Dimensions: Typically, the module has a standard width compatible with most rack systems, but the exact dimensions may vary depending on the specific variant. Some sources indicate a general size of DSSR122mm, but for precise dimensions, it’s best to refer to official ABB documentation.
Weight: The weight of the module is not specifically mentioned in the provided information. You would need to refer to ABB’s official documentation or contact the manufacturer for the exact weight.

ABB PM866AK01

¥3,145.00
ABB PM866AK01 is a high-performance industrial automation controller designed for applications requiring high reliability and availability. Here are its key parameters, specifications, dimensions, weight, series, features, and functions described in English:
Parameters and Specifications:
Clock Frequency: 133 MHz, ensuring fast processing speeds.
Memory: 64 MB of RAM, providing ample memory for program execution and data storage.
Performance: 0.09 ms for 1000 Boolean operations, indicating excellent computational efficiency.
Dimensions and Weight:
Approximate Dimensions: 18.6cm x 11.9cm x 13.5cm (HxWxD), suitable for rack mounting in industrial automation systems.
Weight: Approximately 1.1 kg for the controller module itself.

ABB FPR3346501R1012

¥3,240.00
ABB FPR3346501R1012 is a specific part or module within the ABB automation and control systems portfolio. Here are its key parameters, specifications, dimensions, weight, series, features, and functions described in English:
Parameters and Specifications:
Model Number: FPR3346501R1012.
Manufacturer: ABB.
Application: Used in industrial automation systems, specifically within PLC (Programmable Logic Controller) or DCS (Distributed Control System) configurations.
Type: PLC module or DCS I/O unit.
Dimensions and Weight:
Dimensions: Exact dimensions may vary depending on the specific configuration and manufacturer’s specifications. However, it’s designed for rack-mounting in standard automation cabinets.
Weight: The weight of the module is not specifically mentioned in the provided information. You would need to refer to ABB’s official documentation or contact the manufacturer for the exact weight.

SCHNEIDER 140DDO84300

¥4,205.00
The SCHNEIDER 140DDO84300 is a discrete output module specifically designed for industrial automation applications. Here are its key parameters, specifications, dimensions, weight, series, features, and functions described in English:
Parameters and Specifications:
Model Number: 140DDO84300.
Manufacturer: Schneider Electric.
Voltage Range: 10 to 60 V DC (output voltage); 20.4V DC to 28.8V DC (working voltage range).
Output Type: Discrete (negative logic).
Output Quantity: 16 discrete outputs.
Output Current: Up to 2A per channel.
Maximum Load Current: 12A per module; 6A per group.
Switching Frequency: 2.5kHz.
Reaction Time: ≤ 1 ms for transitions between state 0 and state 1, and vice versa.
Dimensions and Weight:
Dimensions: While the exact dimensions may vary, it’s designed for standard rack mounting.
Weight: Approximately 0.45 kg.

SCHNEIDER 140CHS11000

¥3,450.00
The SCHNEIDER 140CHS11000 is a highly specialized module used in industrial automation systems. Here are its key parameters, specifications, dimensions, weight, series, features, and functions described in English:
Parameters and Specifications:
Model Number: 140CHS11000.
Manufacturer: Schneider Electric.
Type: Hot Standby Unit/Thermal Backup Module.
I/O Points: 687.
Function: Determines PCU and I/O scan synchronization.
Dimensions and Weight:
Dimensions: The exact dimensions may vary slightly depending on the manufacturer’s specifications, but it’s designed for standard rack mounting.
Weight: Approximately 1.6kg. However, please note that the weight may vary depending on the manufacturer and the specific configuration.

SCHNEIDER 140CPS11420

¥3,052.00
The SCHNEIDER 140CPS11420 is a power module specifically designed for industrial automation systems. Here are its key parameters, specifications, dimensions, weight, series, features, and functions described in English:
Parameters and Specifications:
Input Voltage/Power Type: Supports 230VAC (170~276V) and 115VAC (93~132V) with a frequency range of 47~63Hz.
Output Current: The output current is 750mA for 230VAC and 1300mA for 115VAC.
Instantaneous Peak Current: 38A at 115VAC and 19A at 230VAC.
Rated Power (VA): 130VA.
Power Consumption: Basic consumption is 6W, which increases with the output current (1.5x output current).
Fuse Rating: Uses a 2A slow-break fuse.
Harmonic Distortion: Less than or equal to 10% of the basic RMS value.
Certifications and Standards: Complies with CUL certification and meets RoHS standards.

SCHNEIDER 140CRA93200

¥4,216.00
The SCHNEIDER 140CRA93200 is a Remote I/O Adapter Module specifically designed for industrial automation and control systems. Here are its key parameters, specifications, dimensions, weight, series, features, and functions described in English:
Parameters and Specifications:
Model Number: 140CRA93200.
Manufacturer: Schneider Electric.
Input Voltage: 24V DC.
Communication Interface: Ethernet.
Digital Inputs/Outputs: 16 inputs and 16 outputs.
Operating Temperature Range: -20°C to 60°C (for the module) or 0°C to 60°C (for the storage environment).
Dimensions and Weight:
Dimensions: Compact modular design, suitable for rack mounting. The exact dimensions may vary slightly, but it’s designed for standard industrial rack systems.
Weight: Approximate weight is 10Kg. However, please note that the weight may vary depending on the manufacturer and the specific configuration.

SCHNEIDER 140AMM09000

¥3,425.00
The SCHNEIDER 140AMM09000 is a digital programming module specifically designed for industrial automation and control systems. Here are its key parameters, specifications, dimensions, weight, series, features, and functions described in English:
Parameters and Specifications:
Module Type: Digital Programming Module.
Input/Output Configuration: Typically configured with 4 analog inputs and 2 analog outputs.
Programming: Supports digital programming for flexible control logic implementation.
Dimensions and Weight:
Dimensions: The exact dimensions may vary slightly depending on the manufacturer’s specifications, but it is designed for standard rack mounting in industrial control cabinets.
Weight: The weight of the module is typically lightweight, suitable for industrial use, but the exact weight may vary.
Series:
The 140AMM09000 belongs to the Schneider Electric’s Modicon Quantum series of automation components.

SCHNEIDER 140CPU11303

¥4,268.00
The SCHNEIDER 140CPU11303 is a central processing unit (CPU) specifically designed for industrial automation and control systems. Here are its key parameters, specifications, dimensions, weight, series, features, and functions described in English:
Parameters and Specifications:
Model Number: 140CPU11303.
Manufacturer: Schneider Electric.
Series: Modicon Quantum series.
Processor Type: Central Processing Unit (CPU).
Processor Speed: Provides high processing speed for complex control logic and data processing tasks.
Memory: Features a large internal RAM capacity, typically 512K RAM, for storing user programs and data.
Clock Frequency: Operates at a clock frequency of 20 MHz.
Instruction Precision: 0.3 to 1.4 ms for 1K instructions.
Battery Type: Uses lithium batteries.
Dimensions and Weight:
Dimensions (Approximate): The module’s dimensions are suitable for standard rack mounting in industrial control cabinets. Exact dimensions may vary depending on the model and configuration, but generally, it’s comparable to the standard modules in the series.
Weight: Typically lightweight, suitable for industrial use. The exact weight may vary, but it’s generally within the range of similar modules.
Series:
The 140CPU11303 belongs to the Schneider Electric’s Modicon Quantum series of automation components.

SCHNEIDER 140ACO13000

¥4,135.00
The SCHNEIDER 140ACO13000 is an analog output module specifically designed for industrial automation and control systems. Here are its key parameters, specifications, dimensions, weight, series, features, and functions described in English:
Parameters and Specifications:
Output Quantity/Power: It offers 8 analog outputs with a power consumption of 5W.
Address Demand: It requires 8 output words.
Loop Voltage: Operates within a range of 6 to 30V DC.
Voltage Drop: It has a voltage drop of 6 to 30V at 25mA.
Analog Output Range: It supports various ranges such as 4 to 20mA, 0 to 4095 counts, 0 to 16000 counts, 0 to 25000 counts, and 0 to 20000 counts.
Update Time: It has an update time of 5ms.
Setting Time: The setting time can range from 1.6ms to 5% of the final value, and 3.2ms to +/-0.1% of the final value.
External Power Requirement: The module requires an external power supply ranging from 6 to 30V.
Dimensions and Weight:
Dimensions: It measures approximately 100 x 60 x 20 mm.
Weight: The module’s weight is approximately 1KG.