Grid view List view

Showing 16177–16188 of 19523 results

ABB G2010 A 10.4ST

¥5,402.00
The parameters, specifications, dimensions, weight, series, features and functions of ABB G2010 A 10.4ST are as follows:
Parameters and specifications:
Speed adjustment range: 250~3000 RPM, depending on the motor power and model.
Power range: covers 200W~2KW, suitable for scenarios with different power requirements.
CPU type: ARM Cortex-A8.
Memory: 512MB RAM.
Operating system: Windows Embedded Compact 7.
Series:
Series: ABB GOP2 series is a high-performance product launched by ABB.

GE DS200DDTBG2ABB

¥4,165.00
The following is detailed information about the parameters, specifications, dimensions, weight, series, features and functions of the GE DS200DDTBG2ABB module:
Parameters and specifications:
Wavelength range: 190~1100 nm.
Wavelength accuracy: ±1nm (within 200nm~900nm band).
Wavelength resolution: 0.1nm.
Bandwidth: 2nm.
Photometric range: ±3 ABS.
Stray light: 220nm > 3.3ABS.
Reading mode: A reading mode with transmittance, absorbance, and concentration.
Communication interface: includes USB1.1, USB interface, and interface for connecting computers, printers, and external keyboards.
Power supply: 200~240V, 50/60 Hz.

GE DS200UPSAG1AGD

¥3,520.00
The parameters, specifications, dimensions, weight, series, features and functions of GE DS200UPSAG1AGD module can be summarized as follows:
Parameters:
Input type: The module can monitor up to 12 RTD (Resistance Temperature Detector) inputs for stator, bearing, environmental or other temperature monitoring.
RTD Type: Each RTD type can be field-programmed to be 100Ω platinum (DIN 43760), 100Ω nickel, 120Ω nickel or 10Ω copper.
Specifications:
RTD circuit compensation: When using a three-wire RTD, the module automatically compensates the wire resistance.
Lead resistance: The lead resistance should not exceed 25Ω (platinum/nickel type RTD) or 3Ω (copper type RTD) per lead.
Series:
Series: The module is part of GE’s DS200 series, an important family of GE’s industrial automation products.

GE DS200UPSAG1AFD

¥6,204.00
The parameters, specifications, dimensions, weight, series, features and functions of GE DS200UPSAG1AFD module are as follows:
Parameters:
Voltage: 24V.
Current: Range 100-400A.
Specifications:
Size: 5SHX2645L0004mm.
Accuracy: between 0.1 and 0.5.
Range: 120-210.
Control principle: DCS system is adopted.
Size and weight:
Weight: 2KG.

GE DS200SLCCG1AFG

¥5,416.00
The parameters, specifications, dimensions, weight, series, features and functions of GE DS200SLCCG1AFG module are as follows:
Parameters:
Input voltage: 24V DC.
Maximum current: 1A.
Output voltage: 0-10V DC (some versions).
Output current: 0-20mA (some versions).
Specifications:
Operating temperature: Usually -40°C to +70°C, but some versions may reach -40°C to +85°C.
System storage capacity: 32MB.
Communication protocols: Support Modbus, Profibus, DeviceNet, ControlNet, Ethernet/IP and other communication protocols.
Size and weight:
Size: According to the data, there are two possible sizes. One is 220mm x 120mm x 40mm and the other is 100mm x 50mm x 30mm. This may mean that there are different versions of the module.
Weight: According to some sources, it weighs 2KG.

GE DS200TCPSG1AME

¥3,065.00
The parameters, specifications, dimensions, weight, series, features and functions of GE DS200TCPSG1AME module are as follows:
Parameters and specifications:
Channel status data: The reference address and start address parameters are used to configure the read and reference of channel status data. The number of channel states can be 8 or 16.
Output range: including 0 to 10V, -10 to +10V, 4 to 20mA and 0 to 20mA, users can choose the appropriate output range according to the application needs.
Active channels: indicates the number of channels that the PLC CPU will scan, which is to ensure the effective operation of the system and the accuracy of data acquisition.
Stop mode Output state: When a module switches from RUN mode to STOP mode, it can be configured to remain in the last state or default to zero.
Size and weight:
Weight: The module weighs 0.8KG.
Series:
Series: Part of GE’s DS200 series, this series includes a variety of industrial automation and control products.

GE DS200TCPSG1APE

¥3,026.00
The parameters, specifications, dimensions, weight, series, features and functions of GE DS200TCPSG1APE module are as follows:
Parameters and specifications:
Voltage: The rated voltage is 380v, the voltage variation range is 380v±20%.
Current: It has the characteristics of three-phase three-wire voltage input, three-phase current balance, AC overvoltage and undervoltage protection.
Output: The output rating is 7A/220vG07H and the voltage regulation range is 180v-286v.
Accuracy: the accuracy of stable voltage and stable current are ≤0.5%, ripple coefficient ≤0.5%.
Frequency: The frequency range is 50hz±10%.
Conversion efficiency: At full load output, the conversion efficiency reaches ≥95%.
Size and weight:
Weight: Some data indicate that its weight is 2KG.

GE DS200TBQCG1ABB

¥3,320.00
The parameters, specifications, dimensions, weight, series, features and functions of the GE DS200TBQCG1ABB module are as follows:
Parameters and specifications:
Switch Settings: When the switch is set to 8 o ‘clock, only the first 8 toggle switches in front of the input simulator can be used. Each module can choose an 8 – or 16-point operation mode.
Response time: Off response time is 20 ms, on response time is 30 ms.
Backplane power consumption: On a 5-volt bus, the internal power consumption is 120mA when all inputs are turned on.
Size and weight:
Dimensions: The board is 11.25 inches long and 3 inches high and is designed for mounting in a rack cabinet.
Series:
The DS200 series is a module in a range of industrial automation and control products offered by GE.

GE DS200TBQBG1ACB

¥6,235.00
The parameters, specifications, dimensions, weight, series, features and functions of GE DS200TBQBG1ACB module are as follows:
Parameters and specifications:
Model: DS200TBQBG1ACB is an LST TMR reheat card manufactured and designed by GE for the Mark V series of steam turbine control systems.
Frequency: 13.560MHz.
Transmission power: 500w.
Reflected power (at power) : <3w.
Load current: 10ARMS.
Load voltage: 4000VRMS.
Transmission efficiency: >90%.
Load impedance: 50Ω.
Size and weight:
Size: There are two versions, one is 430mm(D)x220mm(W)x130mm(H), the other is 20.4×22.2×3.7cm. This may be due to differences in product versions or different measurement methods.
Weight: 5kg.
Series:
The DS200 series is one of a range of industrial automation and control products offered by GE.

GE DS200PTBAG1ADC

¥4,152.00
The parameters, specifications, dimensions, weight, series, features and functions of the GE DS200PTBAG1ADC are as follows:
Parameters and specifications:
Supported functions: Supports triple module redundancy (TMR).
CPU model: With IC697CPM790 CPU.
Memory: Has 1 MB of battery-supported memory, up to 512KB, for user programs.
Discrete input/output points: Support discrete input and output points up to 12K (in simplex mode), or 2048 votes of discrete input and 2048 votes of discrete output (in TMR configuration).
Analog input/output: Capable of handling analog input and output up to 8K (in simplex mode).
Scan rate: up to 0.4 microseconds per Boolean function.
Clock speed: 80486DX2 microprocessor with clock speed of 64 MHz.

GE DS200TBCAG1AAB

¥3,650.00
The parameters, specifications, dimensions, weight, series, features and functions of the GE DS200TBCAG1AAB module are as follows:
Parameters and specifications:
Voltage: 24V.
Current: Range of 100-400A.
Measurement effect: achieved unprecedented measurement effect and automatic measurement function, with high accuracy, wide measurement range, stable data, good repeatability, strong anti-interference ability, perfect protection function, fast charging and discharging speed and so on.
Size and weight:
Size: The exact size may vary from batch to batch or version, but some sources indicate that the size information is included in the model identification, namely “DS200TBCAG1AABmm”.
Weight: There are two different statements of 2KG and 0.2kg, which may reflect the difference in weight of different versions or configurations of the module.

GE DS200DTBCG1AAA

¥2,540.00
The parameters, specifications, dimensions, weight, series, features and functions of GE DS200DTBCG1AAA module are as follows:
Parameters and specifications:
Output current range: 4 to 20mA and 0 to 20mA.
Output voltage range: 1 to 5V and 0 to 5V.
Calibration: Factory calibrated to 4μA per count.
External power supply voltage range: 20VDC to 30VDC.
Resolution: A variety of different resolutions, such as 4μA for 4 to 20mA, 1mV for 0 to 5V, etc.
Accuracy: At 25°C, accuracy of 4 to 20mA and 1 to 5V is ±8μA, accuracy of 0 to 5V is ±25mV.
Size and weight:
Weight: There are different accounts, one is 2KG, the other is 0.2kg.
Series:
The DS200 series is one of a range of industrial automation and control products offered by GE.