Grid view List view

Showing 16165–16176 of 19523 results

GE VMIVME7750

¥3,026.00
The GE VMIVME-7750 is a high-performance VME bus digital signal processor manufactured by GE Intelligent Platforms. The following is specific information about its parameters, specifications, dimensions, weight, series, characteristics and functions:
Parameters and specifications:
Processor: PowerPC processor and FPGA technology, the specific model may be Freescale PowerPC 7447A, the main frequency of 1.267GHz. Another claim is that it is equipped with a maximum of 1.26 GHz Pentium III processor.
Memory: 512MB DR2 SDRAM, while supporting up to 1GB DDR2 SDRAM and expandable up to 4GB.
Port: It has two Gigabit Ethernet ports, supporting RJ-45 and optical fiber ports. In addition, there are two RS-232 serial ports, two RS-422/485 serial ports, and four USB 2.0 ports.
Size and weight:
Size: 6U, 160mm x 233mm. Another saying is that the size is 1200mm, which may refer to the size of the entire device, or the size of a different model or version.

GE IS200RAPAG1B

¥5,240.00
The GE IS200RAPAG1B is a PCB board assembly designed for Mark VI systems and is part of the Speedtronic family of steam/gas turbine management systems. The following is specific information about its parameters, specifications, dimensions, weight, series, characteristics and functions:
Parameters and specifications:
Motherboard system information: The module is equipped with Intel(R) Atom D2550 Atom processor, the main frequency is 1.86GHz, and the second-level cache is 1MB. The system chip is Intel D2550+NM10, uses Award BIOS, and supports ACPI. It is also equipped with a Type II CF card slot as an electronic disc.
I/O interface: The IS200RAPAG1B supports MINI PCIE ports, SATA/IDE ports, and USB ports, and also provides a variety of interface options such as parallel ports and serial ports to meet different connection requirements.
GPIO port: Provides an 8-bit GPIO port with four inputs and four outputs.
Size and weight:
Size: Its size is 100*260mm.
Weight: Approximately 0.13 kg.

GE IS200IGDMH1B

¥5,260.00
GE IS200IGDMH1B is a high-performance digital input module for industrial applications. The following is specific information about its parameters, specifications, dimensions, weight, series, characteristics and functions:
Parameters and specifications:
Input voltage: 24VDC.
Input type: Numeric input.
Input points: 16 points.
Current load: 2A.
Size and weight:
Size: There are two possible size descriptions. One is 125mm x 125mm x 42mm and the other is 23.6cm x 13.6cm x 10.6cm. This may be due to differences between different sources or product versions, please refer to the official documentation for specific sizes.
Series:
Series: IS200 series of GE.

GE IS200IGDMH1BBB

¥4,590.00
GE IS200IGDMH1BBB is a key module in the automation control system. The following is specific information about its parameters, specifications, dimensions, weight, series, characteristics and functions:
Parameters:
Operating voltage: The range is 220v~380v, which enables it to adapt to the voltage requirements of various industrial application scenarios.
Rated power: Up to 1.5A at USB full load 0.5A.
Clock accuracy: The maximum shift per day is 2 seconds.
Specifications:
Execution speed: 0.072 ms per 1000 Boolean instructions.
Number of blocks: A maximum of 512 blocks are supported.
Size and weight:
Size: The exact size may vary depending on the product version and specific configuration, but there is a version of 100mm * 260mm.
Weight: Approximately 2KG.

GE IS200DVIBH1B

¥5,620.00
The GE IS200DVIBH1B is an intelligent electrical sensor with a wide range of application scenarios. The following is specific information about its parameters, specifications, dimensions, weight, series, characteristics and functions:
Parameters and specifications:
Measurement range: A wide range of current measurements, capable of measuring currents from a few milliamps to thousands of amps. The voltage measurement range also covers both low and high voltage systems. In addition, it can also measure parameters such as active power, reactive power, total power and electrical energy.
Communication interface: supports a variety of communication protocols, such as Modbus, Profinet, etc., allowing the sensor to exchange data with the host computer, PLC or other intelligent devices.
Size and weight:
Size: Specific size parameters may vary from source to source or product version. Some sources indicate that its specification size is 302022mm, while others mention that its size is 110*210mm.
Series:
Series: GE IS200DVIBH1B belongs to the GE IS200 series intelligent sensor.

ABB PFTL101B 2.0KN

¥3,650.00
The ABB PFTL101B 2.0KN is a high-precision tension sensor or controller manufactured by ABB for a wide range of applications. The following is a specific description of its parameters, specifications, dimensions, weight, series, characteristics and functions:
Parameters and specifications:
Input and output: The equipment uses three-phase four-wire system or three-phase three-wire system of power grid input, output can be three-phase four-wire system or three-phase three-wire system. Three ammeters indicate the output current of each phase, while a transfer switch and a voltmeter are used to shift the output line voltage of each phase.
Voltage and frequency: The output voltage is 220V±3% or 110V±3%, and the frequency range is 50HZ/60HZ. The adjustment time is less than 1 second (when the input voltage changes by 10%).
Efficiency: The efficiency of the device is greater than 90%.
Size and weight:
Specification size: Its specification size is PFTL101B 2.0KN 3BSE004185R1mm.
Weight: According to some sources, it weighs about 20kg.
Series:
Series: The device belongs to the PFTL101B series.

METSO IOP114

¥3,056.00
METSO IOP114 is an automation control module, the following is specific information about its parameters, specifications, dimensions, weight, series, characteristics and role:
Parameters and specifications:
Input voltage: 220VAC.
Output voltage: 24VDC.
Maximum output current: up to 5A.
Operating temperature range: -20℃ to +50℃.
Protection rating: IP67, which means it has some dust and water resistance.
Size and weight:
Size: According to some data, its size is 100mm x 80mm x 40mm; Other sources indicate a size of 24mm x 58mm x 65mm. The exact size may vary depending on the product version or market availability, it is recommended to refer to the official documentation or contact the supplier for accurate information.

ABB LXN1604-6 3BHL000986P7000

¥4,950.00
ABB LXN1604-6 3BHL000986P7000 is a power module designed for industrial automation control. The following is specific information about its parameters, specifications, dimensions, weight, series, characteristics and functions:
Parameters and specifications:
Input type: Support 1-Phase/Single Phase, input voltage range of 85 VAC to 264 VAC, 90 VDC to 350 VDC, with a wide voltage input range, can adapt to different power environment.
Output power and voltage: The output power is 500 W with two output channels, channel 1 has an output voltage range of 24.7 VDC and an output current range of 20 A.
Accuracy level: The accuracy level of current and voltage is 0.2.
Size and weight:
Dimensions: Length 194 mm, width 113.6 mm, height 138 mm.
Weight: about 3 kg.
Series:
Series: Power module series of ABB brand.

ABB PFEA112-65 3BSE050091R65

¥6,425.00
ABB PFEA112-65 3BSE050091R65 is a powerful processor module that is mainly used in industrial automation and control systems. The following is specific information about its parameters, specifications, dimensions, weight, series, characteristics and functions:
Parameters and specifications:
Processor: This module is a 16-bit processor module.
Memory: It has 64 KB of user program memory and 32 KB of data memory.
Input and output: The module has 16 digital inputs, 16 digital outputs, and 8 analog inputs.
Power supply: Its power supply is 24 V AC/DC.
Size and weight:
Dimensions: The module measures 90 x 110 x 60 mm.
Weight: It weighs 1.2 kg.
Series:
Series: It belongs to ABB 800xA Control system and ABB Control AC 800M series PLC modules.

GE IC695CRU320

¥4,122.00
The GE IC695CRU320 is a redundant processor specifically designed for use in the PACSystems RX3i product family. It is manufactured by GE Fanuc/Emerson Automation and is designed to improve system availability and reliability. The following are the detailed parameters, specifications, size, weight, series, features and functions of the processor:
Parameters and specifications:
Processor: It’s equipped with a 1Ghz Celeron M processor with 64MB of RAM.
Communication interface: Supports two serial communication ports, including RS232 and RS485 communication standards. In addition, there are Ethernet ports and USB ports.
Battery backup: Up to 64MB of battery backup RAM is supported, ensuring data security and integrity in the event of a power failure.
Size and weight:
Weight: Depending on the data, its weight may be around 1.26KG or close to 0.9kg.
Dimensions: Its overall dimensions are 71mm x 138mm x 131mm.

GE IS200VSVOH1B

¥5,624.00
Regarding the parameters, specifications, dimensions, weight, series, features and functions of the GE IS200VSVOH1B module, the following answers are given based on the available information:
Parameters and specifications:
Type: IS200VSVOH1B is a power module or servo control board. The type and application scenario may vary according to the configuration and use.
Channels and outputs: With multiple channels and discrete output channels, the voltage and current of each channel can be independently controlled.
Programming configuration: With the characteristics of programmable configuration, convenient for users to carry out flexible control and application according to actual needs.

kollmorgen 6SM37L-4.000

¥6,035.00
The parameters, specifications, dimensions, weight, series, features and functions of Kollmorgen 6SM37L-4.000 are as follows:
Parameters and specifications:
Output voltage: 12V or 24V, depending on product model and configuration.
Output frequency: Usually 50/60Hz.
Working pressure: 0-60KN.
Size and weight:
Weight: Depending on the source, the weight may vary. One said it was 5.79kg, the other said it was 2KG.
Series:
Series: Servo motor series from Kollmorgen.