Showing 15061–15072 of 20056 results
¥ 6,205.00
Parameters and Specifications :
Input/Output Signals : Supports 16 digital inputs and 16 digital output signals1 .
Programmable Modes and Logic : Equipped with programmable working modes and logic1 .
Fault Diagnosis and Self-test : Has built-in fault diagnosis and self-test capabilities1 .
Communication Protocol : Supports Modbus communication protocol1 .
Operating Voltage Range : 24VDC to 48VDC1 .
Working Temperature Range : -20°C to 60°C1 .
Working Humidity Range : 5% to 95% (non-condensing)1 .
Safety Ratings : IEC 61508 SIL 3, IEC 61511 SIF 3, EN1 .
¥ 5,236.00
Parameters and Specifications :
Power Supply : 24 VDC1
Maximum Power Consumption : Approx. 30 W1
Memory : 128 MB1
Communication Interfaces : Ethernet, Serial, USB, etc.1
Control Axes : Up to 16 axes1
Control Precision : Up to 0.1 micrometer1
Maximum Speed : Up to 10 m/s1
Control Cycle : 1 ms1
Programming Languages : Multiple programming languages based on IEC 61131-3 standard, such as LD, ST, FBD, SFC, etc.1
¥ 6,235.00
Parameters :
Processor : 64 MHz, 32-bit Floating Point Central Processing Unit1 2 .
Memory : 1 Mbyte Memory, including 1 Mbyte of battery-backed memory1 2 .
Operating Voltage : 5V DC1 .
Maximum Power Consumption : 20W3 .
Specifications :
Operating Temperature Range : 0℃ ~ 60℃3 .
Storage Temperature Range : -40℃ ~ 85℃3 .
Discrete Inputs and Outputs : Up to 12K (mixed simplex mode only)2 4 .
¥ 4,152.00
Parameters and Specifications :
Input Voltage Range : 12-48VDC1
Output Voltage Range : 5VDC1
Output Current : Maximum 10A1
Efficiency : Greater than 90%4
Operating Temperature : -20°C to +50°C1
Storage Temperature : -40°C to +70°C1 2
Environmental Humidity : Not specified1
Dimensions and Weight :
Dimensions: 170mm x 105mm x 32mm1
Weight: Approx. 120g1
¥ 6,235.00
Parameters and specifications:
The NI PXI-7344 is a motion control module that provides advanced motion control functions.
It is suitable for PCI, PXI, and 1394 bus computers and supports fully programmable motion control of up to four independent or coordinated axes.
The controller includes dual processors, a real-time onboard operating system and multi-axis interpolation for both simple and complex motion applications.
It provides dedicated motion I/O for limit and origin switches, as well as additional I/O capabilities for general-purpose functions.
¥ 4,520.00
Parameters and Specifications :
Channels : 4-channel monitor1 2
Input : Accepts input from proximity sensors and seismic sensors1
Input Impedance : 10kΩ (standard I/O)1 2
Power Consumption : 7.7W1
Sensitivity (Radial Vibration & Axial Displacement) : 3.94 mV/μm (100 mV/mil) or 7.87 mV/μm (200 mV/mil)1 2
Dimensions and Weight :
Exact dimensions and weight are not provided in the search results. However, it is generally a compact module suitable for installation in a rack or panel.
¥ 5,262.00
Parameters and Specifications :
The exact parameters and specifications of the ABB P-HA-RPS-32200000 will depend on the specific model and application. However, it is generally part of ABB’s range of high-performance power supply units or related components.
Dimensions and Weight :
Dimensions : Exact dimensions are not widely available without accessing the technical documentation for this specific part number. However, it is likely to be a compact unit suitable for rack mounting or panel integration.
Weight : Similarly, the exact weight is not readily available without accessing the technical specifications. It will depend on the materials and construction of the unit.
¥ 4,150.00
Parameters and Specifications :
Input Voltage : 24V DC nominal1
Operating Temperature Range : -40℃ to 70℃1 2
Communication Protocols : Modbus, Ethernet1
Enclosure Rating : IP201 , IP652
Voltage Range (Input) : 10.5-30V DC (RMS)3
Voltage Range (Output) : 0-10V DC (RMS)3
Output Current : Max 24 Amps3
Frequency : Max 2500 Hz3
Accuracy : ±1%
¥ 5,260.00
Parameters and specifications:
Sensor input:
Number of input terminals: two independent
Input type: Vortex, differential
Emerson Sensor input part numbers: 6422, 6423, 6424, 6425
Measuring range:
Range: can be adjusted continuously through the configuration software
Minimum range: 2 V
Maximum range: 0-30 V
Power Supply:
Sensor Power supply: Independently buffered sensor power supply, electrically isolated from all system voltages and system power supply voltages
Nominal voltage: -26.75 VDC
Available current: Nominal 20 mA, maximum 35 mA
Frequency range: 0-20,000 Hz (or 65,535 RPM)
¥ 6,235.00
Parameters and specifications:
Current consumption:
24 VDC: 0.090 A
At 5 VDC: 1000 A (Note that 1000 A here may be an error, as this value is unusually high compared to current values at other voltages)
3.3VDC: 0.750A
1.2VDC: 0.007A
Used chassis slots: 2
Size and weight:
Dimensions: 12.7 x 101.6 x 127 mm
Weight: 0.5 kg
¥ 6,235.00
Parameters and Specifications :
Series : Emerson Network Power MVME Series1
Processor : MPC7457 processor running at 1 GHz1
Memory Bus : 133 MHz SDRAM memory bus1
Host Bus : 133 MHz1
PCI Buses : Dual 64-bit 33/66 MHz PCI buses1
Voltage : 24V2
Current : 100-400A2
¥ 5,266.00
Parameters and Specifications :
Axial Load : 15N MAX1
Phase Number : 21
Step Accuracy : 5%1
Temperature Rise : Below 80K/Max1
Operating Temperature : 0℃~+50℃ (some models up to -20°C to +60°C)1 2 3
Insulation Class : B (130℃)1
Insulation Resistance : 100MΩ MIN @ 500V DC1
Radial Load : 75N MAX @ shaft 20mm1
Axial Runout : Max 0.02mm (450g load)1
Radial Runout : Max 0.08mm (450g load)1
Step Angle : 1.81
Motor Total Length (L) : 761
Holding Torque (N.m) : 2.01
Rated Current (A) : 5.01
Phase Resistance (Ω) : 0.401
Phase Inductance (mH) : 1.71
Rotor Inertia (g.cm²) : 4801
Motor Weight (kg) : Depending on the model, it can be 1.06 kg or 0.2 kg1 2
Motor Wire Number : 41