Function: Communicate with the excitation control system to monitor and control the excitation system of the generator to ensure that the voltage and frequency of the generator output are within the required range.
Communication interface: It usually has various communication interfaces, such as Ethernet, Profinet IO, etc., to achieve data exchange and communication with the excitation control system.
Automatic adjustment function: The parameters of the excitation system can be automatically adjusted according to the need to maintain a stable power output.
Control principle: The use of specific control algorithms and technologies to ensure the stable output of power generators.
Detection wavelength: UV emission is in the wavelength range of 295 to 340 nm.
Optical sensitivity: With advanced filter adjustment, light wavelengths from standard 310 nm to 500 nm can be picked up.
Automatic setting: Includes an internal flame relay that automatically sets ON/OFF thresholds without the need for a remote flame amplifier or flame switch.
Sensor gain: The appropriate sensor gain can be automatically selected to adapt to different application environments.
Processor: It may be equipped with a Motorola or Freescale series processor, such as the MPC755, and the clock rate may be different, such as 400 MHz or higher.
Memory: Memory configurations may include 128 MB SDRAM or higher, such as up to 2 GB DDR SDRAM.
Bus interface: Communicates with other devices through the VMEbus interface, supporting VME64x and VMEbus standards.
Network interface: Includes dual 10BaseT/100BaseTX Ethernet or 10/100/1000 Base-T Ethernet ports.
Serial ports: such as RS-232 and RS-485 serial ports.
USB ports: Two USB 2.0 ports may be available.
I/O interfaces and expansion slots: including GPIO, provides a variety of I/O interfaces and expansion slots.
Function: As a PROFIBUS network scanner, transfer input and output data between PROFIBUS devices and processor data.
Communication protocol: Support PROFIBUS MVI56-PDPMV1 protocol, can be transmitted through Class 1 or Class 2 DPV1 services.
Processor and memory: The use of high-performance processors and memory to meet the needs of complex control algorithms and data processing.
Size and weight:
Size: The main machine size is 320×240×150mm.
Weight: about 1.2 kg (note: some search results may give a different weight value, such as 6kg, but 320 x 240 x 150mm dimensions usually correspond to 1.2 kg).
