Grid view List view

Showing 14545–14556 of 19460 results

GE IC695CRU320-CD

¥1,250.00

Parameters (参数):

  • Processor: Celeron M with a speed of 1GHz12.
  • Memory: Supports up to 64 MB of battery-backed RAM and 64 MB of non-volatile flash user memory1.
  • Switching Time: Maximum of 1 logic scan, minimum of 3.133 milliseconds13.

Specifications (规格):

  • Power Requirements: +3.3V DC at 1.0A (nominal), +5V DC at 1.2A (nominal)3.
  • Operating Temperature: 0 to 60°C (32°F to 140°F)3.
  • Embedded Communication: RS-232, RS-4853.
  • Supported Serial Protocols: Modbus RTU Slave, SNP, Serial I/O

ABB 3HAC025338-006

¥6,230.00
Parameters and specifications:
Power and load: Available in multiple versions with payloads between 150 and 500kg (up to 650kg with “no wrist”).
Range of application: Large reach distances of 2.55 to 3.5m, suitable for a wide range of industrial applications, including robotics, automation and machine tools.
Protection level: Foundry expert type protection level is IP 67, suitable for harsh production environment.
Communication rate: Supports a variety of communication rates, such as 9.6kBit/s, 19.2kBit/s, etc.

ABB REF615E-G

¥6,202.00
Parameters:
Voltage: 24V
Current: Range may be 100-400A (but specific parameters may vary)
Output frequency: 50HZ
Range: For analog input modules, the range may be 100-310 (specific parameters may vary)
Specifications:
Processor: May include an on-board notebook low-power Pentium III-M /Celeron processor
Front-end bus frequency: 133/166MHz
System memory: Onboard 256M memory, can be expanded to 768M
BIOS: 2/4M Phoenix Flash BIOS
Bus expansion: Provides 1 PCI expansion slot
I/O interface: including IDE interface, serial port, parallel port, USB interface, PS/2 interface and network interface

ABB UAC317AEV1

¥4,120.00

Parameters:

  • Voltage Rating: 24 V AC/DC
  • Current Rating: Likely specific to the application, but not explicitly stated.
  • Power Factor: 0.9
  • Utilization Category: AC-3

Specifications :

  • Dimensions: 85 mm x 45 mm x 107 mm
  • Weight: 0.8 kg

RELIANCE 5BC42AB2131C

¥6,230.00
Product Overview:
The 5BC42AB2131C module has been mentioned as an industrial automation and control component, possibly part of a DCS (Distributed control System).
It is used to reduce lead times and save money, possibly by drawing on inventories of surplus components.
Functions:
As an industrial automation and control component, the 5BC42AB2131C module may be used in a variety of industrial automation scenarios to enable the monitoring, control and optimization of equipment, production lines or systems.

SCHNEIDER 140CPU65160

¥4,026.00
Parameters and specifications:
Processor: Unity processor, 266 MHz.
Memory: 1024 kB RAM, expandable up to 8 MB.
I/O capacity: 31K words (input/output).
Slots: Slots 2/3/4/6/10/16 are available.
Communication interface: Support Ethernet, serial communication, etc.
Size and weight:
Dimensions: 233 mm x 167 mm x 31 mm.
Weight: 1.5kg.

GE IC693CPU374

¥4,251.00

Parameters:

  • Processor Speed: 133 MHz (or 33MHz, depending on sources)123
  • Processor Type: Embedded 58623
  • User Memory (Total): 240KB123
  • Storage Type: RAM and Flash12
  • Maximum Memory: 64K bytes1
  • Operating Temperature: 0°C to 60°C12
  • Ethernet Communication Ports: Two, with auto-sensing capability, supporting 10/100 Mbps transmission speed12

Mitsubishi GU-D08

¥6,235.00

Parameters and Specifications:

  • Model: GU-D08
  • Brand: Mitsubishi

Dimensions and Weight:

  • Size (Approximate): 310×138×400mm
  • Weight: 18kg

GE IC695CPU320

¥3,620.00

Parameters and Specifications:

  • Processor Speed: 1 GHz (Intel Celeron M Microprocessor)12
  • Memory: 64 MB RAM and 64 MB Non-Volatile Flash Memory12
  • User Memory: 65 MB (retained by Lithium Smart Battery Modules)1
  • Communication Ports: 2 Serial Ports supporting RS232 and RS485 communication standards12
  • Maximum Program Blocks: 512 (with maximum block size of 128 KB)1

ABB PFEA112-20

¥6,235.00

Parameters and Specifications:

  • Model: ABB PFEA112-20
  • Function: Tension Controller
  • Control Principle: PID Control (Proportional-Integral-Derivative)
  • Output Type: Analog
  • Number of Channels: 21
  • Output Range: 0-10V1
  • Accuracy: Up to 0.05% F.S.

FANUC A06B-6087-H126

¥6,235.00

Parameters and Specifications:

  • Input Voltage Range: 200-230 V12
  • Output Voltage Range: 283-325 V12
  • Output Power: 29.8 kW12
  • Power Regeneration: Returns energy to the power source during motor deceleration (regeneration)12

Dimensions and Weight:

  • Dimensions: 36x23x12 (approximate, in mm)3
  • Weight: 5.26 kg (approximate)3

Series:

  • FANUC Servo Drive Series

REXROTH DKC03.3-040-7-FW

¥6,235.00
Parameters and specifications:
Model: DKC033-040-7-FW
Rated voltage: 24V (according to search results [4])
Power and current: The specific value is not given directly in the search results, but it is used to control the servo motor, and its output current may be close to 40A (based on the “040” part of the model).
Function: Mainly used in high-precision positioning system, such as CNC machine tools