Grid view List view

Showing 14269–14280 of 19460 results

ABB SDCS-PIN-4

¥5,412.00
Parameters and specifications:
Rated voltage: Power supply voltage (e.g., there is a product nominal 24VDC).
Maximum current: 4A.
Max power: 80W.
Operating temperature: There are different ranges, such as -10℃ ~ +50℃, and -30℃ ~ +70℃.
Insulation impedance: ≥5000MΩ.
Safe overload rate: 150%F.S.
Limit overload rate: 200%F.S.
Zero point balance: ±1%F.S.
Input impedance: (380±5)Ω.
Output impedance: (350±2)Ω.
Output temperature effect: ±0.02%F.S/10℃.
Zero temperature effect: ±0.02%F.S/10℃.

GE IC693CPU374

¥4,251.00
Parameters and specifications:
Series: Series 90-30 Programmable logic controllers (PLCS) from GE.
Processor type: Embedded 586 with 133 MHz processor speed.
User memory: Total capacity: 240KB.
Communication interface: Support SNP and SNPX protocols on the power supply RS-485 port, built-in Ethernet communication (10/100 base-T/TX Ethernet switch), with two automatic sensing 10/100baseT/TX ports.
Protocol support: including SRTP and Ethernet Global Data (EGD).
Operating temperature: 0 to 60 degrees Celsius (32 to 140 degrees Fahrenheit).

GE DS3820PSCB1C1B

¥4,150.00
Parameters and specifications:
Input voltage: 90-132VAC or 180-264VAC
Input frequency: 47-63Hz
Output voltage: +5V 20A, +15V 2A, -15V 2A
Output power: 120W
Efficiency: >80%
Ripple and noise: +5V:<2mVrms, +15V:<1mVrms, -15V:<1mVrms
Protection function: over voltage protection, over current protection, short circuit protection, over temperature protection

PACIFIC SCIENTIFIC 33VM52-000-29

¥4,685.00
Parameters and specifications:
Make and Model: 33VM52-000-29 under the PACIFIC SCIENTIFIC brand.
Voltage and power: Operating voltage is 24 volts, power is 2.3 watts.
Speed and current: The speed is up to 5000 RPM, but there are two statements about the current, one is 0.6 amps, and the other is rated (continuous) for 3.1-5.7 A.
Encoder and output shaft: No encoder. The output shaft is a circular shaft with a diameter of 6.35 mm.

PROSOFT MVI56-PDPMV1

¥6,025.00
Parameters and specifications:
Function: As a PROFIBUS network scanner, transfer input and output data between PROFIBUS devices and processor data.
Communication protocol: PROFIBUS DPV0/V1 protocol is supported and can be transmitted through Class 1 or Class 2 DPV1 services.
Processor and memory: The use of high-performance processors and memory to meet the needs of complex control algorithms and data processing.
Configuration and diagnosis: Support the use of Rockwell Automation Ethernet interface to communicate with MVI56-PDPMV1 and FDT DTM via Ethernet routing, provide the project’s unique GSD file import library, support online slave station diagnosis, etc.

SCHNEIDER 140CPU43412A

¥4,952.00
Parameters and specifications:
Processor: A processor with high performance, possibly with multi-core processors and large memory capacity, for performing complex control algorithms and data processing.
Memory: Contains 512MB of memory and 256MB of flash memory.
Communication interface: Support Ethernet, Modbus, CANopen and other communication protocols in order to exchange data with other devices and systems.
Power supply mode: 24VDC.
Operating temperature: -20℃~60℃.

WESTINGHOUSE 5X00070G04

¥4,625.00
Parameters and specifications:
Model: 5X00070G04
Brand: Westinghouse
Usage: Commonly used as an analog input module in industrial automation and control systems
Compatibility: Connected devices include SIMATIC S7-300, SIMATIC S7-400, SIMATIC S5-115U/H, S5-135U, and S5-155U/H
Size and weight:
Specific size and weight information is not given directly in the search results provided.

FANUC A05B-2601-C400

¥4,502.00
Parameters and specifications:
The FANUC A05B-2601-C400 is a motor drive board commonly used in industrial automation and control systems.
It is usually used in conjunction with a servo motor to achieve precise control of the motor and improve the operating efficiency and accuracy of the equipment.
The control unit is FANUC Series 31i-WB.
The NC program storage capacity is 4MB.
Series:
The FANUC A05B-2601-C400 is a product in the FANUC family.

ABB ACS800-01-0060-3+D150+P901

¥5,412.00

Parameters and Specifications:

  • Series: ACS800
  • Model: ACS800-01-0060-3+D150+P901
  • Control Technology: Direct Torque Control (DTC) – the most advanced control method for AC asynchronous motors1.
  • Output Frequency Range: Up to 600Hz, enabling control of high-speed motors2.
  • Protection Features: Comprehensive detection and protection functions, including overvoltage, undervoltage, overload, instant power loss restart, acceleration, deceleration, and loss of speed during operation2.

ProSoft MVI69-MCM

¥5,416.00
Parameters and specifications:
Communication: Support Modbus master/slave communication.
Compatibility: Compatible with Allen-Bradley ControlLogix system.
Memory: 512KB RAM and 512KB flash.
Operating temperature: -40°C to 85°C.
Power consumption: 800mA@5V DC.
Input voltage: 5V DC.
Communication protocols: May include Modbus TCP/IP (according to search results 3, but there may be others).
Maximum number of connections: 32.

FOXBORO FBM216 P0917TN

¥5,046.00
Parameters and specifications:
Power supply: As a power module, the FBM216 P0917TN provides a stable power supply for driving various components and devices in the control system to ensure the normal operation of the system.
Voltage: 24V.
Current: 100-400A.
Modular design: easy to install and replace, easy to maintain and expand the system.
Size and weight:
Weight: Approximately 2KG.

TRICONEX 3503E

¥5,262.00
Parameters and specifications:
Input voltage: Usually 24VDC.
Output voltage: also 24VDC.
Input current: 1.5A.
Output current: 2A.
Operating temperature range: -40℃~70℃, it is also said that its operating temperature range can reach -10~70℃.
Storage temperature range: -40 ° C to 85 ° C
Communication interface: Support Ethernet, RS-232, RS-485, USB, etc.
Memory capacity: 32MB.