Grid view List view

Showing 14209–14220 of 19460 results

WESTINGHOUSE 1C31166G02

¥4,125.00
Parameters and specifications:
Input type: numeric input.
Working voltage: 220V.
Multiple channel configurations: The module has multiple independent channels, each of which can be configured individually for a different input signal.
Communication interface: supports a variety of communication protocols and interfaces, such as EtherNet/IP, Profinet, etc., to facilitate connection and communication with various industrial equipment and systems.

GE 369-HI-R-M-0-E-0

¥5,214.00

Parameters and Specifications:

  • Voltage Range: 50-300 VDC / 60-265 VAC
  • Rated Current: 6.8A
  • Control Modes: Overload Protection, Undervoltage Protection, Overvoltage Protection, Single-phase Power Failure Protection, Ground Fault Protection, etc.
  • Communication Interface: RS-232

Dimensions and Weight:

  • Dimensions: 270mm x 180mm x 90mm (L x W x H)
  • Weight: Approximately 3.5kg

Series:

  • GE-369 Series Motor Protection Relay, offered by GE Automation, which includes various models to meet different power and functional requirements for motor protection applications

PROSOFT PLX31-EIP-MBS4

¥6,412.00
Parameters and specifications:
Type: EtherNet/IP™ to Modbus® four-port serial communication gateway.
Supported PLC types: PLC2, PLC5, SLC, CLX, CMPLX.
Supported CIP services: 0x4CCIP table read, 0x4DCIP table write.
Maximum RPI time: ms per connection (specific value not given).
Supported message types: PCCC client connection.
Connection size: 248/248.
Modbus Serial specification: Supports up to 100 commands per master port, each configurable for function code, slave address, register addressing, and word/bit count.

ABB UGTMEM-01SB47SR

¥5,412.00
Parameters and specifications:
Brand: ABB
Model: UGTMM-01SB47SR
Voltage: 24V
Current: 100-400A (Note: this may be a range of parameters related to this module, not directly to UGTMM-01SB47SR)
Weight: 2KG
Packing: good
Delivery time: Stock
Communication interface: HDMI interface
Operating temperature: 60 (may be the operating temperature range or a specific value, specific need to refer to the product manual)
Alarm type: Light alarm

GE IC752SPL013

¥5,128.00
Parameters and specifications:
Function: Communicate with the excitation control system to monitor and control the excitation system of the generator to ensure that the voltage and frequency of the generator output are within the required range.
Communication interface: It usually has various communication interfaces, such as Ethernet, Profinet IO, etc., to achieve data exchange and communication with the excitation control system.
Automatic adjustment function: The parameters of the excitation system can be automatically adjusted according to the need to maintain a stable power output.
Control principle: The use of specific control algorithms and technologies to ensure the stable output of power generators.
Measurement interval: 5 seconds (8-channel terminal) /10 seconds (16-channel terminal).
Display unit: 3.5″ TFT color LCD monitor (320 x 240 pixels).
Input voltage: 24VDC.
Insulation voltage test: Passed.

SCHNEIDER 490NRP25400

¥4,059.00
Parameters and specifications:
Model: 490NRP25400
Brand: SCHNEIDER
Input voltage: 24V DC
Power consumption: 2.5W
Current: 100-400A (Note: this may be the current range of other relevant parameters, but not directly for the 490NRP25400 current parameter)
Supported protocols: Industrial communication protocols such as Modbus Plus
Size and weight:
Weight: Approx. 2.856 kg (shipping weight is 4 kg)

GE IC693CPU374

¥4,120.00
Parameters and specifications:
Processor speed: 133 MHz (some sources mention 33MHz, may vary by model or upgrade).
Storage capacity: Total user memory 240KB.
Maximum memory: 64K bytes.
Operating temperature: 0°C to 60°C.
Storage temperature: -40°C to +85°C.
Processor type: Embedded 586.
Typical scan rate: 0.15 ms per 1K logic (Boolean contacts).
Number of IP addresses: one.
Number of Ethernet ports: two, 10/100baseT/TX ports with automatic sensing.
Communication interface: Support SNP and SNPX protocols on RS-485 ports, support SRTP and Ethernet Global Data (EGD).

WESTINGHOUSE 1C31194G03

¥4,265.00
Parameters and specifications:
Brand: WESTINGHOUSE.
Model: 1C31194G03.
Type: May be a DCS (Distributed control System) card module or PLC (Programmable logic Controller) module.
Uses: Industrial automation, control system, data acquisition and monitoring, etc.
Series:
WESTINGHOUSE 1C31194G03 is part of Westinghouse’s Ovation family or family of related control systems

FIREYE 85UVF1-1CEX

¥5,214.00
Parameters and specifications:
Detection wavelength: UV emission is in the wavelength range of 295 to 340 nm.
Optical sensitivity: With advanced filter adjustment, light wavelengths from standard 310 nm to 500 nm can be picked up.
Automatic setting: Includes an internal flame relay that automatically sets ON/OFF thresholds without the need for a remote flame amplifier or flame switch.
Sensor gain: The appropriate sensor gain can be automatically selected to adapt to different application environments.
Size and weight:
Weight: The weight is about 48kg.

ABB XO08R2

¥4,621.00
Parameters and specifications:
Input voltage: 24V DC or 48V DC.
Output voltage: 24V DC.
Output current: 8A.
Power: 192W.
Operating temperature: -40°C to +70°C.
Storage temperature: -40°C to +85°C.
Protection level: IP67.
Size and weight:
Dimensions: 110 mm x 60 mm x 28 mm.
Weight: 0.5kg.

MOTOROLA MVME5100

¥3,412.00
Parameters and specifications:
Processor: It may be equipped with a Motorola or Freescale series processor, such as the MPC755, and the clock rate may be different, such as 400 MHz or higher.
Memory: Memory configurations may include 128 MB SDRAM or higher, such as up to 2 GB DDR SDRAM.
Bus interface: Communicates with other devices through the VMEbus interface, supporting VME64x and VMEbus standards.
Network interface: Includes dual 10BaseT/100BaseTX Ethernet or 10/100/1000 Base-T Ethernet ports.
Serial ports: such as RS-232 and RS-485 serial ports.
USB ports: Two USB 2.0 ports may be available.
I/O interfaces and expansion slots: including GPIO, provides a variety of I/O interfaces and expansion slots.

DEIF LSU-112DG

¥6,021.00
Parameters and specifications:
Control type: load balancing device control system.
Control mode: Load distributor.
Frequency: 35mm DIN rail or base mounting (this is usually related to installation, not operating frequency).
Operating temperature range: -20°C to +50°C (according to some search results) or -25°C to +70°C (depending on the model).
Rated voltage: 42*79 (may be size or mounting size).
Rated current: 5A.
Measurement range: 346 (the specific measurement content is not given).
Control accuracy: high.
Response speed: Fast.
Communication interface: Usually has RS485 or Ethernet interface, support Modbus and other communication protocols.
Power requirements: 24V DC or 110/220V AC, depending on model and configuration.