Grid view List view

Showing 14029–14040 of 19460 results

RMP200-8

¥5,481.00
Parameters and specifications:
When used as an Angle sensor:
Maximum torque: 8 N · m
Maximum speed: 200 RPM
Resolution: 0.0001 degree
Repeated positioning accuracy: 0.0005 degrees
Operating temperature: -40°C to +85°C
When used as a robot platform:
Maximum load: 200 kg
Maximum speed: 1.5m /s
Maximum acceleration: 2 m/s²
Maximum angular velocity: 100°/s
Maximum angular acceleration: 200°/s²
Battery voltage: 48 V

8440-1706 A

¥5,241.00
Parameters and specifications:
Output frequency: 50/60 Hz
Weight: 2.6kg
Size: 23165 (may be in centimeters or inches, but not specified in search results)
Use: Can be used with PLC system

HE693THM809C

¥6,541.00
Parameters and specifications:
Brand: GE (General Electric)
Type: Industrial control system and equipment module, specifically thermocouple input module
Import or not: Yes
Power: Rated
Warranty: customer service manufacturers prevail
Applicable industries: May include mining and shipping
Current: 0-60

IC693CPU374

¥4,629.00
Parameters and specifications:
Processor speed: 33MHz (some data mention 133MHz, may be a different model or upgraded version).
Storage capacity: 240K bytes.
Maximum memory: 64K bytes.
Communication port: 1 Ethernet port, 1 serial port.
Operating temperature: 0°C~60°C.
Main specifications: According to the rated current ln, there are 6A, 10A, 16A, 20A, 25A, 32A, 40A, 50A, 63A and other specifications; According to the number of poles, there are 1P (unipolar), 2P (two poles), 3P (three poles), 4P (four poles) and so on; According to the form of the circuit breaker instantaneous trip device, there are type B (3ln~6ln), type C (5ln~10ln), type D (10ln~20ln) and so on.

DSAX452

¥4,158.00
Parameters and specifications:
Brand: ABB
Model: DSAX452
Control principles: Other (may refer to specific control algorithms or logic)
Output characteristics:
Output points: 4, 8, 16
Output type: Relay output
Rated voltage: 24V DC
Allowable voltage range: 20.4 ~ 28.8V DC
Signal 1: Minimum 20V DC

TPMC815-11

¥5,487.00
Parameters and specifications:
Model: TPMC815-11
Interface type: ARCNET
Interface speed: 2.5 Mbps
Node address: Configurable
Bus topology: Supports star, bus, or ring
Power supply voltage: 5 V DC
Power consumption: Max. 5 W
Operating temperature range: -40°C to 85°C
Storage temperature range: -55°C to 125°C
Humidity: 5% to 95% (non-condensing)
Protection level: IP67

A6110

¥5,214.00
Parameters and specifications:
Type: A6110 may be a shaft vibration monitoring module, which is a component of the A6000 machine monitoring system. The module uses eddy current sensors for non-contact measurements such as axial and radial shaft displacement, shaft eccentricity, shaft vibration, etc.
Measurement principle: inductive type.
Supply voltage: 5 V (3… 5 k Hz).
Sensitivity: 270 mV/V (5 k Hz full scale).
Linear error: < 2%.
Temperature range: -20… +120℃.

IC693CPU374

¥5,269.00
Parameters and specifications:
CPU Type: single-slot CPU module with embedded Ethernet interface.
Processor speed: 133 MHz.
Processor type: Embedded 586.
Typical scan rate: 0.15 ms per 1K logic (Boolean contacts).
Storage type: RAM and Flash.
User memory (total) : 240KB
Protocol support: SNP and SNPX on the power RS-485 port, built-in Ethernet communication: Ethernet (built-in) – 10/100 base-T/TX Ethernet switch.
Number of Ethernet ports: two, 10/100baseT/TX ports with automatic sensing.
Number of IP addresses: one.
Protocol: SRTP and Ethernet Global Data (EGD).

IC697BEM733

¥6,235.00
Parameters and specifications:
Function: As a remote I/O scanner module, allows remote I/O stations to be installed up to 7,500 feet (2,275 meters) from the main controller.
I/O capacity: Can be configured to handle any combination of discrete I/O and analog I/O, with a maximum number of 1024 discrete input, 1024 discrete output, 64 analog input words, and 64 analog output words.
Communication interface: Has a 15-pin RS-422/485 compatible serial port and a 9-pin IC66* handheld monitor port.
Supported system: It is part of GE Fanuc Series 90-70 PLC system, which supports DCS system, mainly used in industrial automation production environment.

SCXI-1104C

¥6,238.00
Parameters and specifications:
Number of channels: Multiple channels are supported, typically 32 single-ended or 16 differential input channels.
Resolution: A high-resolution ADC that provides highly accurate data acquisition.
Sampling rate: Depends on the specific model and application requirements.
Input voltage range: ±10 V, suitable for a variety of common signal types and voltage standards.
Input impedance: 1 MΩ || 5 pF to ensure stable signal transmission.
Interface: Support a variety of interface options, such as USB, PCI, PXI and Ethernet, easy to connect with the computer or control system.

JRMSP-PS60AV

¥6,205.00
Parameters and specifications:
Brand: JRMSP (possibly a product line of Yaskawa Electric)
Type: May be a control module or similar component
However, due to the limited specific information of the “JRMSP-PS60AV”, no direct parameter and specification information is generally provided. It may be a component in a particular device or system, and its detailed parameters and specifications may depend on the overall design and requirements of that device or system.

3503E

¥5,260.00
Parameters and specifications:
Model: Digital Input Module 3503 EN2 (EDI 5909)
Voltage: 24 volts AC /DC
Number of inputs: 32 inputs, 8 in a group
Input frequency range: DC or 47.63 Hz
Recommended input range: 20-42.5 volts DC
Maximum voltage: 42.5 volts AC/DC