Parameters and specifications
Model: IC693CPU360-DH.
Speed: 150MHZ.
Output: 32.
Power consumption: 2.6W.
Rated voltage: 120V AC.
Frequency: 47-63 Hz.
Output frequency range: 10Hz to 6000Hz.
Rated voltage range: 120V~230V.
Certification standard: CE.
Size and weight
Size: 193232mm (approximate size).
Weight: 0.19 kg.
Parameters and specifications
Brand: Emerson.
Model: KJ3203X1-BA1.
Application fields: Environmental protection, chemical industry, geology and mining, energy, aerospace, etc.
Possible as: displacement module processor module, DI 32 channel DCS card.
Manufacturer: In some cases, such as search results [5], KJ3203X1-BA1 is associated with WESTINGHOUSE, but usually with Emerson.
Size and weight
Specific size and weight: Specific size and weight information is not directly given in the search results.
Parameters and specifications
Model: IC697CMM742.
Main application: This module is mainly used in the 90-70 series PLC (Programmable logic controller) system.
Network Protocol support: Supports a variety of network protocols, such as IEEE 802.2 Logical Link Control Class I LAN and IEEE 802.3 Media Access Control 10Mbps LAN.
Network port: It has three network ports, including 10Base-T RJ-45 port, 10Base2 BNC port and AUI port.
Communication rate: The maximum communication rate of 1Mbps is supported.
Supported communication protocols: Modbus RTU, Modbus ASCII, Profibus DP, etc.
Voltage and current: Absorb 2 amps of large backplane current at +5 volts DC and 0.5 amps of large backplane current at +12 volts DC.
Operating voltage range: 85~264VAC.
Output voltage: 24VDC.
Output power: 360W.
Input current: 500mA.
Parameters and specifications
Make and Model: Yaskawa SGMGH-13DCA6C model.
Rated output: 7.0kw.
Supply voltage: ac200v.
Serial encoder: 20-bit pair type (standard).
Shaft end: straight shaft, with keyway, with screw hole (optional).
Optional: With holding brake (dc24v).
Rated time: continuous.
Vibration level: V15.
Insulation resistance: dc500v, more than 10mΩ.
Ambient temperature: 0 ~ 40°C.
Excitation mode: permanent magnet.
Installation mode: Flange type.
Parameters and specifications
Make and Model: GE IC693BEM341 series.
Usage: Usually used in industrial automation and control systems, as a PLC (programmable logic controller) communication or processing module.
Specific parameters and specifications: The IC693BEM341 may be a GE product series, and its specific parameters and specifications may vary according to different application scenarios and product versions. In general, GE’s COTS rugged system family is based on 3U VPX and CompactPCI architectures, with 2-, 3-, 4- and 5-slot chassis options, and uses Intel or Freescale processors.
series
Series: IC693BEM341 is one of the COTS hardening system series products provided by GE.
Parameters and specifications
Input range: Depending on the search results, there are two possible parameters. One is -20 mA to 20 mA (for Westinghouse products); The other does not specify the input range, but mentions that it is an analog output PLC (Programmable logic controller) module, which is mainly responsible for converting the digital signal or analog signal inside the PLC into an analog signal output that can control external devices.
Output range: For Westinghouse products, the output range is 4 mA to 20 mA. For Emerson products, the output voltage range may be 5VDC (but this information may not directly correspond to the 5X00062G01 model).
Accuracy: ±0.1%FS (for Westinghouse products only).
Resolution: 12 bits (for Westinghouse products only).
Response time: less than 250 ms (for Westinghouse products only).
Power supply voltage: For Westinghouse products, 24 VDC; For Emerson products, the input voltage range may be 12-48VDC.
Power consumption: Less than 5 W (for Westinghouse products only).
Operating temperature: Westinghouse products are -40°C to 85°C; Emerson’s products range from -20°C to +50°C.
Storage temperature: Emerson products range from -40°C to +70°C.
Parameters and specifications
Model: ICMK14F1 DC24V
Voltage: 24V DC
Current: 100-400AA (Note that “AA” here may be A mistake, usually the unit of current should be “mA” or “A”). But based on search results, direct quote here)
Year: Produced in 2020
Operating temperature: 60℃
Application: Suitable for a variety of applications, especially in the chemical industry widely used
series
The ICMK14F1 DC24V is a system displacement module under the ABB brand, but there is no clear family name.
Parameters and specifications
Working voltage: Usually 220V.
Power supply: external 220V/AV power socket, as the PLC working power supply.
Control accuracy: According to the search results, the specific control accuracy parameters (such as indicating accuracy, recording accuracy, etc.) may vary by model and application scenario, but usually have a high control accuracy.
Size and weight
Size: Specific size information varies from source to source, but usually includes three dimensions: length, width, and height. For example, the size mentioned in some search results is 12511547 (length, width and height).
Weight: According to the search results, PBSE5117 weighs about 0.46kg, but other sources also mention a weight of 2KG. Please note that the exact weight may vary by model and manufacturer.
Parameters and specifications
Brand: GE (US General Electric)
Model: IC670GBI102C
Type: Industrial power module
Structure: modular
Installation mode: Onsite installation
series
The IC670GBI102C is a model in GE’s series of industrial power modules.
