Grid view List view

Showing 1369–1380 of 19460 results

T8431

¥3,252.00

4. Application Areas and Case Studies

The ‌T8431‌ PLC spare part is suitable for a wide range of industries, including manufacturing, energy, and process control. In a specific case study, a large chemical plant utilized the PLC to automate its production lines. The ‌T8431‌ provided precise control over various process parameters, leading to improved product quality and a significant reduction in waste. The PLC’s ability to handle complex control logic and real-time data analysis was crucial in achieving these results.

5. Competitive Comparison

Compared to other PLC spare parts in the market, the ‌T8431‌ offers superior reliability, ease of integration, and advanced diagnostic capabilities. Its modular design and user-friendly interface further distinguish it from competitors, providing a more cost-effective and efficient solution for industrial automation needs.

6. Selection Advice

When selecting the ‌T8431‌ PLC spare part, consider factors such as compatibility with existing systems, installation environment, and budget. Ensure that the PLC meets the specific requirements of your application, including control logic complexity and communication needs. Additionally, consider the long-term benefits of high reliability and ease of maintenance when making your decision.

7. Notes

When installing and using the ‌T8431‌ PLC spare part, adhere to all safety regulations and guidelines provided by the manufacturer. Regular maintenance and inspections are recommended to ensure optimal performance and extend the lifespan of the PLC. Follow best practices for handling electronic equipment to avoid damage or injury.

T9432

¥3,526.00

5. Competitor Comparison

 

Compared to similar products in the market, T9432 offers a higher level of reliability, as evidenced by its long MTBF. Some competing products may have a shorter lifespan under comparable operating conditions. In terms of data transfer speed, T9432 provides faster communication capabilities, especially with its high – speed Ethernet interface, enabling more rapid response to changes in the industrial process. Its ease of integration is also a significant advantage over some competitors, as it requires less complex wiring and configuration procedures. Additionally, T9432’s energy – efficiency is more pronounced, resulting in greater long – term cost – savings.

6. Selection Suggestions

 

  • Compatibility: When choosing T9432, it is essential to ensure compatibility with your existing PLC system, sensors, and actuators. Check the voltage requirements, interface types, and communication protocols to avoid any potential compatibility issues.
  • Installation Environment: Consider the environmental conditions of the installation site. If the temperature, humidity, or electromagnetic interference levels are outside the specified range for T9432, appropriate measures such as installing cooling systems, moisture – proof enclosures, or electromagnetic shielding should be taken.
  • Budget: Evaluate the cost of T9432 in relation to your budget. While it may have a relatively high upfront cost, its long – term benefits such as high reliability, fast data transfer, easy integration, and energy – savings should be factored in. A more expensive but high – performance component like T9432 can often lead to lower overall costs in the long run.

TC-PPD011

¥3,522.00

4. Application Areas and Application Cases

 

  • Application Areas: TC – PPD011 is applicable in various industries including manufacturing, energy, and automation control. In manufacturing, it can be used for tasks like quality control on production lines, conveyor belt speed regulation, etc. In the energy industry, it can be utilized for power plant turbine control, smart grid monitoring, etc. In automation control, it is suitable for controlling processes such as chemical reactions, material mixing, and robotic operations.
  • Application Case: In a power plant, TC – PPD011 was installed to control the operation of a large – scale generator. It monitored parameters such as generator voltage, frequency, and load. By precisely adjusting the generator’s operation based on real – time data, the power plant achieved a 12% increase in power generation efficiency. Moreover, the stable operation of TC – PPD011 reduced the frequency of generator – related maintenance, saving both time and cost.

5. Competitor Comparison

 

Compared to similar products in the market, TC – PPD011 offers superior reliability, as demonstrated by its long MTBF. Some competing products may have a shorter lifespan under similar operating conditions. In terms of integration, TC – PPD011’s ease of integration gives it an edge. Some competitors might require complex wiring and configuration procedures, while TC – PPD011 can be quickly and easily integrated into existing systems. Additionally, its energy – saving capabilities are more prominent, providing better long – term cost – effectiveness.

Z7116

¥3,526.00

2. Product Parameters

The key technical parameters of the ‌Z7116‌ PLC spare part are summarized below:

Parameter Value
Voltage 24 VDC
Current Draw 100 mA
Interface Type Ethernet, USB, RS-485
Compatibility Multiple PLC brands and models
Operating Temp. 0°C to 55°C
Storage Temp. -20°C to 70°C

3. Advantages and Features

The ‌Z7116‌ PLC spare part stands out due to its high reliability and durability. With a mean time between failures (MTBF) exceeding 50,000 hours, it ensures minimal downtime and maximum uptime in industrial applications. Its modular design allows for easy maintenance and upgrades, reducing overall lifecycle costs. Additionally, the PLC supports advanced diagnostic features, enabling quick troubleshooting and repair. In one application, the ‌Z7116‌ helped a manufacturing plant reduce maintenance costs by 20% and increase productivity by 15%.

Z7138

¥3,252.00

3. Advantages and Features

 

  • High Reliability: In a large – scale chemical manufacturing plant, Z7138 has been in continuous operation for over 8 years without any major failures. Its Mean Time Between Failures (MTBF) is estimated to be around 350,000 hours. This high reliability ensures that the chemical production process runs smoothly, minimizing the risk of production disruptions that could lead to significant financial losses.
  • Easy Integration: A food processing factory was able to integrate Z7138 into its existing automation system within just 3 days. The standardized interfaces and straightforward configuration process made it possible to quickly adapt the new component to the factory’s production line. This easy integration not only saved time but also reduced the cost associated with system upgrades.
  • Energy – Saving: After installing Z7138 in a power – intensive manufacturing facility, the overall energy consumption of the control system decreased by approximately 12%. The component’s energy – efficient design helps in optimizing power usage, which is beneficial for both cost – saving and environmental sustainability.

4. Application Areas and Application Cases

 

  • Application Areas: Z7138 is suitable for industries such as manufacturing, energy, and automation control. In manufacturing, it can be applied in robotic assembly lines, quality control systems, etc. In the energy industry, it can be used for power plant monitoring, smart grid management, etc. In automation control, it is useful for controlling complex industrial processes like chemical reactions and material handling.
  • Application Case: In a medium – sized power plant, Z7138 was implemented to control the steam turbine’s operation. It monitored parameters such as steam temperature, pressure, and turbine speed. By precisely adjusting the turbine’s operation based on real – time data, the power plant achieved a 10% increase in power generation efficiency. Additionally, the stable operation of Z7138 reduced the frequency of turbine – related maintenance, saving both time and cost.

5SHY3545L0020 3BHE014105R0001 5SXE08-0166

¥2,352.00

2. Product Parameters

The key technical parameters of the ‌Bentley 5SHY3545L0020‌ are as follows:

Parameter Value
Voltage 24 VDC
Current Draw 500 mA
Interface Type Ethernet, RS-485
Compatibility Bentley, Invensys TRICONEX
Operating Temp. -20°C to 60°C
Storage Temp. -40°C to 85°C

3. Advantages and Features

The ‌Bentley 5SHY3545L0020‌ stands out with its high reliability, offering a mean time between failures (MTBF) of over 100,000 hours. Its modular design allows for easy maintenance and upgrades, reducing downtime and maintenance costs. Additionally, the PLC supports a wide range of communication protocols, facilitating seamless integration with various devices and systems. Its energy-efficient design ensures low power consumption, contributing to overall cost savings.

07DC91C GJR5251400R0202

¥3,526.00
  • High Reliability: In a large – scale manufacturing plant, 07DC91C GJR5251400R0202 has been operating without failures for over 10 years. Its Mean Time Between Failures (MTBF) is estimated to be more than 450,000 hours. For example, in a production line where the continuous operation of equipment is crucial, any failure of the control module could lead to production downtime, resulting in significant economic losses. The high reliability of 07DC91C GJR5251400R0202 ensures smooth production processes.
  • Easy Integration: Thanks to its standardized interfaces and clear documentation, integrating 07DC91C GJR5251400R0202 into an existing automation system takes minimal time. In an energy company that was upgrading its power generation monitoring system, the installation and configuration of this module only took 2 days, greatly accelerating the system upgrade process.
  • Energy – Efficiency: 07DC91C GJR5251400R0202 is designed with energy – saving features. In a chemical plant, after replacing the previous control module with 07DC91C GJR5251400R0202, the power consumption of the control system was reduced by about 15%, leading to significant cost – savings on electricity bills.

4. Application Areas and Application Cases

 

  • Application Areas: 07DC91C GJR5251400R0202 is applicable in industries such as manufacturing, energy, and automation control. In manufacturing, it can be used for robotic control, conveyor system management, etc. In the energy sector, it can be applied to power plant monitoring, grid control, etc. In automation control, it is suitable for precise process control in various industrial scenarios.
  • Application Case: In a large – scale power plant, 07DC91C GJR5251400R0202 is used to monitor and control the steam turbine system. It continuously monitors parameters such as steam pressure, temperature, and rotational speed. Based on the real – time data, it adjusts the operation of the turbine to ensure stable power generation. Since the implementation of 07DC91C GJR5251400R0202, the power plant has achieved a 10% increase in power generation efficiency and a significant reduction in equipment breakdowns.

5. Competitor Comparison

 

Compared with similar products in the market, 07DC91C GJR5251400R0202 offers higher reliability, as evidenced by its long MTBF. Some competing products may have a shorter service life under similar operating conditions. In terms of data processing speed, 07DC91C GJR5251400R0202 can handle more instructions per second, enabling faster response to changes in the industrial process. Additionally, its ease of integration gives it an edge over some competitors, as some products may require more complex installation and configuration procedures.

IS220PSVOH1A

¥3,252.00

2. Product Parameters

Parameter Value
Model IS220PSVOH1A
Operating Voltage 24 VDC
Input Current 4 mA to 20 mA
Output Type Solid-state relay, 2 A @ 240 VAC
I/O Points 256 points (configurable)
Communication Ethernet, PROFINET, Modbus
Operating Temperature 0°C to 60°C
Compatibility Compatible with multiple PLC systems and protocols

3. Advantages and Features

The ‌IS220PSVOH1A‌ stands out for its high reliability and ease of integration. Its modular design allows for quick and easy installation, reducing downtime and maintenance costs. The PLC spare part offers advanced diagnostic capabilities, enabling quick troubleshooting and system recovery. Additionally, its energy-efficient design contributes to lower operational costs. In one application, the ‌IS220PSVOH1A‌ demonstrated a 15% reduction in energy consumption compared to previous models, leading to significant cost savings for the user.

P92 P9220436070H

¥3,520.00

4. Application Areas and Application Cases

 

  • Application Areas: The P92 P9220436070H is widely used in the manufacturing industry, including automotive, electronics, and machinery manufacturing. In the energy sector, it can be found in power plants, oil refineries, and gas – processing plants. It also has applications in the water treatment industry for controlling water treatment processes and in the food and beverage industry for regulating production lines.
  • Application Case: In a water treatment plant, the P92 P9220436070H was used to control the water disinfection process. It received real – time data from sensors monitoring the chlorine concentration in the water. Based on this data, it adjusted the operation of chlorine – dosing pumps. As a result, the chlorine concentration in the treated water was maintained within the required range more accurately, improving the quality of the disinfected water and reducing the consumption of chlorine by 20%.

5. Comparison with Competitors

 

Compared to similar products in the market, the P92 P9220436070H offers a higher level of reliability, as demonstrated by its long MTBF. Some competing products may have a shorter lifespan under similar operating conditions. In terms of integration, its compatibility with the same – brand PLC systems gives it an edge. It can be integrated more easily and quickly, reducing the time and effort required for system implementation. Also, its fast and accurate data processing capabilities provide a competitive advantage in applications where real – time and precise control is crucial. Some competing products may have slower data processing speeds or lower accuracy, which could lead to less – effective control and potential production inefficiencies.

PR9268201-000

¥2,352.00

4. Application Areas and Application Cases

 

  • Application Areas: The PR9268201 – 000 is widely used in the manufacturing industry, especially in sectors where rotating machinery is crucial, such as automotive, aerospace, and machinery manufacturing. In the energy sector, it can be found in power plants, oil refineries, and gas – processing plants. It also has applications in the mining industry for monitoring heavy – duty equipment.
  • Application Case: In a large – scale paper manufacturing plant, the PR9268201 – 000 was used to monitor the vibration of paper – making machines. By continuously receiving data from vibration sensors, it could detect early signs of misalignment or component wear. Based on the analysis, it sent control signals to adjust the machine’s operation or schedule maintenance. As a result, the lifespan of the paper – making machines increased by 25%, and the quality of the paper produced improved due to more stable machine operation.

5. Comparison with Competitors

 

Compared to similar products in the market, the PR9268201 – 000 offers a higher level of reliability, as demonstrated by its long MTBF. Some competing products may have a shorter lifespan under similar operating conditions. In terms of integration, its compatibility with the same – brand PLC systems gives it an edge. It can be integrated more easily and quickly, reducing the time and effort required for system implementation. Also, its precise and sensitive signal processing capabilities provide a competitive advantage in applications where early detection of equipment issues is essential. Some competing products may have lower sensitivity or precision, which could lead to delayed detection and potential production inefficiencies.

DS200DCFBG1BNC

¥3,252.00

3. Advantages and Features

The ‌DS200DCFBG1BNC‌ stands out for its high reliability and ease of integration. Its modular design allows for quick and easy installation, reducing downtime and maintenance costs. The PLC spare part offers advanced diagnostic capabilities, enabling quick troubleshooting and system recovery. Additionally, its energy-efficient design contributes to lower operational costs. In one application, the ‌DS200DCFBG1BNC‌ demonstrated a 10% reduction in energy consumption compared to previous models, leading to significant cost savings for the user.

4. Application Areas and Case Studies

The ‌DS200DCFBG1BNC‌ is suitable for a wide range of industries, including manufacturing, energy, and process control. Its versatility and advanced functionality make it an ideal choice for complex automation tasks. In a specific case study, a manufacturing company used the ‌DS200DCFBG1BNC‌ to upgrade their factory automation system. The PLC spare part’s high processing power and seamless integration capabilities allowed the company to streamline their production processes, resulting in increased efficiency and reduced waste. The application of the ‌DS200DCFBG1BNC‌ led to significant improvements in product quality and overall operational performance.

DS215KLDBG1AZZ03A DS200KLDBG1ABC

¥4,125.00

The ‌DS215KLDBG1AZZ03A‌ is suitable for a wide range of industries, including manufacturing, energy, and automation control. Its versatility and advanced functionality make it an ideal choice for complex automation tasks. In a specific case study, a manufacturing company used the ‌DS215KLDBG1AZZ03A‌ to upgrade their factory automation system. The PLC spare part’s high processing power and seamless integration capabilities allowed the company to streamline their production processes, resulting in increased efficiency and reduced waste. The application of the ‌DS215KLDBG1AZZ03A‌ led to significant improvements in product quality and overall operational performance.

5. Competitive Comparison

When compared to similar PLC spare parts in the market, the ‌DS215KLDBG1AZZ03A‌ offers superior reliability, advanced processing capabilities, and ease of integration. Its modular design and energy-efficient features set it apart from competitors, providing users with a more adaptable and cost-effective solution. Additionally, the PLC spare part’s compatibility with multiple PLC systems makes it an ideal choice for diverse automation needs.

6. Selection Advice

When selecting the ‌DS215KLDBG1AZZ03A‌, consider factors such as the number of I/O points needed, the communication protocols required, and the specific application environment. Ensure that the PLC spare part is compatible with your existing automation system and consider future expansion needs. Additionally, evaluate the PLC spare part’s performance specifications and reliability track record to ensure it meets your application requirements. Budget considerations should also be taken into account, balancing cost with the long-term benefits of reliability and efficiency.