Grid view List view

Showing 13621–13632 of 19460 results

140CRA21110

¥5,265.00
Parameters and specifications:
Product line: Modicon Quantum automation platform.
Product type: DIO descent interface.
Number of ports: 1.
Rated supply voltage: 115/230 V.
Supply voltage range: 85-276 V.
Power supply frequency: 47-63 Hz.
Supply current: 0.2A (115 V), 0.4A (230 V).
Large surge flow: 10 A (115 V), 20 A (230 V).
Rated power: 50 VA.
Fuse current with fuse: 1.5A.
Output voltage: 5.1V.
Rated output current: 3 A.
Input/Output bytes: 30 I/32 O.

AI830

¥3,520.00
Parameters and specifications:
Series: ABB series.
Function: The AI830 is usually an analog input card or module used in industrial automation control systems, especially temperature measurement.
Input type: Temperature measurement via resistance elements such as Pt100, Cu10, Ni100, Ni120 and resistors is supported.
Number of channels: There are usually 8 channels for temperature measurement.
Connection mode: Three-wire connection, all RTDs (resistance temperature detector) must be isolated from the ground.
Resolution: 14-bit resolution.
Temperature conversion: Modules perform linearization and temperature conversion to degrees Celsius or Fahrenheit.
Power frequency filter: The cycle time of the power frequency filter can be set via the MainsFreq parameter to provide a 50Hz or 60Hz notch filter.

DSQC332

¥5,265.00
Parameters and specifications:
Input voltage: 24 volts DC.
Output current: 30 (although some search results mention 20, according to the latest information, the output current is 30).
Number of axes: 2.
Communication mode: Ethernet, RS-232, RS-485.
Data bus: 24-bit address bus, 16-bit data bus, support 32-bit data operation.
I/O channels: 2 8-bit dual-function I/ OS, 1 7-bit dual-function I/O, 16 to 44 analog input channels.
Clock frequency: Under 4.194MHz crystal oscillator, the system clock can reach 20.97MHz.

FBM242

¥4,152.00
Parameters and specifications:
Signal output: The FBM242 provides 16-channel external source solid-state switching output with channel isolation, provided by the terminating assembly.
Rated voltage and current:
AC load: Inductive load up to 2A or 20mH at 132V AC (without suppressor).
DC load: Inductive load up to 2A or 50mH at 150V DC (no suppressor).
Surge current: 20A peak, duration is 16 milliseconds.
Leakage current: less than 1mA.
On-resistance: less than 100 milliohm at 20°C.
Heat dissipation: Maximum 7.0W.
Fuse: 5 x 20mm, rated 3.15A (temperature reduced to maximum 2A).
End cable connection: 37 pin male head D-subminiature.
End cable Type: Type 4.
Color: Dark blue, representing discrete type.
Power requirements: Input voltage range (redundancy) 24V dc +5%, -10%, 3W (Max.) for 24V dc consumption, 3W (Max.) for 24V dc heat dissipation.
Size and weight:
Dimensions: Length x width x height 10.4 cm x 4.5 cm x 11.4 cm.
Weight: 0.284 kg.

1C31132G01

¥6,235.00
Parameters and specifications:
Brand: Emerson.
Model: 1C31132G01.
Points: 512 or more (large).
Structure form: integral. 1
*]^. Installation mode
* : ** Module measurement accuracy.
Series:
This model may belong to the Emerson Ovation series or other related series.

140CRA93100

¥6,203.00
Parameters and specifications:
Series: Modicon Quantum series.
Product type: RIO Remote adapter module.
Number of I/O expansion modules: 27
Bus current requirements: 240 mA (there are also references to 600 MA).
Power consumption: 2 W (also mentioned as 3 W).
Addressing requirements: 9 input words.
Analog input resolution: 12 bits.
Input impedance: 50 volts DC 25 MA, 250 ohms current.
Accuracy error: +/ -0.1% or +/ -0.05% of full scale.
Linear error: +/ -0.04%.
Isolation between channels and buses: 3000 volts DC for 60 seconds, 1000 volts DC.
Communication protocols: Modbus, Ethernet, OPC, etc.

1C31224G01

¥5,265.00
Parameters and specifications:
Brand: Emerson/ Emerson or Westinghouse/ Westinghouse (different suppliers may label the brand differently).
Model: 1C31224G01.
Structure: modular.
Control mode: Installation in control room.
Control principle: Other.
Processor: Possibly LD instruction processor, hard PLC.
Signal range: Configurable in the field to provide isolation up to 3500 Veff (isolation is model specific).
Uses: It is used to receive a variety of input signals such as AC and DC voltage and current, frequency, temperature (thermocouple and RTD), and process sensors, and provides 4 to 20 mA or 0 to 10 Vdc standard signal output.

IC695CHS012

¥4,521.00
Parameters and specifications:
Series: GE Fanuc RX3i PACSystems series.
Number of slots: 12.
Supported I/O types: PCI (IC695) and serial (IC694) based I/O.
Power specifications: Internal power supplies use 240 mA@5 VDC and 600 mA@3.3VDC.
Internal power consumption rating: 600 mA at 3.3 V DC and 240 mA at 5 V DC.

140NOE77100

¥5,265.00
Parameters and specifications:
Brand: SCHNEIDER/ Schneider.
Type: CPU module, Ethernet network TCP/IP module.
Voltage: 24V.
Current: 100-400A (Note: this may be a range and the exact value may vary by application or configuration).
I/O count: PN/DP.
Program capacity: 2048.
Firmware version: V1.0.0.
System environment: Stable.
Color: Black.

125840-01

¥4,151.00
Parameters and specifications:
Series: Part of the Bently Nevada 3500 series bearing vibration monitor.
Power supply voltage: 24 volts DC.
Consumption: 5 watts.
Operating temperature range: -40 to +85°C (-40 to +185°F).
Size and weight:
Size: The exact size is not directly mentioned in the search results, but a search result for 125840-01 350015 card mentions the size 50mm x 30mm x 5mm, but please note that this may not be the exact size of 125840-01.
Weight: In the search results described as a two-axis vibration monitor, it weighs 0.6 kg. In another search result describing a power module, the weight was 2KG. This may be a 125840-01 product of a different model or purpose.

AI810

¥5,265.00
Parameters and specifications:
Input voltage: 24V DC.
Input current: Support 0… 20 mA, 4… 20 mA, 0… 10 V or 2… 10 V.
Output voltage: 0-10V DC.
Output current: 4-20mA.
Operating temperature range: -20°C to +60°C.
Storage temperature range: -40°C to +85°C.
Protection level: IP20.
Number of channels: 8.
Resolution: 12 bits.
Fault protection function: overload protection, short circuit protection, overvoltage protection, etc.

TP867

¥4,152.00
Parameters and specifications:
Series: Siemens Industrial automation product line.
Main functions: Used in data communication and control system.
Communication interface: Optical fiber communication interface, supporting optical fiber transmission technology.
Input and output functions: contains digital input and output functions for receiving and sending digital signals, supporting the processing of switching and logic control signals.
Communication protocols: Support standard industrial communication protocols, such as PROFIBUS, PROFINET, etc.